such a well produced, high quality video. thank you for making it. shame that this isnt a common enough problem for it to get a ton of views but it sure helped me!
Awesome vid!! I did replace my seals in '22 (2005 Avalanche z71). That tight space under the steering wheel was a pain in the back literally! I got my seal from a heavy equipment fabrication shop and compared the Amazon product that I also got. Big difference in strength and sturdiness so it was a easy choice which one I picked but a bit challenging for a DIY'er. By far the most satisfying task I have done with my truck projects and I'm pretty confident that seal ain't leaking for a very long time. Now to figure out why my 10amp AC comp fuse keeps shorting out...
there easy to find. just type in - 2005 Yukon hydro brake booster repair kit - who ever you order from contact them and ask if it will work on your vehicle.
Dziękuję bardzo! Mam nadzieję, że uda Ci się zasubskrybować. Staram się nagrywać filmik raz w tygodniu. Ale właśnie przeprowadziłam się na wschodnie wybrzeże, więc wciąż próbuję się rozpakować. Jeszcze raz dziękuję za zatrzymanie się. Nie mogę się doczekać, aby usłyszeć od Ciebie ponownie. Freddie USA
Do you remember what the part number was that you ordered for the hydro booster repair, I order a kit but my metal star looking retainer is smaller that the original it had.
Impressionnant! Je suis content que vous ayez économisé de l'argent, j'étais dans le même bateau. quand le mien est tombé en panne, ils ont dit que ça allait coûter 1 500 dollars pour le réparer. puis j'ai découvert que la pièce coûtait environ 500 dollars pour la remplacer si je la faisais moi-même. puis j'ai découvert que vous pouvez le reconstruire vous-même pour 30 dollars. Heureux d'avoir pu aider. Je déménage sur la côte est, je serai en plein essor en octobre. Au fait j'étais à Paris en 9/2021. Belle ville. J'espère y retourner bientôt. J'ai fait quelques vidéos du voyage.
I replaced the hydraulic booster on my 2002 cadillac escalade. I bled the hoses to make sure their was no air but the brake pedal is still loose. What could be the problem? Please help!!
Have you ever had issues with the vacuum pump. I’m assuming mine doesn’t work for my hydro booster. Does not turn on at all. Ran power to it and the vacuum pump worked. Would you know if there is a relay or fuse for this?
Getting 03 escalade going after 3 years. Power steering very hard to turn and brakes are poor and go to the floor but still provide 30% braking. Is it the hydroboost. Im not sure but power steering pump seems good. But the booster doesn't seem to leak. Brake pettal stiff when suv is off.
Fill your power steering with power steering fluid. Have someone start the car, and have them turn the steering wheel left to right. while there doing that, look at all the hoses that go from your power steering pump to the booster. If there is no leaks. then look under the booster ( see 2:39 ) see if its leaking there. Also make sure the belt tension to your power steering pump is good. good Luck.
There have been some guys that say that it can to be done. but I have never done it that way. Good Luck. When you have it done your going to save a lot of money.
Is there some bracket or spacer between the master cylinder and booster? So im having an issue where my breaks automatically apply pressure slowly after about 10mins of driving they lock up. Someone said that missing spacer or bracket could be the culprit. Do u have any clue to wat may cause that issue?
such a well produced, high quality video. thank you for making it. shame that this isnt a common enough problem for it to get a ton of views but it sure helped me!
well i knew it would save most people money as it did for me. thanks for subscribing.
This is a great video. It was super informative and very helpful. I followed every step of the way and it worked!!!!! Thank you thank you. 🎉
Thank you very much for your input!
This was one of the best videos that I seen very very good thank you so much.
your very welcome!!
Awesome vid!! I did replace my seals in '22 (2005 Avalanche z71). That tight space under the steering wheel was a pain in the back literally! I got my seal from a heavy equipment fabrication shop and compared the Amazon product that I also got. Big difference in strength and sturdiness so it was a easy choice which one I picked but a bit challenging for a DIY'er. By far the most satisfying task I have done with my truck projects and I'm pretty confident that seal ain't leaking for a very long time. Now to figure out why my 10amp AC comp fuse keeps shorting out...
good job! yes tell us what you find out about your AC !
