🔧iPhone 15 Pro Glass replacement - screen repair 4K video 📱😎
HTML-код
- Опубликовано: 10 янв 2024
- My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
Tips:
- temperature when removing the glass 90°C
- isopropanol for cleaning the screen
- wire thickness 0.006mm
- lamination pressure 4bar
- autoclave 50°C 20min 6bar
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜 Наука
Excellent work, may God bless you always 👍
Good job man 🫡
I noticed alot of people damaged the digitizer because of miss the glass and taking part of the screen with it!….. anyway to show exactly how to use the metal floss and carefully removing the glass? Without damaging the digitizer? Tnx
Brawo Ty 👌
Mam pytanko, jakiej nitki używasz?
Which liquid are you using?
This is how screens should be replaced!!
If the OLED itself and touch aren't broken, then yes!
How much you charge for that?
Nie dajesz wklejki?
Elegancko! Ile stopni na podgrzewaczu?
90*C 😉
Great work! What temp do you use on the heat plate?
Thanks! 90 degrees of Celcius :)
@@JerryMobilePL Thank you! Is that the same for LCD’s? Say XR and 11
i am fond of mobile repering if I want to learn how to work for iphone can you teach me how to work I am working already in pakistan am knowlge all android phones but not iphone.
Hi Jerry,
We did our first 15 pro max screen last week and are experiencing glue deformation after a few days around the dynamic island area.
How do you prevent this?
Hi! Did You used UV after autoclave?
Could you explain how to separate the glass with a heat gun or hair dryer? It is for a home repair of an s21 ultra, how could I measure the temperature and insert the thread so as not to damage the display
Impossible without the machines used in the video
Myslisz serii ze uv cos daje? Bez hejtu po prostu pytanie.
Daje 😁
Nie zawsze szyby z oca są prawidłowo przechowywane (powinny być w chłodnym i ciemnym miejscu) a jeśli nie są to po kilku dniach wychodzą bąble. UV daje pewność że bąble nie powrócą 😊
@@JerryMobilePL ja tak szczerze nie zauwazylem zadnej roznicy. Jesli jest dobrze zalaminowane - dobrze spozycjonowane itp to nic nie wychodzi przynajmniej mi, czy uzywam uv czy nie. Na poczatku byla teoria ze uv niweluje fale, co tez jest kompletna bzdura, teraz dorabiaja teorie o niepowracajacych bąblach. Ja totalnie nie widze roznicy ale kazdy ma swoje doswiadczenia, szanuje.
Szybko rozjebali 😂jaki stopień trudności 1-10?
Hmm.. 😄 nic nie jest trudne jeśli się to potrafi haha
Ten mocniej w ramie siedzi niż poprzednie modele, cały proces podobny
HOW THE FUCK DID HE JUST BREAK THAT PHONE, IT S BEEN ONLY 4 MONTHS SI CE IT WAS RELEASED
This is the life 😄😄
U didn’t put the waterproof seal after taking it out now it will come back next as water damage
Water resistance is a myth. No manufacturer provides a warranty against water damage, and the tightness is max 1 year. It makes no difference whether he used a seal or not. When replacing the glass, it is not possible to seal it like the factory, because Apple does not sell glue between the glass and the frame, because officially the glass itself is not replaceable. Want tightness? Buy a 3x more expensive, factory glued to the glass and frame - OLED screen + seal and enjoy apparent waterproofness.
Newer iphones dont need it! It already has a thick rubber seal connected to the digitizer…. Before it was just aluminum… people added that extra water proof seal and the iphone stuck out the housing a bit….