Just did the dpf delete on my race truck n after it being the first mod I’ve done to it, that alone makes the truck so much more alive and fun to drive
My truck had CCV filter on it. I didn’t delete it but I did replace. My mechanic said it’s probably what started my oil leaks. My truck doesn’t drip but seaps some everywhere 😂. Might look into the delete for that. Also the cp4 disaster kit would be a good idea. I already did all the deletes
My cousin just spent like 11k+ on a cp4 disaster fix at the shop so I figured I’d rather pay 400 +the pump itself if it fails. And I have heard a lot of guys leaks stop after deleting ccv apperantly, luckily mine had never leaked at all
Awesome videos!!...I love your truck!.... What size are your tires they look Good on that truck... And you're lift what size is it?.... Keep those videos coming.. Arthur........
Also super important. swap that upper fuel filter from plastic to a housing with a spin on. Next replace the charge air cooler pipe with a metal one instead of the plastic. Mine has broken and I know two people who had it go. It’s easy insurance
Isn't the title must have mods? Definitely a must have. If your pockets ain't deep enough for that upgrade ya might want to sell the truck and get a prius 😮
Hey, love your videos, I have a question when you put 37's on your truck. Did you have to trim the bumper or the back the well of the tire Or did the lift that you have on the truck helped it with out rubbing on the truck... I have a 2016 F250 stock. Do you think I could fit 37's without lifting it? Or do I have to lift it and modify anything to make those tires not rub.. Thank you keep those videos coming!!!
I got a stock 2017 F250 with 80K miles. What are some deletes and tunes I should make for better mileage? Truck also feels heavy so maybe make it a little faster too
I have the same exact truck with a long bed, the work horse has over 500k miles on it.. knock on wood haven’t done any of this shit. Your a hypebeast. Don’t fix what ain broken champ
@@joshuabittner3658 what are you asking? The truck is still stock. My mechanic actually told me deleting the dpf or anything is more likely to fuck my truck up rather than help in it’s high mileage
I got the H&S my whole dash lit, I ended on the side of the road last month because it shut me down till I unplugged it even that my truck didn’t want to crank until I unhook the negative battery terminals and did a restart im still driving around with the stock tune on. I just can’t have the tuner plug in telling me the EGTs or load or else I’ll be on the side of the road again
Have you heard of adding shims to the egr when the dpf gets removed? I’ve been told by a ford mechanic it’s best to leave everything intact after deleting. Just disconnect and tune
Just FYI after it splits or in my case when it blew off the truck you're stuck. No turbo, no power..truck barely moves. Better to get ahead of the game (especially if you're running a tune w/ increased boost) then have it blow on a road trip like mine did...lol, Lesson learned the hard way.
I looked up if Tx does emission inspection on diesels and it said they are exempt. I might do some more research before I delete any truck I get but hopefully I can.
I have a 2013 lariat ultimate with the same body and color scheme as yours. I have the DEF and EGR delete. I would like some more info on the last modification you talked about. Can you send me a link or 2 explaining it? I would appreciate it if you could.
All deleting the EGR could do as far as Temps is make it a little cooler, when it’s still on it will put hot exhaust into ur intake with it deleted you got strictly cold intake air
@@nick7.398 Actually when running an EGR while it is dirty, its ran through an intercooler before reentering the engine and removing it actually increases the EGT's I just wasnt sure if you had ran into problems. Some people see super high temps when towing.
@@HMuny55intercooler physically cannot cool air to ambient temperature or below. Fresh air is always colder, not to mention that fresh air will end up going through the intercooler aswell.
@@warmpankake962 The combustion temps are lower with the egr circulating into the combustion chamber. Every person ive seen that has deleted their EGR has seen dangerously high EGT's at times.... I thought this was common knowledge but u guess not. It's not about the temp of the air coming into the engine that determines the EGT's its the temps generated at combustion with the air(o2) fuel ratios
@nick7.398 my experience with k&n I put one on a dodge cummins. I cleaned it often as well, but I was finding dust on the inside of the intake tube. They work good on gasoline motors, but diesel with turbo will pull dust into motor. Better off if you can adapt a BHAF filter to it.
When you step back and look un biased. It’s crazy all the money you have to spend to make a truck dependable. Not including the price of truck. The price of mods and deletes and labor prices. It’s so impractical. But I need my F250. And need another one. Damn.
