I really don’t know why most people don’t give y’all a thumbs up!!! It doesn’t cost them anything and it’s very interesting to me otherwise I would not have subscribed.. Please keep um coming guys.. Thank 😊
That's exactly what it is a nice clean old 5 screw M&P, made some time post 1948 due to "4 line" but earlier than 1955 due to it being a 5 screw frame. Shoot 158 grain lead at around 750 fps, and it will work for another 100 years.
@ 14:10 … that’s a M&P .38 Special (most likely what’s known as a “post-war”) 5 screw S&W with a tapered barrel. It’s a pre-10 I’ve got one just like it. Nice shooters.
That's my little Kel-Tec ks7 in flat dark Earth over on the wall to the right with the big bad tanker muzzle brake and the pop-up sites on the monolithic rail and a nice durable little shoulder strap. Thanks for the great deal.
Take the Chiappa mags and pitch them in the trash, they are jam o matics. Chiappa really mailed it in on the mags knowing that most people will just buy Beretta factory mags for the thing. With Beretta mags it works pretty ok.
Dang! That 605 must’ve gone quickly. Can’t find it on this awesome site. I’m carrying a 605 right now and love them. I wish Taurus would make a 605 toro. Talk about perfecting your DA trigger pull with a dot on top. You can hone in your pull.
R1... As perfect a pistol as you could want... except for the bloody thumb safety!!!! Change that,... Good to go.. with a reliable magazine!!!( Or several good magazines)
That pre model smith is probably a police turn in. It's a k frame but is it 32, 38 smith, or 38 special? If it's 38 spec, almost definitely it's a pre model 10.
I have one with no model # stamped on the gun too. It's a snub nose though. My father carried it when he was off duty. I first remember seeing it in the early 60s. Not exactly sure when he got it.
That is not a model 38, but a pre-model 10, a K-frame M&P in 38 special. S&W Model 38 is a airweight J-Frame 5 shot 38 spl with hump back hammer shroud.
That is a 3 screw model 10. S&W didn't start marking model numbers until after 1957. The model number should be right there as soon as you drop the cylinder. I'd say that gun is early 1960's by the grips and hammer on it. I also could be wrong.
That 4 inch s&w .38 special has the half round front sight, making me believe it is a pre Model 10, Military and Police.
Appreciate that you tested the mags so people didn't assume it was the fault of the gun.
Love the forrest gump quotes.
Thanks guys, always a pleasure to spend a little time with you!
That CZ had my full attention. 😊 And then...the Remington,. Idk nice if priced right.
I really don’t know why most people don’t give y’all a thumbs up!!! It doesn’t cost them anything and it’s very interesting to me otherwise I would not have subscribed.. Please keep um coming guys.. Thank 😊
The four inch Smith looks like a pre-model 10 M&P to me.. good luck with it!
That's exactly what it is a nice clean old 5 screw M&P, made some time post 1948 due to "4 line" but earlier than 1955 due to it being a 5 screw frame. Shoot 158 grain lead at around 750 fps, and it will work for another 100 years.
Enjoy the unboxing videos! Shame on people who send in guns that are dirty!
Mecgar beretta mags are fine. That's a promag beretta magazine.
I always enjoy these unboxing videos, thank you!
They purchase these to sell? (or like a consignment).
Yee haaa! Another magnificent unboxing! You're spoiling us, C and R...😊
@ 14:10 … that’s a M&P .38 Special (most likely what’s known as a “post-war”) 5 screw S&W with a tapered barrel. It’s a pre-10
I’ve got one just like it. Nice shooters.
No gag reel? 😢
Nice collection of stuff thank you
That's my little Kel-Tec ks7 in flat dark Earth over on the wall to the right with the big bad tanker muzzle brake and the pop-up sites on the monolithic rail and a nice durable little shoulder strap. Thanks for the great deal.
Take the Chiappa mags and pitch them in the trash, they are jam o matics. Chiappa really mailed it in on the mags knowing that most people will just buy Beretta factory mags for the thing. With Beretta mags it works pretty ok.
Another great video!!!!
"Stay Strong, Chase Excellence Brothers." - MR
Thanks guys enjoyed the video
Thanks for the reviews
I have a Nickel Colt Cobra just like that one. Maybe I'll pop in tomorrow and see if I want to get a matching gun to make it a set.
Thank You
Dang! That 605 must’ve gone quickly. Can’t find it on this awesome site. I’m carrying a 605 right now and love them. I wish Taurus would make a 605 toro. Talk about perfecting your DA trigger pull with a dot on top. You can hone in your pull.
I'd probably never get sick of cleaning guns, even if I had to clean every one that you guys ever received.
Not a model 38. 38 special is in the model 10 family
Little Rock is in Arkansas, not Mississippi
There are lots of little rocks in Mississippi, mainly in people's heads.
The first one could be a revolver...rifle. 😉
R1... As perfect a pistol as you could want... except for the bloody thumb safety!!!! Change that,... Good to go.. with a reliable magazine!!!( Or several good magazines)
Thanks.
What up with your hair man I'm gonna point you on the side huh pretty funny though because nobody noticed that
That pre model smith is probably a police turn in. It's a k frame but is it 32, 38 smith, or 38 special? If it's 38 spec, almost definitely it's a pre model 10.
That's what I was thinking is a pre model 10 but of he said it feels smaller in the hand I think they were making I frames in 32-20
@@Swishersweetcigarilo I didnt catch that part. Youre after I watched again, he did say it felt smaller. So back to unknown as of yet.
It's a pre model 10 M&P in 38 special, he is probably thinking it is smaller due to the tapered barrel. Post 1948 but pre 1955.
I have one with no model # stamped on the gun too. It's a snub nose though. My father carried it when he was off duty. I first remember seeing it in the early 60s. Not exactly sure when he got it.
I think it's a pre model 10 with the wrong box. Hard to tell without holding it. Did they make I frames in 32-20?
Model 15s had adjustable rear sights
What is a model 38??? Sounds good, but having NEVER heard of such a piece....
That is not a model 38, but a pre-model 10, a K-frame M&P in 38 special. S&W Model 38 is a airweight J-Frame 5 shot 38 spl with hump back hammer shroud.
Did Randy ever wear a flat top back in the day?
Tho a .380 is fine,.. give me a minimum of 9mm...or so.....
🌭
No ghoul wants to get shot, so caliber is not a high factor...
Shoot well, when you must....
What kind of gun owner does not clean their guns.
The owner of dirty guns.
One that buys ss guns.
8:46 I'm weak and compromised, but only in the mental sense.
Just a joke people. Don't take yourselves too seriously.
total fail on the older 5 screw smith and wesson .
Have a mod38
In my hand. You don't. 38 is an air weight j frame with a hump back (hammer shroud)
Yep, it's a K Frame M&P in 38 spl. Post 1948 but pre 1955.
Chris are you seeing a lot of the stimulus check gun buyers selling those guns now due to the economic climate?
That is a 3 screw model 10. S&W didn't start marking model numbers until after 1957. The model number should be right there as soon as you drop the cylinder. I'd say that gun is early 1960's by the grips and hammer on it. I also could be wrong.