We show you what the truck is built to do, ( Vlog # 75 )
HTML-код
- Опубликовано: 4 окт 2017
- We show you what this truck was setup to do and try out our new software, didn't do anything fancy except import our intro and ending using www.movavi.com
Авто/Мото
This is the best trucking channel on RUclips by far. No drama, no e-begging just truck'n. Thank you Sir.
FL8ME Logistics Thank you
there are few russian truckers on RUclips that making nice videos as wel
totally agree, man knows how to run his business. not depend on YT viewers to buy his new truck! think you know who i am talking about. (S.D.). tc
Pet 389 + road + Farm landscape = really dream
*TRUCKS* : *SOMETHING TO BELIEVE IN* ❤❤
That Truck is what I would call Big Iron for sure !
I was thinking more like 3.08 out there in the 75/80 zones , peak Tq on the new X is at 1150rpm with the 2050 lb-ft software.
What a sweet ride she's made to run in the wind and looking good!
Always enjoy your videos.
Thank you again and again for what you do (i learn two new thing ::: the zipper and the fog line )
I love your truck setup, hope to have one like yours one day.
Had to smile when you said “we don’t care,we don’t bloody care” which is a typical British saying 😀😀
Anyway love the videos and your conversation while you truck along. I had some great experiences driving American trucks in Iraq and for me was a great introduction in comparing US and European trucks (I’m an Englishman) and must say I enjoyed driving the up armoured International and Freightliner also the military M915 tractor truck (AM General). It didn’t take me long to get used to driving with the steering wheel on the wrong side 😁😁
Thanks again and safe trucking Sir from England 🤘🏻✌🏻🤙🏻
Thank you for all u do keep these videos coming !!!!
I really like watching your vids! I'm not a trucker but have always liked trucks since I was a kid. Love all the gauges(especially the ones on the screen they are pretty modern looking) really lets you keep tabs on everything. Really informative.
That is one sweet Pete. Drove for 20 years, but sadly never have the opportunity to drive a Pete.
Great video and conversation on the set up of your beautiful machine. As for my self being from the east.. The 75 mph is faster than I would cruise, and makes a huge difference on the fuel milage...especially with my C-15 600 hp . Additionally you are right on with those FED EX doubles.. the second trailer also seems to get sucked closer to my Motorcoach than I feel comfortable with. Safe travels sir
355's with a double over 18. would of been nice the last hole against the dash . If I remember it drops the Rom 250 just like the old brownies. Gives you the going home gear .motor safe Love your videos
On the gearing, change out the rear tire size. You should be able to get it close to 3.55 by just changing dia of the tires. Used to run that stretch about every week. Unless it was bad weather in the winter time. Then we ran I-40 to Kingman and headed north there to OR.
Life is good that is awesome boy that engine pulls that fine truck down the road. 75 miles per hour she sounds like she's just loping along not under any strain whatsoever. Peterbilt Steve looks like he knows how to put them together and spec them right. Watch out for the FedEx trucks riding the white line next to your door. Great video I'll talk to you later.
Raymond Bradley So...these trucks should easily hit 90mph going light
load & on plains...right
This truck is beautiful
My uncle's Peterbilt 357 with an ISX15 has a bit of a stutter or rattle in the higher RPM's as well. I figured maybe it was an exhaust leak or a sticking injector as it has 320,000 miles on it, but maybe it's a more common problem than I thought.
Great clip. Just thinking about the vibration. If it's only happening under load, it may be an idea to check the nut on the gearbox yolk. These have a tendency to come a little loose and one of the things that happen is you may get some flickering of the speedo needle and a slight vibration. I'd also be checking around the center bearing and all universal joints. Hopefully it will only be something little but I know how frustrating and annoying a vibration can be.
Travel safe and I look forward to your next clip.
Cheers,
Dan
Fullnoise I adjusted the clutch and gave it some free play, greased it, fixed the noise but the vibration is still there.
Super nice truck.
I used to love running I-40. Set the cruise at 76 and just ride!
bunker108 this was 80, so it was even better, wide open range with no traffic.
Life is Good. I'm familiar with that stretch of road too. But always preferred 40 to 10, 70 or 80!
Fuel consumption, WHO CARES! My thoughts exactly lol! Very nice truck young man!☺
Now they care,lol.
9K subscribers? Right on!
Is GA your home? I just found your channel. Sweet truck. I love that peterbuilt look. So unique compared to all the aeronose trucks
15 and 75. Nice.
You should put that wood steering wheel will make the tracks look more beautiful
Nice truck
You should do what Capt Tim thinks you should do. Nice work Tim, I really appreciate your videos! I’m going to see Peterbilt Steve October 18th!
Three Swords tell I sent you! I'll buy dinner 😎
Life is Good. Been talking to him for a good year now, but we will be talking about you!
Three Swords that could be scary
You always Experience Grinding Noises & Vibration with 2050 Trq
Same thing i experienced with my isx 550 with 2050
Now i ordered new pete with X15 605 Hp & 2050 Trq but i ordered 1 extra Bearing on Drive Shaft . Maybe it will reduce some vibration 🤞
Very nice truck. That new Cummins is a beast! Loved it when ya pasted the little cummins. What where ya weighing? Nice video too
if a vibration is there have them check your carrier bearings.
Hi Buddy, Not sure if you use your CB much? What is your handle? I noticed mike cable seems to be extra long as you have it wrapped in a few loops. Is there a reason they went with an armored cable rather than maybe a shorter coiled pigtail?