@@nick7.398 I bought my 7.3 many moons ago. For its dependability and longevity. Well that went for all diesels. Now I struggle to see the point of a diesel engine for us consumers. These gas trucks are prolly just as good. And they tow just as much. Who honestly pulls 15k lbs across the US? I’m looking for a used 2016 F250 diesel. If I delete the DPF and EGR and do all the stuff required to throw no codes or engine light etc. make it like a real engine that can drive 145 miles a day. Like my 7.3 does with half million miles. Do I have to re install that stuff every time I need my stickers?
It’s terrible to have motors that need so much work and money to make it more reliable. Possible another brand could be better? I’m not sure but it’s a great looking truck.
2012 f250 deleted and running a minimaxx...im getting 13 pulling 7x 16ft enclosed tool trailer. Without my trailer and staying out of the throttle i can get close to 18
@@nick7.398 haha yeah i feel you i went ahead and upgraded them to sinister diesel and had them powdercoated ruby red to match my truck didn’t want to take a chance of the plastic cracking. But i will say… my god it was a pain in the ass to do the cold side
Ahh come on mate, the CAC pipe is easy to change. My hot side pipe was the pain. Fkn factory boot stuck on the intercooler and getting the clip to come off the the end that was attached to the turbo was a pain.
@@nick7.398 on the hot side pipe we can agree. The CAC pipe is a more common failure point that is worth the $300 investment to replace with a Pusher or other manufacturer replacement. That’s just my opinion and what I did when my truck hit 100k miles.
Don’t buy disaster prevention kits. It’s a $400 waste of money. Fix the real problem: the CP4. Get the upgraded RCD CPX pump ($1000 base price) or even better, the S&S DCR conversion ($2000). No guarantee those DPKs will work and even if they do you’d still have to replace the pump. If you’re in there just do it right.
I want a 6.7 I’d just go ahead and install a S&S DCR pump that replaces the cp4 all together. Other then that just a tune and delete with intake and exhaust is fine for me.
You forgot one important thing with these 6.7 trucks. You need a bank account with 15,000-20,000 bucks in it for emergency repairs. Nothing is cheap to fix on those trucks when it it comes to motor issues. If yet to see any one offer proof that those disaster kits actually work. Everyone I seen post about their CP4 pump failure they ended up having to do injectors, lines and a tank flush or replacement.
First off in your video, you advise eliminating all the federal law enforced requirements. Get caught and you might ask those have been caught what fine they paid. Over 5k is commonly paid in all states ans in Canada. but the fine can be more, much more,. You pay but still must restore the vehicle to legal requirements. That' s if your vehicle isn't impounded, good luck. I'll keep mine so it passes the legal requirement.
just as a reminder when you do these mods, to not post them on youtube or the EPA will come to you with a nice fine. just dont the Goverment that your breaking the law...
Хобби
Texas passed a no longer need inspection bill. Only gasoline vehicles in highly populated cities still need emission test. Diesels are exempt.
Good
@@nick7.398 Takes effect Jan. 1, 2025
Red state
Yes we did, but it doesn’t go into effect until 2025 and in larger areas with emissions testing they will still have to get tested every year.
@@joeymerrell8585Diesels have never required an emissions test in Texas. Safety only.
Die hard Chevyowner, but in another universe that would be my dream truck
Just did the dpf delete on my race truck n after it being the first mod I’ve done to it, that alone makes the truck so much more alive and fun to drive
Wayyy more power lol
My truck had CCV filter on it. I didn’t delete it but I did replace. My mechanic said it’s probably what started my oil leaks. My truck doesn’t drip but seaps some everywhere 😂. Might look into the delete for that. Also the cp4 disaster kit would be a good idea. I already did all the deletes
My cousin just spent like 11k+ on a cp4 disaster fix at the shop so I figured I’d rather pay 400 +the pump itself if it fails. And I have heard a lot of guys leaks stop after deleting ccv apperantly, luckily mine had never leaked at all
Dream truck 😩❤️
You should get a plug kit for all the wiring that was unplugged from the factory exhaust
Not a bad idea
It’s called a shibby kit. Or you could just unplug the harness under the hood.
Awesome videos!!...I love your truck!....