Thank you so much this video just helped me replace my hydro booster. VERY HELPFUL VIDEO
Great to hear!
Great video Production value is off the chart no shaky camera or finger over the lens
Do have a link for the seal kit?
there easy to find. just type in - 2005 Yukon hydro brake booster repair kit - who ever you order from contact them and ask if it will work on your vehicle.
Pozdrowienia z Polski ;) Twoje filmy to super pomoc.
Dziękuję bardzo! Mam nadzieję, że uda Ci się zasubskrybować. Staram się nagrywać filmik raz w tygodniu. Ale właśnie przeprowadziłam się na wschodnie wybrzeże, więc wciąż próbuję się rozpakować. Jeszcze raz dziękuję za zatrzymanie się. Nie mogę się doczekać, aby usłyszeć od Ciebie ponownie. Freddie USA
Thank you you are too professional
Super presentation nice and intelligent man thank you
Wow ! Thank you very much!
Do you remember what the part number was that you ordered for the hydro booster repair, I order a kit but my metal star looking retainer is smaller that the original it had.
There was a little yellow plastic piece that fell out of my booster when I separated it. Where does it go it was just laying in there.
Not sure.. the only piece that could be plastic is at the end of the spring. See 14:40 .. Mine is white. Good luck
Voir que le kit de réparation existe juste apres avoir commandé un hydro booster complet des usa vers la france 😭 30€ vs 300€... merci pour ta vidéo 😉
Impressionnant! Je suis content que vous ayez économisé de l'argent, j'étais dans le même bateau. quand le mien est tombé en panne, ils ont dit que ça allait coûter 1 500 dollars pour le réparer. puis j'ai découvert que la pièce coûtait environ 500 dollars pour la remplacer si je la faisais moi-même. puis j'ai découvert que vous pouvez le reconstruire vous-même pour 30 dollars. Heureux d'avoir pu aider. Je déménage sur la côte est, je serai en plein essor en octobre. Au fait j'étais à Paris en 9/2021. Belle ville. J'espère y retourner bientôt. J'ai fait quelques vidéos du voyage.
I replaced the hydraulic booster on my 2002 cadillac escalade. I bled the hoses to make sure their was no air but the brake pedal is still loose. What could be the problem? Please help!!
you probably have air in the master cylinder.
Have you ever had issues with the vacuum pump. I’m assuming mine doesn’t work for my hydro booster. Does not turn on at all. Ran power to it and the vacuum pump worked. Would you know if there is a relay or fuse for this?
Great video man thank you
your welcome
Great video, would you mind adding a link or what kit you use please.
theres a little button on the lower right show me some super thanks, helps my channel to do these videos..thank you.
Getting 03 escalade going after 3 years. Power steering very hard to turn and brakes are poor and go to the floor but still provide 30% braking. Is it the hydroboost. Im not sure but power steering pump seems good. But the booster doesn't seem to leak. Brake pettal stiff when suv is off.
Fill your power steering with power steering fluid. Have someone start the car, and have them turn the steering wheel left to right. while there doing that, look at all the hoses that go from your power steering pump to the booster. If there is no leaks. then look under the booster ( see 2:39 ) see if its leaking there. Also make sure the belt tension to your power steering pump is good. good Luck.
very very good video
thanks!
I can not move to the left but when I drive forward I'm able to move left would this hydro brake booster be the issue?
i dont understand the question.
Do you think it’s possible to change seals without removing the whole booster from firewall?
There have been some guys that say that it can to be done. but I have never done it that way. Good Luck. When you have it done your going to save a lot of money.
You were very thero.. thank you
your welcome.
Is there some bracket or spacer between the master cylinder and booster? So im having an issue where my breaks automatically apply pressure slowly after about 10mins of driving they lock up. Someone said that missing spacer or bracket could be the culprit. Do u have any clue to wat may cause that issue?
I think you have a bad brake booster, there is a diaphragm in the middle of the booster.
EXCELLENT.
Thanks!
It’s the same video as the Yukon video he done
yeah this video is for those who can figure that out..
I can’t lie you helped out a lot with my gmc Yukon. Now my baby don’t leak at all thank you so much
@@tubbyt6318 your very welcome
theres a little button on the lower right show me some super thanks, helps my channel to do these videos..thank you.