Thank you thank you so much. I cant wait to start using this. I believe i have black diamonds on this antique sterling silver cross. Then I've been holding onto this old antique watch wrist band thing. It looks gold and it has 2 diamonds on each end. Literally looks like a Watch band but metal, gold so maybe i got something. When i go to polish that cross. It us so sparkly and beautiful. Def gotta be something. Never knew Black diamonds existed. When i first got that. I was like, "hey these kinda look like they are black". Look at that they do exist. The cross is like the size of like a quarter but covered with "diamonds". Hopefully. 🤞🏼💎👑❤️🌍
@@yhungkari It wouldn't make that noise with the fingers on the plate at the back. How long have you had your device, by what you are saying I would take the item back you are covered by the Sales of Goods Act for six years. If by the sounds of it, you wouldn't have used it, this is so the older the device is they can try a knockoff ware and tare the usage of the item over the period you have had it. No shop is allowed whatever their company policy is, under law, you have the right to a repair, replacement, or refund and this is a legal right always be careful what you allow them to do you can walk into a remedy without knowing.
Играчка! Моят показва диаманти на всяко докоснато паве от улицата! Аз замервам плътността на веществото, специфичното тегло, но и този метод не е точен, защото има много минерали и камъни с еднакво или близко по стойност специфично тегло, плътност! Трудно се разпознават скъпоценните камъни!
WRONG, WRONG, WRONG!!! You are touching the metal of the piece, that is why it's making the continues beeping. It should Beep 3 times, pause, then Beep 3 times.
Can you help me? I have it down to zero volume because essentially if you turn it up, you’re cheating and it’s gonna read it so I have mine too less than 1 and when I test it goes all the way up to the red and just makes a beep a pause a beep a pause a beep etc .
I thought the sound your getting was a sound of metal conducteur... I thought diamond as a different sound? And does, it has to be lit up all the way to the end to be diamond ? I tested my wedding ring and it sounded different than this video and went up to 1 red light, not to the end. Isn't the quality of the diamond that will make it lighting up red until the end? With the diamond sound? and of course, not like this any feedbackwould be gladly appreciated, thanks
Do I keep my finger on the metal back panel at all times? Like for example... Let's say the diamond is in a ring or a watch or something. Would i just hold the watch etc with my bare hands and still touch the metal back panel? Or do i Just hold the item and not touch the finger on the back panel? You know? Im confused about that for some reason lol.
I don’t get it. What kind of beep is it supposed to make mine just makes beeps every second and it goes up to the red bar even when I turn the volume to zero.
Well that's fantastic that you have the 9-volt battery in there, but can you show how to put the battery in there? I have a GE brand Diamond selector 2, and I have no idea how to put the battery in this thing, and no I'm not stupid, generally is not straightforward
You're not testing those right. If the point of the tester comes into contact with the metal around the diamond, the tester lights will go all the way to red and continuously beep like yours did. You were touching metal. You're supposed to hold the tester straight up and down and touch the center of the stone only and if it's a diamond the light panel should show red and beep 3x. That indicates a diamond.
the sound your tester makes is when you touch the metal not the gem. So you got it all wrong there bud. If you touch the gem. the beeping will be less frequent.
Thank for getting straight to the point instead of these people posting 15-17 min videos 👏🏾
We like long form videos who wants to waste time on a 10 min video that leaves out tons of info and rush everything to fit 10 minutes
Bro sitting ina cold ass room
Dude can see his breath if he looks closely
That's what I was saying. I got up and looked at my temperature thing lmao. Oh woah 😆 Good video tho. 💎👑💯
Thank you so so so much!! The instructions included with it are almost impossible to decipher !
Thanks for this. i just got this today and didn't have a clue what to do till i saw your video,now i do 😂
You're touching on the metal when it makes that continuous chirping sound. Also, the tip cannot be slanted when touching the stone.
Bro! How is your room below 10°C??
That's like a refrigerator temperature. 🥶
10 Degree Celcius that equal to 50 Degree Fahrenhait
@@angelovaldiviezothat’s still cold asf my house sits at a cool 78 but I’m in arizona
Thank you thank you so much. I cant wait to start using this. I believe i have black diamonds on this antique sterling silver cross. Then I've been holding onto this old antique watch wrist band thing. It looks gold and it has 2 diamonds on each end. Literally looks like a Watch band but metal, gold so maybe i got something. When i go to polish that cross. It us so sparkly and beautiful. Def gotta be something. Never knew Black diamonds existed. When i first got that. I was like, "hey these kinda look like they are black". Look at that they do exist. The cross is like the size of like a quarter but covered with "diamonds". Hopefully. 🤞🏼💎👑❤️🌍
You are testing the metal that's why it's making a funny noise. It should beep not a brrrr sound as that is touching metal.
thats the sound it makes whenever i put my fingers on that metal plate on the back
@@yhungkari It wouldn't make that noise with the fingers on the plate at the back. How long have you had your device, by what you are saying I would take the item back you are covered by the Sales of Goods Act for six years. If by the sounds of it, you wouldn't have used it, this is so the older the device is they can try a knockoff ware and tare the usage of the item over the period you have had it. No shop is allowed whatever their company policy is, under law, you have the right to a repair, replacement, or refund and this is a legal right always be careful what you allow them to do you can walk into a remedy without knowing.
