Thank you for reaching out, you are correct it has been awhile since we did this project, the timing varies on the level of finish you want from the machine vs after the fact, this was nearly completed 100% on the machine so we used a very small step over which increased the time. If memory is correct it was 3 hours of machine time.
I'm trying to get a the rotary system mounted to the machine. How should I accomplish this while keeping it square to the machine? The aluminum plates don't line up with any of the tracks.
I have been wondering, which version of the RhinoCam plugin are you using, or would suggest? Great video!
We would recommend speaking with Visual Mill to discuss what CAM program will be necessary for your level of need.
Nice job. I know that this video was posted awhile back but can you tell us how long the machine took to complete the leg that Router Bob is holding?
Thank you for reaching out, you are correct it has been awhile since we did this project, the timing varies on the level of finish you want from the machine vs after the fact, this was nearly completed 100% on the machine so we used a very small step over which increased the time. If memory is correct it was 3 hours of machine time.
I'm trying to get a the rotary system mounted to the machine. How should I accomplish this while keeping it square to the machine? The aluminum plates don't line up with any of the tracks.
Please reach out to our tech support team and they will be happy to assist you. 952-461-4570 and ask to speak with a tech
@@shopsabre I did and was told "however you want to" wasn't the most helpful answer.
That is quiet surprising to hear and unusual, give our tech support manager a call and they will investigate this situation and help