Would love to see more tuning videos and see what are the more basic fuel and timing adjustments from the tablet itself. Show some more of what the screen can do as far as adjustments go and what self tuning changes in ecu
Can you guys do s video for setting up boost tunes in killshot? Like setting up target afr's and timing at idle/cruise/wot for boost would be super helpful
2004 ls 5.3 lm4 with a Texas speed chop monster cam, 600 lift springs, arms, rods, holly intake. 60 lbs injectors, stock pistons and crank. Would I be able to tune my engine with your system? It’s going in my 1965 malibu. Drive by cable, manual trans.
I have your Jackpot system, I spent over 2500.00 for everything, car does not run right, I contacted your Tec folks and they tell me I need a tuner. I have a stock LS1 You advertise this is self learning, why do I need a tuner?
What happened to this version of the software? I just downloaded the newest version 2.31 and its nothing like this anymore. Looked too much like the Holley software an they made you change it?
is the can bus open or j1939 do you guys have the outputs for the can bus so it can be mapped and put into an aftermarket dash or other digital format screen.
I'm installing a killshot system on a 82 chevy truck with a 350, I doubt I'll need or want to use a laptop to tune, self learning should be fine. My next project is a DIY port fuel injection on a 1954 230 cid flat head inline 6 with a turbo in an old 1954 1 ton 4x4 military truck, I'm gonna want it there for sure. I'm liking what I see from Aces as a company vs the bigger brands.
So I installed my Killshot into my 86 c10 (it’s my daily). First thing I’ll say it it fires right up no problem. Only issue is I’m running really rich and I went from 9mpg in a carb to 5.5 mpg on the Killshot so I know a tune is in order if you have this issue and have a fix you mind letting me know??
@@MrSpectrum Sure thing.I may even make a video with my results.Problem is the truck I'm working with has been sitting for ten years and I've only recently acquired the truck, it's a 1982 K20. 3/4 ton 4x4 and I have no idea what mileage it got before.. I'lll see how it all works out over the next month or so. One of my dual tanks has a hole in it, if I have to buy two new tanks it may be january before I can afford them and a couple of fuel pumps.
Hey everythings cool. Actually spoke to tim, I'm the guy with a turboed LS lemans. Anyways, I think it be cool if you could have 2 can buses so you wouldn't have to unplug it. If it's possible that be great. Do a trans tuning video soon!
would love to see how you got to this page. At the start your hitting buttons not even showing the screen or explaining how to get to the point your at. No where do you mention anything about the laptop and what program you have on the screen. Pretty disappointed with the support for the 2600 dollar system I bought. I should not have to search RUclips for help to install this system.
The REAL WORLD PROBLEM is regular people don’t know what all that sh!z means, what does it matter that you “trimmed the fat” off of something nobody wants to look at because the verbiage, idea and everything else is the same.. MOST ALL SOFTWARE IS FREE
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
Would love to see more tuning videos and see what are the more basic fuel and timing adjustments from the tablet itself. Show some more of what the screen can do as far as adjustments go and what self tuning changes in ecu
I agree I just installed my killshot top end kit and I would like to know what all the settings do
Man if we got a tuning video of tuning a vehicle in real life. That would be very useful
Definitely more tuning videos
This video would be easier to hear and understand without the unnecessary and annoying background music. Audio stinks.
Can you guys do s video for setting up boost tunes in killshot? Like setting up target afr's and timing at idle/cruise/wot for boost would be super helpful
2004 ls 5.3 lm4 with a Texas speed chop monster cam, 600 lift springs, arms, rods, holly intake. 60 lbs injectors, stock pistons and crank. Would I be able to tune my engine with your system? It’s going in my 1965 malibu. Drive by cable, manual trans.
I have your Jackpot system, I spent over 2500.00 for everything, car does not run right, I contacted your Tec folks and they tell me I need a tuner. I have a stock LS1 You advertise this is self learning, why do I need a tuner?
What happened to this version of the software? I just downloaded the newest version 2.31 and its nothing like this anymore. Looked too much like the Holley software an they made you change it?
is the can bus open or j1939 do you guys have the outputs for the can bus so it can be mapped and put into an aftermarket dash or other digital format screen.