@@martinisherwood2854 my bad it’s because I was touching the metal that the diamond was set in instead of the actual diamond itself.😂😂
@@yhungkari Well all fixed then. It won't tell, the difference between a diamond and a moissanite
@@martinisherwood2854 but they come with a small metal plate to place diamond on when testing....why is that?
Играчка!
Моят показва диаманти на всяко докоснато паве от улицата!
Аз замервам плътността на веществото, специфичното тегло, но и този метод не е точен, защото има много минерали и камъни с еднакво или близко по стойност специфично тегло, плътност!
Трудно се разпознават скъпоценните камъни!
WRONG, WRONG, WRONG!!! You are touching the metal of the piece, that is why it's making the continues beeping. It should Beep 3 times, pause, then Beep 3 times.
Bro could touch his finger with it and it’s gonna be a diamond according to his analogy 💀
What's the proper way of testing?? I have diamond necklaces I have to test 🤔🤔
Can you help me? I have it down to zero volume because essentially if you turn it up, you’re cheating and it’s gonna read it so I have mine too less than 1
and when I test it goes all the way up to the red and just makes a beep a pause a beep a pause a beep etc .
So, this means I need to keep a thermometer with me?
I thought the sound your getting was a sound of metal conducteur... I thought diamond as a different sound? And does, it has to be lit up all the way to the end to be diamond ?
I tested my wedding ring and it sounded different than this video and went up to 1 red light, not to the end.
Isn't the quality of the diamond that will make it lighting up red until the end? With the diamond sound? and of course, not like this any feedbackwould be gladly appreciated, thanks
Nah it only needs to beep red. Doesn’t matter how many red. And usually beeps 3 times
Do I keep my finger on the metal back panel at all times? Like for example... Let's say the diamond is in a ring or a watch or something. Would i just hold the watch etc with my bare hands and still touch the metal back panel? Or do i Just hold the item and not touch the finger on the back panel? You know? Im confused about that for some reason lol.
I don’t get it. What kind of beep is it supposed to make mine just makes beeps every second and it goes up to the red bar even when I turn the volume to zero.
Learning so much from the comments.
Hi this is not true and all diamond tester not ready good and if vvsi moissanite stone can press diamond tester show this is diamond please
So if it hits one of the reds its a diamond?
Well that's fantastic that you have the 9-volt battery in there, but can you show how to put the battery in there? I have a GE brand Diamond selector 2, and I have no idea how to put the battery in this thing, and no I'm not stupid, generally is not straightforward
Meilleur testeur praesidium 🎉🎉🎉🎉
Brilliant demo thank you clear and to the point. Excellent information.
You're not testing those right. If the point of the tester comes into contact with the metal around the diamond, the tester lights will go all the way to red and continuously beep like yours did. You were touching metal. You're supposed to hold the tester straight up and down and touch the center of the stone only and if it's a diamond the light panel should show red and beep 3x. That indicates a diamond.
How do you determine the volume because if you turn it up it’s gonna go up to the red much faster it’s essentially like you’re cheating
Any topl to tell if diamond is ef or gh
Doubt that it's below 10 degrees celsius
Hi is it work for sapphire £ emerald
Is it good for Gold?
Got mine yesterday from Amazon and it came with a 9v battery.
Amazing
My dimmond tester not turning on
That you so much this was so helpful
Not that helpful when all info is wrong. 😂😂
Mine just says lamp on battery ok no matter what I do ima just refund absolutely terrible but what can I say it’s less than 20$
I used it in my keys in it went straight up 😂
Ret kya h sir
I like this
You touched the metal
uwwww Heart this if ur Not sus
the sound your tester makes is when you touch the metal not the gem. So you got it all wrong there bud. If you touch the gem. the beeping will be less frequent.
Haw mach thise tester
I tested a metal table with it it passed as a diamond the thing is fake
How machi mani to selii
Tsitarii
How do you know the ct.
carat size is determined by weight. One carat is equal to 0.2 grams, and one diamond carat is divided into 100
Si les explications etaient en Francais lse serait tresl pratique ,merci
Dimond tester tells me that day can test the human body plz.
I want to buy diamond selectermacine pi tell me price
Amizon I want to buy diamond selectermacine tell me price
@@rahulbaviskar8280 $20
😂😂😂😂 quello che stai toccando è il metallo!!
bro you must be freezing!
I know right. Below 10°C is like my fridge.
I didnt know that all is from diamond made,it biips on all!!!!
Don't waste your money it's trash others have already showed how this thing tested moissanite's as diamonds so just a heads up.....
Got mine yesterday. WITH a battery. EDIT: ....which is dead 🙄
its not dead i also had the same impression when i got mi e
it should fit before it works
That's not even right tho
My middle finger is a dimond i guess
Not diamond
If you need one of these then you shouldn’t be in the Diamond Business…… Full stop ..
Terrible machine
ruclips.net/user/shortsgMoVscehdsw?si=lz7msUz9gmttGR3Z