I have a 1982 Craftsman FF24 with 6 bolts on my hub, my wheel is 26x12x12, that is cool how you made that one sleaves go into the other one and then you can bolt the ends or make some kind of pin to hold both wheels together, thanks for this video.
So is the piece that bolts to the axle side flat faced on the mating side or backcut? Or in the axle flange on the trans flat faced? Does you tractor wheel hub have a hub centric to center the wheel?
It could be a couple of things. It has been a while sence I have messed with the mower decks, But there are 2 brackets that hang down from tbe lift that attach to the top of deck. Make sure they are adjusted the same. I would also check the muel drive. The muel drive is the assembly that the deck mounts to that mounts to the tractor. Make sure the front arms of the deck ate both in the muel drive. Make sure the mount lock on front is locked and the bracket is secure in both front bolts. Hope this helps. It is tough to exsplain without pictures.
Thank You so much for making this Video! I am beginning a new project soon😊
Your welcome. Glad to help.
I have a 1982 Craftsman FF24 with 6 bolts on my hub, my wheel is 26x12x12, that is cool how you made that one sleaves go into the other one and then you can bolt the ends or make some kind of pin to hold both wheels together, thanks for this video.
Great information, Thank you,
So is the piece that bolts to the axle side flat faced on the mating side or backcut? Or in the axle flange on the trans flat faced? Does you tractor wheel hub have a hub centric to center the wheel?
So you think that would work on a Kubota BX 23s?
@@stoweman34 Depending on what you are doing. If you built them heavier it may work. I think these tubes would be a bit thin.
Can you still buy them?
@@TylerRasmussen-v6m These were made by a collector. You can find duel wheel hubs for sale that people make.
I've recently bought a 1450 with a 50in deck when I try to lift it, it cocks sideways and I was wondering if you had any ideas on how to fix it
It could be a couple of things. It has been a while sence I have messed with the mower decks, But there are 2 brackets that hang down from tbe lift that attach to the top of deck. Make sure they are adjusted the same. I would also check the muel drive. The muel drive is the assembly that the deck mounts to that mounts to the tractor. Make sure the front arms of the deck ate both in the muel drive. Make sure the mount lock on front is locked and the bracket is secure in both front bolts. Hope this helps. It is tough to exsplain without pictures.
@steiger 256 Thanks, I'll look into those.
Don't feel bad I have the same problem on my Alice chalmer
Need your opinion on putting duels on my tractor
What tractor and size of tires are you thinking?
@steiger256 when financing let's me want to do duels on the johndeer
Do you use a snow plow
I have one for it, But I have not used it in years.
@@steiger256 yeah I am a snow plow for