Это видео недоступно.
Сожалеем об этом.
Simple POV Display using APA102 RGB LED STRIP and Arduino NANO
HTML-код
- Опубликовано: 16 мар 2020
- This is a Simple POV Display using APA102 RGB LED STRIP and Arduino NANO
Materials needed:
APA102 RGB LED STRIP
Arduino NANO
Hall Sensor
3.7V Battery
ON OFF Switch
PCB
8mm x 3mm thickness neodymium magnet
DC Motor
You can download Arduino code on the following link.
www.hobbyproje...
Kits & Components Link
amzn.to/3pJzHiY
Water Level Monitor using NodeMCU
• Water Level Monitor us...
Experiment with NodeMCU ESP8266: Door Status Monitor
• Experiment with NodeMC...
LIKE | SHARE | SUBSCRIBE FOR MORE VIDEOS LIKE THIS.
Thanks for watching.
If you wanted to make a propeller clock with an LED strip of, say, 32 LEDs, you would need to send colour information to 32 LEDs, 60 times per rotation. If you were rotating it at 900 RPM (15 RPS, or 1 rotation every 66.7 mS), giving 1.111 mS per minute-dot position. You would need to service 32 LEDs once every 1.111 mS, or 1 LED every 34.7 uS. Assuming that the LED strip needs 24 bits per LED, we have to send 691 kb/sec down the LED strip, or if the LED strip requires 48 bits per LED, we need to send 921.6 kb/sec to the strip - almost 1 mb/S.
I think I got that all right, but please check me.
Given that the chip has to do more than one instruction for each LED, do you think that the Nano would be able to handle that?I note that your "RGB display is at a very slow rotatrion rate, and the final Day-of-week, time disp[lay is a static photo.
Wowwwww
Can you modify as programmable led strip for water level
is it possible to use the arduinos mini use for the power and hook a power switch into the mix?
Can i make clock but , used led ws2812 ?
Well, how does changing shape works?
Culd it be done with bluetooth integrated hc_05 ?
I wuld love to see hows its going 😁😁
Is it possible to use with WS2812? But this strip has 3 connecting pins!
Thanks!
But why don't they be used strips 3pin WS2812?
Speed is why
can a link with the motor? and how you centered the lever
very cool, awesome video, @arduinomaquinas thank you bro and subscribed
Will this work with attiny85 ?
Bisa reques ga. Membuat Vu meter pake ardino
Sir how many leds we add only 16 or more
Just now i bought all the required components from your old video... 😭😭😭 Now you uploaded this new video using led Strip...😅
Nice project! Your links to the code go nowhere. I would really like to try this and study the code.can you help me?
cool!
Can I use ws2812b led strip?
No
Спасибо
I have compilation error in your all codes. Kindly send me compiles codes plz
,👍🏻
up