What size are your tires they look Good on that truck... And you're lift what size is it?.... Keep those videos coming..
Arthur........
Thank you, it has a 3” lift on 37x13.50 tires
Got all of those for mine! :) 2015 F350 Platinum
Also super important. swap that upper fuel filter from plastic to a housing with a spin on. Next replace the charge air cooler pipe with a metal one instead of the plastic. Mine has broken and I know two people who had it go. It’s easy insurance
Kinda a waste of money if it ever breaks ill replace but no use fixing if I have 0 issues
Isn't the title must have mods? Definitely a must have. If your pockets ain't deep enough for that upgrade ya might want to sell the truck and get a prius 😮
@@markwalters4643 lol I have plenty of money I just dont waste it the stock one is fine
🤣🤣🤣 okay
Mine blew and it sounded like a 12ga went off under the hood
My dream truck
Thank you it’s mine too
Hey, love your videos, I have a question when you put 37's on your truck. Did you have to trim the bumper or the back the well of the tire Or did the lift that you have on the truck helped it with out rubbing on the truck... I have a 2016 F250 stock. Do you think I could fit 37's without lifting it? Or do I have to lift it and modify anything to make those tires not rub..
Thank you keep those videos coming!!!
Did a 3” lift kit and no I did not cut up the bumper at all definitely will have to cut a-lot if you do not lift it
@@nick7.398 thank you!!!!
Those tires look niiice👌. What are they/what size?
They are 37x13.50 nitto trail grapplers !
I got a stock 2017 F250 with 80K miles. What are some deletes and tunes I should make for better mileage? Truck also feels heavy so maybe make it a little faster too
Ezylink & proven tunes absolutely the best on the market
King ranch seats doing what they do. Got a mod planned for all that rust?
Troller lol. No rust at all on this truck.
I have the same exact truck with a long bed, the work horse has over 500k miles on it.. knock on wood haven’t done any of this shit. Your a hypebeast. Don’t fix what ain broken champ
Emissions too?
@@joshuabittner3658 what are you asking? The truck is still stock. My mechanic actually told me deleting the dpf or anything is more likely to fuck my truck up rather than help in it’s high mileage
Dream truck with a 6.2 in it
Why would you want a 6.2?
Love those tires! Can you tell the tires brand and size? Are those the standard 20 inch rims?
20x8 stock lariat wheels with 37x13.50r20 nitto trail grappler tires
@@nick7.398 thank you
I got the H&S my whole dash lit, I ended on the side of the road last month because it shut me down till I unplugged it even that my truck didn’t want to crank until I unhook the negative battery terminals and did a restart im still driving around with the stock tune on. I just can’t have the tuner plug in telling me the EGTs or load or else I’ll be on the side of the road again
Probably a loose connection somewhere I know a lot of guys with chips on old 7.3s have them get a little loose and it makes it not start
So 420hp and 800ft/lbs torque not enough?
Need to add: No Limits intercooler, 50 gallon fuel tank, air lift bags.
All more of add ons, no need for intercooler if stock is still good, 50 gal is just more heavy and expensive
Have you heard of adding shims to the egr when the dpf gets removed? I’ve been told by a ford mechanic it’s best to leave everything intact after deleting. Just disconnect and tune
Shims? No I havent
Thats what mine has done, been fine so far
Bro, it's 2023, we don't talk about "D3L3ted" trucks and Mini maxes.
Bro like you said it’s 2023, it’s legal to delete your meat but not your truck 😂
He better hope that H&S don’t mess up bc he’ll know all about an ez lynk 😂
@@jorgeayala3695 beat your meat, not your epa compliance
@@jorgeayala3695😂😂
Upgrade your cold side charge pipe before she splits
Ima worry about that after it splits
Just FYI after it splits or in my case when it blew off the truck you're stuck. No turbo, no power..truck barely moves. Better to get ahead of the game (especially if you're running a tune w/ increased boost) then have it blow on a road trip like mine did...lol, Lesson learned the hard way.
When the plastic on mine split, the dealer had several charge pipe kits in stock. Wonder why lol
I got a rubber one, just had to tighten the hose clamps back down after I blew the boot off at about 105mph
Good video. What size lift is that?
3”
Are you going to under coat the truck to prevent it from rusting.
