New S550 Steering Wheel (2015-2023 Mustang)
HTML-код
- Опубликовано: 24 апр 2024
- We are going over the steps to replace OEM Steering Wheel to a beautiful aftermarket version for a 2021 Mustang GT.
WARNING: Incorrect repair techniques or actions can cause an accidental Supplemental Restraint System (SRS) deployment. Never compromise or depart from these instructions. Failure to precisely follow all instructions could result in serious personal injury from an accidental deployment.
WARNING: Ensure the backup power supply is depleted. Ignition must remain OFF until repair is complete. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment.
1. Intro - 0:01
2. Step 1 (Remove Battery Cover Retaining Clips) - 0:16
3. Step 2 (Remove Battery Cover) - 0:31
4. Step 3 (Disconnect Negative Cable) - 0:37
5. Step 4 (Remove Extended Paddle Shifters) - 1:09
6. Step 5 (Detach Air Bag Module) - 1:35
7. Step 6 (Disconnect Air Bag Module Connectors) - 2:19
8. Step 7 (Disconnect Switch Connector) - 3:04
9. Step 8 (Remove Steering Wheel Bolt) - 3:18
10. Step 9 (Remove Steering Wheel) - 3:41
11. Step 10 (Tape the Clockspring Rotor) - 3:53
12. Step 11 (Remove Right Switch & Bezel Assembly) - 4:19
13. Step 12 (Remove Left Switch & Bezel Assembly) - 4:48
14. Step 13 (Remove Lower Steering Wheel Switches) - 5:16
15. Step 14 (Remove Lower Bezel) - 5:46
16. Step 15 (Remove Paddle Shifters) - 5:53
17. Step 16 (Remove Steering Wheel Trim) - 6:35
18. Step 17 (Remove Backing Plate) - 7:21
========= New Steering Wheel =========
19. Step 18 (Install Backing Plate) - 8:02
20. Step 19 (Install Steering Wheel Trim) - 8:39
21. Step 20 (Install Lower Steering Wheel Switches) - 9:05
22. Step 21 (Install Paddle Shifters) - 9:43
23. Step 22 (Install Lower Bezel) - 10:20
24. Step 23 (Swap Switch & Bezel Assembly) - 10:56
25. Step 24 (Install Right Switch & Bezel Assembly) - 11:58
26. Step 25 (Install Left Switch & Bezel Assembly) - 12:32
27. Step 26 (Torque Retaining Screws) - 12:48
28. Airbag Cover Replacement - 13:04
29. Step 27 (Install Steering Wheel) - 15:27
30. Step 28 (Install Steering Wheel Bolt) - 15:51
31. Step 29 (Torque Steering Wheel Bolt) - 16:12
32. Step 30 (Connect Switch Connector) - 16:22
33. Step 31 (Connect Air Bag Module Connectors) - 16:35
34. Step 32 (Install Air Bag Module) - 16:54
35. Step 33 (Connect Negative Cable) - 17:12
36. Step 34 (Install Battery Cover) - 17:27
37. Step 35 (Install Battery Cover Retaining Clips) - 17:37
38. Step 36 (Turn Ignition ON) - 17:49
39. Step 37 (Test Buttons) - 18:04
40. Show it off - 18:15
Products Used:
This video contains affiliate links for which I may receive compensation.
New Steering Wheel - almaghrabyauto.com/
Threadlocker - amzn.to/3xUsPaU
Torque Wrench - amzn.to/3wqbKCI
Trim Removal Tool Set - amzn.to/35Lry84
Wood Mixing Stick - amzn.to/4decNIT
Tools:
1/4" Socket Wrench
1/2" Socket Wrench
3mm Allen Key
4mm Allen Key
10mm Socket
24mm Socket
Flat Head Screwdriver (Small)
Needle Nose Pliers
Safety Glasses
T20 Torx Bit
Threadlocker
Torque Wrench (44 in-lb)
Torque Wrench (35 ft-lb)
Trim Removal Tool Set
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on RUclips is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on RUclips. Use this information at your own risk.
#steeringwheel #s550mustang - Авто/Мото
Wanted to drop by to say that I finally got around to swapping my brakes to a Brembo kit using your S197 tutorial. Couldn't have been more straightforward. You would have to be an absolute idiot to mess anything up with the mad attention to detail and clarity of your tutorials. Thanks again!
That's AWESOME!!! Greatjob!!!
I believe what you referred to as a "Backing Plate" is used to dampen vibrations in the steering wheel. Nice tutorial overall to help others if they want to do something like this!
Thank you. Very cool to know.
Great video! Where did you get the orange cover and trim pieces for the wheel from?
Came with the steering wheel
Hello - My mustang Mach 1 2023 has a M10 bolt and not 24 mm. Do you think I can remove and use a 24 mm bolt when I swap the steering wheel? I got my custom wheel from beith performance. Appreciate your feedback
The bolt should be an M10 bolt with a 24mm socket head.
Thank You@@mcgurrentertainment- Was able to successfully install it and it looks amazing. Thanks for the video, saved me lot of $$$
great explanation! Where did you get the steering wheel from? the link is expired
It's "Almaghrady Auto Parts." The link is still correct. However, their server is down.