You were almost approaching Bull Hauler speed.
How good is your set up of 3.36 paired with the 18 speed on hill.?
Say did you get those scratches tacking care of ?? Mr..
U joint or Pinion bearing? even new It can happen.
She sounds strong
vibrations are sometimes hard to find
SUCKIN GAS AND HAULIN ASS!!!
Look into the vibrations frequency and that could get you lookin in the right direction of the problem
I don't know why but I feel like driving a auto pete would be much fun too drive
bikramjit singh they are jerky
It could be valve gear ticking away as it leans out all thow that was the bosses idear of getting a 580 v8 scania to be a 700 buy having it computer boost modifyed Bad idear. broken rocker arm later!. Like ya said you will know when it breaks as it sounds like some ones thrown a rock in a concrete mixer..
Had a cumins ISX 512 that would bang away under full load never had a problem with it.
Cold'nt really hear what the noise sounded like from he video. what do other ppl think?
Matthew Fetherston having a shop look at it Monday, they are thinking ride height, I think transmission or drive shaft issues, could be a simple ride height issue, we will see, thank you for your input and for watching.
Good one.
👍🏾👍🏾👍🏾👍🏾
One mile an hour over the speed limit that is ballsy that is reus the Cruzan
Why would you prefer the 3.55s over 3.36s? Seems she's in her "Sweet spot" @ 76 M.P.H.
Sam O I don’t run 76mph my cruise speed is 67 mph and I’m on the east coast, can’t run 76 mph over here, traffic and speed limits dictate what you can do. And you live in a 55 mph state so 336 is a little tall I think 🤔
for perspective in Canada at 63,500, 140,000lbs 3:90 and 4:10 is not uncommon
Sorry you may have said but I don't hear. What's the wheel base on your pretty rooster cruiser. I'm a big fan of Steve's videos and know most of his are 280-300 inch wheelbases.
david hilden jr I think in a previous vid. He said 280
290
have you ever tried the waze GPS app? tells where police are hazards traffic ad so on
Renegade Rancor I did once, I don't play with the phone much while driving, unless it's voice activated headset, so it didn't do me much good.
I am not telling you what to do brother, but when my.last Cummins would stutter like that I would need to.drain.the fuel water separater and she would stop that, might also check the ujoints, you know as i.do anything man made will break 2 miles down.the road or 200,000 miles down the road, be safe and I hope to in.march have my new Pete from Steve and going to.hope to.put it on with landstar reefer side
Jack Caldwell no reefer freight at Landstar, well not much that I know of, and yes we do have a fuel problem at the moment, hopefully things work out well for you in your purchase and leasing on to Landstar, best move I ever made!
Life is Good. I didn't know if they had it still or not, I check several years ago and knew they had good rates back then, I live down in Dalton GA , so I shouldn't have too many issues getting carpet out from there going places , I know they have a better tract record of getting out of hard places , I am like you I can go out make money , no wife and younguns to.worry with, I also want to thank you for sharing your experiences with.your new truck and what to expect and what not to, only question I do have is this, would you.had got the 605hp motor or would you have stayed with.the 565? I am going with the disc brakes on my trailer after you.told me you wished your trailer had them too
Jack Caldwell Hp doesn't matter that much, 4K for 40 hp is nuts! 2050 torque is where it's at!
I'm up the road from you, don't see any carpet loads out of Dalton, it must be cheap freight, but there is a ton of $3 freight in your area, this area is always booming, you make the jump and I promise you will be happy.
Lucifer Ratzinger I pull a dry van not a reefer
This video makes me hate the fact that I run Regional in the Northeast now. I miss the wide open roads out west.
Nicholas Smith just watch the videos, wrong time of year to go west at the moment.
little surprised, you hit that little upgrade at 75 mph and still lost 300 rpm and some speed, I guess 2050 torque is the new 1650, as far as Cummins is concerned, you might be right, 3.36 too high for that motor
Put a swan on the hood
What did that vibration end up being buddy?
Clutch needs two inches of free play and there’s a fitting on the throw out bearing tube that isn’t hooked up to the automatic lube
Do you have a CB radio? If not, why?
TruckerErik2009 I have 6, lots of radios 📻
#leftlanegang
this reminds me of GTA in first person
hellhound Rodriguez I only work in 3rd person mode
Life is Good. Do you ever use your jake brake?
Cameron Nalley it’s always on, so yes if the fuel pedal isn’t applying Fuel the Jake brake is on
Life is Good. Oh alright buddy.
you must be empty, that truck loaded wouldnt accelerate like that loaded.
Ни чего не понимаю! Но почемуто нравится..)
Why would U post yourself breakin the law. Seriously. If something horrible happens in the future this will be out there. This could be used against you in court. They will be able to prove you speed and they would run you threw the mill. Shit happens. You could be involved in a fatal accident because some idiot pulled out in front of you. Don't give anyone amo against you. I know what i'm talkin about. You don't want to get sued. It could put you out of biz or worse. Love your truck and you make good vid's but I will never understand why people post their lives on the net. It's as stupid as a teenager posting naked pic's. It never goes away.
jimbeau please note the posted speed limit, I never exceeded it, guys like you are the problem, you make assumptions without watching and listening to the video.
Im not bashin bud. I come from law enforcement. I know how thing's work. Just be smart. You are havin fun. I get it. The fact is your exsposing yourself to much. Think about it.