No I’m not a fan of oily undercarriage if it gets rusty I’ll just wire wheel rust back off and POR15 it
Is the Min=Max tuner still the way to go for tuners They aren't surported anymore?
It still works alot of guys like ez lynk but its a waste of money in my opinion being I already have the mini maxx
Where’s that grill w/ the light bar spaces from?
Stock ford grille with rough country light bars, wouldn’t recommend them though they very very rarely want to work always having problems with them
Do you think it’s worth deleting at 210k miles? Or do you think the damage is already done ?
Better late than never for sure
How do you pass emissions with the egr/def delete im looking at getting an f250 soon and i live in texas im just curious on how i could bypass it.
You dont pass inspection if your deleted, im in Michigan we dont do inspections
I looked up if Tx does emission inspection on diesels and it said they are exempt. I might do some more research before I delete any truck I get but hopefully I can.
I have a 2013 lariat ultimate with the same body and color scheme as yours. I have the DEF and EGR delete. I would like some more info on the last modification you talked about. Can you send me a link or 2 explaining it? I would appreciate it if you could.
The cp4 bypass kit? It’s available from s&s diesels website if you search “s&s diesel cp4 bypass kit” on google it will come up
SPE has one as well with an internal catch can...pretty slick
Where are the lights on the grill from
That looks like a single row light bar. Probably from Amazon or eBay.
Hey. If you tune and delete your truck. Will you still pass emissions???
No you will not
What is cost of CP4 to be installed ballpark? Thanks
My cousins went out in his 2017 he paid 11k for full fuel system replacement including labor
What size tires are those?
37x13.50
What tire size and did you need a lift
37x13.50 nitto trail grapplers on a 3” lift
Do you have any rubbing?
Cold side pipe asap
Never doing that
does the egr delete cause any exhaust temp issues?
All deleting the EGR could do as far as Temps is make it a little cooler, when it’s still on it will put hot exhaust into ur intake with it deleted you got strictly cold intake air
@@nick7.398 Actually when running an EGR while it is dirty, its ran through an intercooler before reentering the engine and removing it actually increases the EGT's I just wasnt sure if you had ran into problems. Some people see super high temps when towing.
@@HMuny55 that’s completely insane lol it won’t cool it down as cool as clean fresh air
@@HMuny55intercooler physically cannot cool air to ambient temperature or below. Fresh air is always colder, not to mention that fresh air will end up going through the intercooler aswell.
@@warmpankake962 The combustion temps are lower with the egr circulating into the combustion chamber. Every person ive seen that has deleted their EGR has seen dangerously high EGT's at times.... I thought this was common knowledge but u guess not. It's not about the temp of the air coming into the engine that determines the EGT's its the temps generated at combustion with the air(o2) fuel ratios
Defeat all emissions. Straight pipe. Upgrade air filter, no k&n and you're good to go.
Why no k&n same thing it’s a air filter I have a s&b on mine I think it’s a waste of money and does no more good than stock
@nick7.398 my experience with k&n I put one on a dodge cummins. I cleaned it often as well, but I was finding dust on the inside of the intake tube. They work good on gasoline motors, but diesel with turbo will pull dust into motor. Better off if you can adapt a BHAF filter to it.
When you step back and look un biased. It’s crazy all the money you have to spend to make a truck dependable. Not including the price of truck. The price of mods and deletes and labor prices. It’s so impractical. But I need my F250. And need another one. Damn.
Yes trucks and cars are extremely expensive
@@nick7.398 I bought my 7.3 many moons ago. For its dependability and longevity. Well that went for all diesels. Now I struggle to see the point of a diesel engine for us consumers. These gas trucks are prolly just as good. And they tow just as much. Who honestly pulls 15k lbs across the US? I’m looking for a used 2016 F250 diesel. If I delete the DPF and EGR and do all the stuff required to throw no codes or engine light etc. make it like a real engine that can drive 145 miles a day. Like my 7.3 does with half million miles. Do I have to re install that stuff every time I need my stickers?
@@nick7.398 not the aluminum duty. I hear a tire blow out rip the entire body off the truck, slight exaggeration but get my point
@@joshuajuarez3471 wym tho alumiduty even more expensive
Getting rid of all your emissions controls will really upset the Commies at the EPA…🤷🏻♂️
Good thing idc about them
Can i remove the def in my f350 in California tho??
