Chevy Tahoe/GMC Yukon Fuel Pump Flex Fuel Replacement How-To

Поделиться
HTML-код
  • Опубликовано: 19 дек 2022
  • This step by step video will show you how to drop the fuel tank and replace the fuel pump assembly on the 2000-2005 Chevy Tahoe/GMC Yukon 2nd generation. The parts listed in this video will be for the flex fuel models. Fuel pump assembly was purchased from Walmart.com but I will provide a link for Amazon as well.
    Delphi Fuel Pump From Walmart.com: goto.walmart.com/c/3756950/56...
    Delphi Fuel Pump From Amazon: amzn.to/3HQVOz8
  • ХоббиХобби

Комментарии • 40

  • @apacheglen8421
    @apacheglen8421 28 дней назад +1

    Really appreciate the detail you provide especially with the plastic grommets and gaskets on the Chevrolet truck series. These plastic pieces and parts cost me more grief than you could possibly imagine you've provided some decent workarounds and insight thank you

  • @davidliu4002
    @davidliu4002 20 дней назад +1

    the best video . Watch 2x looking forward to replace gmc yukon this July 4th weekend. Thanks best video.

  • @gusquintana8661
    @gusquintana8661 Месяц назад +1

    Just want you say thank you! Changed mine out with my friend folling your video!

  • @ethanjordan21
    @ethanjordan21 Год назад +2

    Getting the damn straps lined up putting it back in is the hardest part from the floor. Good video.

  • @carlottacaminos16
    @carlottacaminos16 10 месяцев назад +1

    one of the best video i watch to do my yukon i thank you alot for all the details

  • @u842mjt
    @u842mjt Год назад +3

    Nice job! Very detailed.

  • @michaelkimes4196
    @michaelkimes4196 Год назад +1

    Very helpful without a rack, you saved me.

  • @ccarlley
    @ccarlley 8 месяцев назад +1

    Outstanding video. You really took your time with the camera angle and explained everything thoroughly. And you didn't cuss or throw tools (as I would've). Subscribed!

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  8 месяцев назад

      Thanks for watching. We appreciate your support!

  • @4GuitarTrance
    @4GuitarTrance 11 месяцев назад +1

    Man, that's a heck of a long, somewhat tedious job! Wish I had the knowledge, equipment and space for doing my own repairs. Repair costs, parts and labor, are getting absolutely ridiculous these days.
    Great vid... thanks!

  • @bigosso208
    @bigosso208 Год назад +1

    Great video
    Thanks

  • @eddiebaker533
    @eddiebaker533 8 месяцев назад +1

    Best video. I have to do this tomorrow.

  • @shanebaker2613
    @shanebaker2613 6 месяцев назад +1

    great video/editing! thank you

  • @terryobrien4644
    @terryobrien4644 Год назад +2

    Excellent video! We'll done !

  • @geraldross9430
    @geraldross9430 3 месяца назад +2

    Two cinder blocks one on each side of the vehicle with an 8' 2x4 allows you to easily lower and raise the tank with gas or without! Instead of fighting with the evap lines on the back remove the evap canisters two 13mm bolts and lower the evap canister with the tank!

  • @gmarmaduraexotics
    @gmarmaduraexotics 6 месяцев назад +1

    Great Job, Much covered and camera covered angles.

  • @jimcarson9682
    @jimcarson9682 4 месяца назад +1

    Nice detailed video, did mine a little different as I couldn't get the second fuel line in the front of the tank disconnected(why did they put these connectors where you can't see or really reach them?? and tabs you can't disconnect with your fingers?? 😡) Disconnected the driveshaft for more room, dropped the back of the tank down and was able to disconnect the lines off the pump then popped the lines out from the tank. Dropped the tank all the way out, Installed an ACDelco premium pump(genuine GM replacement) made in China 🙄 Hopefully lasts as long as the original 160k mi. Took 4-6 hrs and could do it again in 3 but may just cut the floor next time if these pumps don't last long.

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  4 месяца назад

      They don’t make it easy that’s for sure. GM pumps have always had issues and don’t last long I’m surprised they never put a hatch in all their vehicles for easier access.

  • @ari1234.
    @ari1234. 2 месяца назад +1

    HOW THE PUMP PERFORMANCE SO FAR? GETTING ONE TOMORROW...MINE IS LEAKING AND LOOSING POWER GOING UPHILL.

  • @papergatorzfedducca7998
    @papergatorzfedducca7998 Месяц назад +1

    I broke one of my evaporator plastic lines? How screwed am I?

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  Месяц назад +1

      You may get a check engine light but it most likely won’t effect the way it runs

    • @papergatorzfedducca7998
      @papergatorzfedducca7998 Месяц назад

      @@BLUECOLLARGARAGE ok thank you bro!!

  • @user-sy7he4md8t
    @user-sy7he4md8t 7 месяцев назад +1

    what's the difference from a gas and flex pumps?

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  7 месяцев назад

      The only difference is on the fuel pump the normal regular gas will have three lines coming off of it where as the flex fuel only has two lines coming off the fuel pump.

  • @Hawk2Kutt
    @Hawk2Kutt Год назад +1

    How much would you charge someone for that work ?

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  Год назад

      Labor I’d say about $150-$250.

    • @thespeedjunkieo2904
      @thespeedjunkieo2904 11 месяцев назад +1

      My mechanic told me 850 to do smh

    • @gmarmaduraexotics
      @gmarmaduraexotics 6 месяцев назад

      that's what the charge fee is. take les then 2 hrs at a shop@@thespeedjunkieo2904

  • @markschwienher8731
    @markschwienher8731 4 месяца назад +1

    Cant you drop the tank down some so you have more room

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  4 месяца назад

      You can just be careful with the evap lines.

  • @buddyrebel_Garcia
    @buddyrebel_Garcia 2 месяца назад +1

    Is that a flex fuel pump?

  • @deez6686
    @deez6686 Год назад +1

    Great video mane

  • @orion000
    @orion000 2 месяца назад +1

    Badass bro. Thank you for the help. How has it been holding up?

    • @BLUECOLLARGARAGE
      @BLUECOLLARGARAGE  2 месяца назад +1

      So far so good this was done on a buddy’s and he’s still driving it everywhere.

    • @orion000
      @orion000 2 месяца назад

      Best gmt800 video on fuel pump replacement. God bless you Sir, take care

  • @LS3D_Printing
    @LS3D_Printing Год назад +1

    Looks like imma have to give this a shot. 🫡 Cars acting up. Appreciate the detailed guide

    • @LS3D_Printing
      @LS3D_Printing Год назад

      Absolutely amazing. Got the car up and running. The hardest part was taking off the clip on the fuel pump and lifting it back into the car. Besides that super easy. Thank you dude.