Thank you. I don’t know how I haven’t come across this video but I’ve been having this issue for like a year. Been researching and buying sensors. But behold it was exactly what you found I had three wire worn through. Taped them up and everything is fixed.
It could also be partly worn motor mounts that is causing the motor to torque upwards. The truck does have a ton of miles on it so they’re probably due for replacement.
I have a question on a electric trailer brake system 2013 F350 how does the tbc know if it’s a single ( two brake ) or double (4 brake ) trailer connected If I remove the magnets on one axle a message comes up trailer disconnected I’m curious how the truck knows if it’s a double or single axle trailer connected
I have a high delta on #8 and a misfire after reman injectors. So I swapped it with my old injector, and now I have a high delta and misfire on #3, but not number #8. Any ideas? Changes the injector cups because of fuel in the coolant reservoir. Replaced the injectors as preventative maintenance thing, nothing but trouble since.
Congratulations!! that one deserves a "That a boyha" got to love a chaffy wire find.. A real who done it? They Also draped the wiring over the top of the top of the shock on the drivers side... cause a dead pedal in the Rain...oh yeah find that one in the dark in a rage!
The owner is lucky that could have cought fire would be my first thought be sides lack of power my 99 doge ram wheel chair van 1500 just had a water pump replaced 900 bucks from the dealership but it's fixed running good 64 thousand miles on it now 55 when I got it new tires and battery in 20 20 got it in 20 16
Swear to Christ!......Really wish I would've found your video before I ripped apart all the loom on the engine and replaced the icp sensor also. Thank you. Any idea why my scanner will not pull up my vin on 2003 350 7.3 ?
Always a good day when Daniel Jaeger Films uploads.
Short, concise, no filler, no bs. Its a shame the algorithm favors watchtime.
Thank you. I don’t know how I haven’t come across this video but I’ve been having this issue for like a year. Been researching and buying sensors. But behold it was exactly what you found I had three wire worn through. Taped them up and everything is fixed.
Amazing troubleshooting!! I have the same problem. Going to protect that harness ASAP!
So thankful for guys like you. Thanks for sharing.
this one was very good diagnostic and explanation.
You are the King of diagnostics. 🤴
I hope you never stop uploading
good video my 2002 started doing the same thing a few days ago , same p1280 code will check hardness
It could also be partly worn motor mounts that is causing the motor to torque upwards. The truck does have a ton of miles on it so they’re probably due for replacement.
Thank you for sharing your findings.
I have a question on a electric trailer brake system 2013 F350 how does the tbc know if it’s a single ( two brake ) or double (4 brake ) trailer connected
If I remove the magnets on one axle a message comes up trailer disconnected I’m curious how the truck knows if it’s a double or single axle trailer connected
I have a high delta on #8 and a misfire after reman injectors. So I swapped it with my old injector, and now I have a high delta and misfire on #3, but not number #8. Any ideas?
Changes the injector cups because of fuel in the coolant reservoir. Replaced the injectors as preventative maintenance thing, nothing but trouble since.
Congratulations!! that one deserves a "That a boyha" got to love a chaffy wire find.. A real who done it? They Also draped the wiring over the top of the top of the shock on the drivers side... cause a dead pedal in the Rain...oh yeah find that one in the dark in a rage!
When are we gonna see more tandem axle videos?
Did it help with getting hot under load
which symptoms did you have
Do the 2002 trucks have the same odometer rollover problem as OBS trucks? eg: that truck is about to be at 300k miles again 😉
No
Where are you located?
That's the problem I have with my 1996 f250 with 7.3. My harness route's differently
Awesome stuff here
I'm a fan
The owner is lucky that could have cought fire would be my first thought be sides lack of power my 99 doge ram wheel chair van 1500 just had a water pump replaced 900 bucks from the dealership but it's fixed running good 64 thousand miles on it now 55 when I got it new tires and battery in 20 20 got it in 20 16
Good find
Ford life. Ffs thank you for this video
399xxx miles ...nice 👊
are you kidding me? im gonna take a look to the one im trying to fix, i have the p1280 and p1210 and before it was 1280 and 1211.
Swear to Christ!......Really wish I would've found your video before I ripped apart all the loom on the engine and replaced the icp sensor also. Thank you. Any idea why my scanner will not pull up my vin on 2003 350 7.3 ?