🔧Huawei P20 & P20 Pro Glass Only Replacement (success)😎
HTML-код
- Опубликовано: 28 июл 2019
- Hi friends!
This time Huawei P20 Pro. P30 is 99% the same process 👍
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
1. Heat the phone to 80°C (You can use hair dryer)
2. Take off the back glass, screws and battery (use isopropanol or PCC15 spray)
3. Take off the screen and cut the glass (use molybdenum wire)
4. Glue new glass to the screen - better use LOCA that don't need UV lamp (link below)
5. Glue home button with E-8000 or B-7000 glue and glue the screen to the frame
6. Use clamps to make sure it will be waterproof (left for MINIMUM 2 hours!)
7. Take cold cola and enjoy You work
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜 Наука
Great video thanks, just out of interest what is the chemical used for stripping the glue
Just what I was looking for! Do you have a model for the support you use to align screen and digitizer when you glue them? I have a 3d printer and would be great to print it
Swietna robota!!
How did you go about stripping the OLED display from the glass with curved screen of the Huawei P30 Pro?
Do i need to get a new front frame for this repair?
Hi sir
Are you replacing the actual glass screen-touch screen or the glass back
This is a new and good screen .. :D
Hello
Will this work, if my display is working as well as the touch? It seems like only the top of the "glas" is broken
Should I replace the glass or better full Display LCD? I thinks it's much eayser. My display is working, just the glass is broken.
Where do you buy this glass stand, I can not find on the Internet ....
extraordinary... I want to change because it broke, Thank you ....
Cómo se retira el marco dónde va el lector de huella
What type of cleaner You use to clean screen from old glue. It is possibly to damage screen using isopropanol straightly to screen?
Isopropanol
Hello, great video! Thank you for sharing it. I was wondering, is it possible to use a different type of replacement LCD screen (a cheaper one) to attach to this phone, or do I need to get a specific P20 Pro replacement screen? (I'm not talking about the glass, but the whole screen and digitizer).
Hi! You can use not original display, but only OLED. If You use lcd or tft will be terrible 😁 wouldn't fit to the phone housing
@@JerryMobilePL thank you so much for taking the time to reply! So I only want to attach a screen so that I can view documents and files, so that I can transfer them to my new phone. I don't want to continue using the phone. So you're saying I could find a cheaper LCD /TFT screen with the right connecting pins? If so where can I find these? Sorry to take up your time, but thank you so much for the help!
@@hazho9134 oh ok I understand now :D look for "P20 Pro tft display" in Your country local store or ebay / aliexprss. For data transfer will be enough 😄
@@JerryMobilePL you're a hero, thank you so much 🙏 keep making great videos and have a beautiful day!!
@@hazho9134 wish You the same! Thank You and best regards ❤
Apa ini di indonesia.. Lokasi dong min..
Huweui p20 pro display repair korte koto lagbe bolen plz
How much is it man glass of huawei p20 lite sir
how many degrees must the hot hob have when removing the glass from the display and how many minutes should it sit on the hob?
80 degrees and about 2 minutes
What type of glue do you use to fix the screen and the back to the phone?
LOCA glue for front glass, B-7000 glue for back glass
big hello where can i buy this frame so i can paste the glass i can't find it on ebay
Here You can :)
bit.ly/34HZC09
Thanks man...👍👍👍
HOW TO REMOVE OLD LCD GLUE?
great video
Sir what size is the wire? 0.08 - 0.1 work?
0.08
saan banda shop mo boss pagawa ako sau ng unit ko
This video is very detailed. If you need the repair tools in the video, please contact me.
Hi p20 huwei का ग्लास toch chahie
Hii sir huawei p20 pro ka body kaha pe milega
Hume chahiye sir please phone on hai lekin touch screen display bhi damage hai
Fingerprint button after few days say byebye, i like be a external fingerprint button.
Bez autoklawu ?
Bąble przy klejeniu na LOCA trzeba wycisnąć palcami przed utwardzaniem UV. Po uv żaden autoklaw nic nie zmieni 😉
@@JerryMobilePL przed autoklawem , znaczy przed lampą UV. Nigdzie nie napisałem , że po. Ale fakt , po utwardzeniu jest po ptokach.
Catina ka ha man glass screen nahi
Why you are removing everything when u only change the glass?!
Becouse I don't want to destroy parts inside with a glue