I'm installing a killshot system on a 82 chevy truck with a 350, I doubt I'll need or want to use a laptop to tune, self learning should be fine. My next project is a DIY port fuel injection on a 1954 230 cid flat head inline 6 with a turbo in an old 1954 1 ton 4x4 military truck, I'm gonna want it there for sure. I'm liking what I see from Aces as a company vs the bigger brands.
So I installed my Killshot into my 86 c10 (it’s my daily). First thing I’ll say it it fires right up no problem. Only issue is I’m running really rich and I went from 9mpg in a carb to 5.5 mpg on the Killshot so I know a tune is in order if you have this issue and have a fix you mind letting me know??
@@MrSpectrum Sure thing.I may even make a video with my results.Problem is the truck I'm working with has been sitting for ten years and I've only recently acquired the truck, it's a 1982 K20. 3/4 ton 4x4 and I have no idea what mileage it got before.. I'lll see how it all works out over the next month or so. One of my dual tanks has a hole in it, if I have to buy two new tanks it may be january before I can afford them and a couple of fuel pumps.
Can you take timing out per pound of boost or set your own timing map in boost on the killshot haven't hooked it to a pc yet just wondering
Is there a way to change to psi from kpa in the tuning software?
It would be awesome for the PC software to show what VE table is active in the tune and to be able to easily switch VE tables.
I only have a chromebook , can you use it for advance tuning ? or do I need to invest in a pc laptop ?
I would also like to know what laptop software do we need cause I can’t seem to get it to work on my chrome book
Why does your tuning program look different than the one I have off of your website?
No temperature colors for fuel or timing maps? Or is it all just black and white? How many i/o? Advanced tables or anything like that?
Is that software included in the kit its not whats on the website?
Hey everythings cool. Actually spoke to tim, I'm the guy with a turboed LS lemans. Anyways, I think it be cool if you could have 2 can buses so you wouldn't have to unplug it. If it's possible that be great. Do a trans tuning video soon!
Is this information similar to how the killshot needs to be set?
Update... Updated to lastest software and now this doesnt work
thanks for the information aces killshot is awsome and free tuning software
Thanks! Keep a look out for more videos coming soon.
@@AcesFuelInjection why is the tuning software not downloading to my Chromebook? Do I need a different laptop?
I installed the jackpot efi , it idles for 2 -3 minutes then it boggs out and dies .. then it won’t start unless i give it gas
Do you guys have any hp rating for boosted engines with the tbi systems?
It really depends on how much boost but somewhere around 550 for our killshot system.
Does this system work with trans shifting ?? for like an electronic automatic ??
Yes
I got the jack pot as well idles dies , unless I give it gas , now it won’t fire on half the engine 😮
Sounds like you took the idea of hp tuners & made it adjustable
I wish i could get the whole fuel and ignition system for my big block ford 460.
Go check out our master kits on our website. The Killshot or Royal Flush would be a great solution.
Does it let you run Hp tuners software 🤔
It need too
No hp tuners is for stock ecu
@bobbygreenhaw4790 hp tuner works with all the holley ecu's. It's not just for stock stuff
Just got the killshot system in the mail yesterday.
That is great. Please reach out to us if you have any questions. Tag us in a video or picture so we can see your progress.
@@AcesFuelInjection Will do. Excited to get it put on.
would love to see how you got to this page. At the start your hitting buttons not even showing the screen or explaining how to get to the point your at. No where do you mention anything about the laptop and what program you have on the screen. Pretty disappointed with the support for the 2600 dollar system I bought. I should not have to search RUclips for help to install this system.
Where is your product made?
Same country Holley is made in.
The REAL WORLD PROBLEM is regular people don’t know what all that sh!z means, what does it matter that you “trimmed the fat” off of something nobody wants to look at because the verbiage, idea and everything else is the same.. MOST ALL SOFTWARE IS FREE
Going through it to fast & your skipping over any (unknown) information, meaning you know what you know but we sure as shiz don’t!!
This shit is bull rhis is a bad product it floods my system I haven't customer service no good yeah