**egr delete i mean
Probably not, you would have to reinstall when u get it inspected, michigan where im at has 0 inspections
It’s terrible to have motors that need so much work and money to make it more reliable. Possible another brand could be better? I’m not sure but it’s a great looking truck.
Beleive it or not this is very minimal work and money most engines have it way worse any brand any year gas or diesel
What kind of gas mileage do you get now?
13.7
2012 f250 deleted and running a minimaxx...im getting 13 pulling 7x 16ft enclosed tool trailer. Without my trailer and staying out of the throttle i can get close to 18
@@spcgardner1208 highly highly doubt that your also not on 37s too
No, im on 35's. But the mpgs are no bs.
13.7 on the hwy? No trailer?
Charge pipes next
When I have an issue I’ll do them😂 spent a sickening amount of money in the last 3 months
@@nick7.398 haha yeah i feel you i went ahead and upgraded them to sinister diesel and had them powdercoated ruby red to match my truck didn’t want to take a chance of the plastic cracking. But i will say… my god it was a pain in the ass to do the cold side
Ahh come on mate, the CAC pipe is easy to change. My hot side pipe was the pain. Fkn factory boot stuck on the intercooler and getting the clip to come off the the end that was attached to the turbo was a pain.
@@christiandavis3910 might as well wait till it’s a problem before I deal with headache and blowing money on nothing…
@@nick7.398 on the hot side pipe we can agree. The CAC pipe is a more common failure point that is worth the $300 investment to replace with a Pusher or other manufacturer replacement. That’s just my opinion and what I did when my truck hit 100k miles.
Where did you get your mirrors ?
They are factory
Don’t buy disaster prevention kits. It’s a $400 waste of money. Fix the real problem: the CP4. Get the upgraded RCD CPX pump ($1000 base price) or even better, the S&S DCR conversion ($2000). No guarantee those DPKs will work and even if they do you’d still have to replace the pump. If you’re in there just do it right.
At the time that dumb pump wasn’t even out I’m sure the kit will work these usually only go out at like 300k lol
✅️✅️✅️👌
Those 20's?
Yes
@Nick’s Powerstroke would they clear on a level kit with the 37s ??
@@josevillalvazo6946 problably mines only a 3” lift
I want a 6.7 I’d just go ahead and install a S&S DCR pump that replaces the cp4 all together. Other then that just a tune and delete with intake and exhaust is fine for me.
DCR pump costs thousands, the filter is $400. Also DCR reduces power so thats why I chose not to do that
How to bulletproof a 6.7, buy a Duramax😂
Lol I dont want any GM vehicle
You forgot one important thing with these 6.7 trucks.
You need a bank account with 15,000-20,000 bucks in it for emergency repairs. Nothing is cheap to fix on those trucks when it it comes to motor issues. If yet to see any one offer proof that those disaster kits actually work. Everyone I seen post about their CP4 pump failure they ended up having to do injectors, lines and a tank flush or replacement.
Ive never seen anyone spend 15,000 on repairs on these ever and I’ve never seen anyone have a disaster kit not work
First off in your video, you advise eliminating all the federal law enforced requirements. Get caught and you might ask those have been caught what fine they paid. Over 5k is commonly paid in all states ans in Canada. but the fine can be more, much more,. You pay but still must restore the vehicle to legal requirements. That' s if your vehicle isn't impounded, good luck. I'll keep mine so it passes the legal requirement.
Lol 5k is way cheaper than destroying your 25k engine 💀 I dont live in california ill be fine every one where im at is deleted and tuned
Ghey
just as a reminder when you do these mods, to not post them on youtube or the EPA will come to you with a nice fine. just dont the Goverment that your breaking the law...
I do not live in California
@@nick7.398epa is federal.
I am not against any of what said, however what state do you live in? You are saying you have no smog restrictions? Please explain.
Michigan !
Florida. There are many places in the United States that are still actually free !
Rusted as fuk. U from the East coast?
Nice troll. Trucks rust free
@@nick7.398 we can see the rust bro.
@@mikewest712 where is there rust?
Running 35s?
37s!
@@nick7.398 are you just on a leveling kit?
@@KR_Cicero 3” lift