03 Suburban Rear Door Speaker Upgrade

Поделиться
HTML-код
  • Опубликовано: 11 дек 2024

Комментарии • 31

  • @AkhDawud
    @AkhDawud 2 года назад

    Dude, you have the only video I've seen on RUclips that fully explains this issue I've been having

  • @doubleya215
    @doubleya215 5 лет назад +3

    Nice video man. Just so you guys watching this are aware there are 2 ohm speakers available to replace the Bose factory ones. You will get more punch from the factory head unit and amp with a 2 ohm speaker. That's what the Bose are running on, 2 ohms.

    • @gmc_4.8_slow95
      @gmc_4.8_slow95 3 года назад

      Don’t think the rear are 2 ohms. I installed 2 ohms for the rear and are much quieter. Think rear are 4 ohms

    • @doubleya215
      @doubleya215 3 года назад

      @@gmc_4.8_slow95 mine were 2 ohms. I installed some 2.7 ohm infinity speakers and it was a drastic improvement.

    • @gmc_4.8_slow95
      @gmc_4.8_slow95 3 года назад

      Heard it was close the 3.6

    • @doubleya215
      @doubleya215 3 года назад

      @@gmc_4.8_slow95 put a multimeter on the speaker leads and test the ohms. Thats what I did. 2 ohms.

    • @doubleya215
      @doubleya215 3 года назад

      @@gmc_4.8_slow95 also if the rear was getting 4 ohms from amp, and you install a 2 ohm speaker replacement it would get louder 9 times out of ten. Ohms law.

  • @zombieapocalypsecherokee9224
    @zombieapocalypsecherokee9224 Год назад

    Great video I was very tempted to do this today but I took the lazy way out and just ordered 5¼ great job fitting them in there I didn't think it was possible but you proved it is 😁👍

  • @jewllake
    @jewllake 6 лет назад +6

    Non bose have a 6.5" speakers front and rear. Bose have the 5.25" speakers in the rear.

    • @mjmcomputers
      @mjmcomputers  6 лет назад +1

      Thanks for the info.

    • @Monsta2592
      @Monsta2592 5 лет назад

      You figure Bose would be 6 1/2 alway round not 5 1/4 back

    • @zombieapocalypsecherokee9224
      @zombieapocalypsecherokee9224 Год назад

      100% lol I found that out the hard way today with my 03 Suburban. I fit 6¾ Rockfords in the front no problem but the backs most certainly are 5¼ so I just returned the other 6¾ I ordered for the back doors and ordered 5¼ Rockfords problem solved hopefully.

  • @TinoGutierrez-h6m
    @TinoGutierrez-h6m 17 дней назад

    Wouldn't need the spacers if you would have gotten the right speaker mounts.

  • @Studio-ve8cd
    @Studio-ve8cd 4 года назад

    Came across this looking for help with my 2007. Gotta ask...what is that song?????

    • @mjmcomputers
      @mjmcomputers  4 года назад

      I don’t recall, it may have been a song from Ross Bugden here on youtube. ruclips.net/channel/UCQKGLOK2FqmVgVwYferltKQ

  • @Monsta2592
    @Monsta2592 5 лет назад

    Awesome you help me a lot just now this is what I’m doing didn’t know if it would work thanks also was it a difference in sound??

  • @anthonyreddy2834
    @anthonyreddy2834 4 года назад

    If you buy spacers from metra of Amazon you don't have to cut the door and don't have to worry about clearance from window!🤷‍♂️

    • @mjmcomputers
      @mjmcomputers  4 года назад

      True but I didn’t have to buy anything extra.

  • @eduardofiscal7812
    @eduardofiscal7812 6 лет назад

    What you do to the oem speakers

    • @mjmcomputers
      @mjmcomputers  6 лет назад

      put them on a shelf in the garage.

  • @Ben-et8wh
    @Ben-et8wh 7 лет назад

    what size were the stock speakers? my 2005 duramax they are only 5" or 5.25" corner bolt to corner bolt. so small :/

    • @mjmcomputers
      @mjmcomputers  7 лет назад

      +BigB If I remember correctly I think these were originally 5.25

  • @mobilemike8500
    @mobilemike8500 6 лет назад

    Just want to let everybody know I'm a 50 year technician all these Chevy wiring diagrams are incorrect the dark green wire is the positive I pulled out my original speakers and popped the speaker to verify dark green wire in the right front door went to the positive ...on the back doors they were 8 ohm speakers the yellow wires were positive GM flips the connector over to the other side of the speaker looking down on it from the back side on the rear speakers... every diagram I have seen shows just like this guy stated but my 2002 Tahoe was all original and that's the way it came apart so either my car is wire completely backwards or GM released the wrong information pretty sure the diagrams incorrect though because even the subwoofer shows the negative lead in the schematic going to the hot lead and the subwoofer is clearly marked and the gray wire is wired in parallel to the tweeters in the front doors and it is clearly going to the positive same with the dark green on the right side and definitely yellow wires to pop the speakers outward on the rear speakers I will verify this by looking at another Chevy sometime in the near future but I doubt mine was the only one wired backwards I believe the schematics that everybody's using are incorrect I also very last verified the polarity to the speakers with my volt meter it is possible you have to keep the volume down and put it on auto and reverse the leads

    • @robadams2274
      @robadams2274 6 лет назад

      Is the dark green wire the positive for the tweeters too? In the process of upgrading my truck now.

    • @mobilemike8500
      @mobilemike8500 6 лет назад

      Rob Adams not exactly sure I've owned Chevy all my life I'm just letting everybody know that my particular truck tested differently I actually bought a phase tester for 10 bucks on eBay I'm going to check all my vehicles I guess that's the best way but I do believe the wiring schematics were written incorrectly and released by Chevrolet either that or they sent out all their speakers in reverse polarity

    • @gmc_4.8_slow95
      @gmc_4.8_slow95 3 года назад

      Bose aren’t 8 ohms?

  • @icemack4897
    @icemack4897 4 года назад

    NEEDS 2 GET HIS WORDING BETTER...LOL THANX FOR SHOWING THE HOW TO WITH THE GMC/CHEVY 2000-06 SPEAKERS DOOR REMOVAL-INSTALL

  • @dunnrite8299
    @dunnrite8299 3 года назад

    All u have to do is cut the bout 1/4 taps off on the surface 🤦🏿‍♂️🤣🤣🤣🤣🤣