Learn CAD in 10 Min : Turn Your Ideas into Reality
HTML-код
- Опубликовано: 2 окт 2024
- Learn CAD in 13 minutes!
3D printing is the future and the future is now! CAD and 3D printing can turn ideas inside your head into physical items you can use in real life.
In this video I'll show you the basics of CAD. There's no way all of CAD can be covered in a 13 minute video but hopefully it will demystify it enough for you to get in and start designing basic items.
Want to learn how to repair electronics like a pro? Forget wasting years going to school to get an electronics degree like I did. Don't waste time with history and economics, just go straight to learning how electronics work and how to repair them. Check this out - bit.ly/2Loej31
Tools used in this Video
- Digital Calipers : amzn.to/2JzZnNC
- Sketchup - www.sketchup.com/
- Fusion 360 - tinyurl.com/ybp...
3D Printers
FlashForge Creator Pro, this printer is a workhorse. We have two of these that have been running non-stop 24/7 for the past 2 years without a single issue - amzn.to/2Tpv3Vx
Comgrow Creality Ender - a simple aluminum printer that won't break the bank - amzn.to/2UXHmKg
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
-------------------
Current Quad Setup
FlightClub Neutron - tinyurl.com/y9...
Aikon AK32 20X20 ESC - tinyurl.com/y77...
Talon F7 Flight controller - tinyurl.com/y7d...
Foxeer Arrow Micro Pro - tinyurl.com/y7...
Tmotor F40II 1750KV - tinyurl.com/y8...
TBS Unify V3 - tinyurl.com/yc...
Lumenier AXii Stubby - tinyurl.com/y7...
TBS Crossfire Nano - tinyurl.com/yb...
Immortal T Antenna - tinyurl.com/yd...
My Video Equipment:
Main Camera - amzn.to/2SsBabY
B Camera - amzn.to/2SbvZNT
Favorite Tools
Weller Digital Soldering Station - amzn.to/2JngsXg
Dewalt Gyroscopic Screwdriver - amzn.to/2EOwLOq
Anker Powerhouse - amzn.to/2JGbOUz
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - / fpvflightclub
Follow us on Instagram - / fpvflightclub
I know there's WAY more to it, but you showed me that I could start doing this! Thanks a lot!!!!! You took all my fears of learning 3d printing and threw it out the window.
Tinkered is a lot easier
I really am starting to regret BSing my way though the cad class I took in high school
Fuck I have a design and engineering class tomorrow it’s gt and I’m shite at math
@@danndidntask4057 focus now profit later
Me too. My freshman year I took intro to engineering, and it was basically a CAD class. I sucked at it, and I never really tried. I wish I stayed in the engineering course for my high school.
Bro SAME.
Yup me tooth
I couldn’t catch on to this teaching style but thanks for the effort. I guess I need cad for dummies . A slower and simplified approach but I’m 52 years old and have a harder time catching on than a lot of people would.
I’m already capable enough at CAD to accomplish what was shown here but, I still enjoyed this video. Great way to get people to wrap their head around CAD and grow from there. Thank you.
The only and best teach of 3D print I’ve ever seen very detailed like it should b for someone not no how to use it cuz it can b intermediating, all others just do it but don’t explain into details how they got there
I can't thank you enough for this video I will watch this a hundred times over before I get it but very great explanation
Thank you so much. I learned a lot in this little tutorial. Very similar to making signs with a vinyl plotter that I'm familiar with. I thought 3d printing would take a long time to learn, but this crash course opened my eyes.
Great video! It was perfect for seeing it for the first time, and giving me the confidence to know that I can try it.
Awesome! Starting CAD classes this semester.
Bravo. You are a natural teacher. The ability to explain a complex task into a short easy tutorial, is rare. Some of the most talented, experts in their field, are horrible teachers because they lack this ability .Once again. Bravo. I am really impressed.
Winning the fight against the toothpaste tube :)
2 years later the toothpaste tube almost came back but James held on
@@rmbgtango7563 7
dude...thank you!! my first cad tutorial ...lets see where this goes!!
Finally a tutorial that actually is short enough to inspire the masses
Nice! Im starting to play around in tinkercad but want to learn SketchUp. I'd love to see more of these types of videos as well as the fpv stuff. 😉 Thanks.
Just putting it out there for the people reading this:
SketchUp is Not suitable for product design. You need a Parametric CAD program to accurately make and size your designs.
Thanks for the easy straight forward approach to Cad.. I've learned a lot.
Keep up the tutorials 👍👏
Wow! Thank you so much. I’ve had a 3D printer for years and never made anything of my own. That has given me the confidence to go and try.
Excellent video, I'm sure it will help many people get started in making things. Once I realized that a 3D printer was nothing more than a computerized glue gun it became very useful in making parts I could not buy.
Great video, dude! Thanks a lot! 😃
The printer is coming. I have the ideas. Will have to learn CAD but use it in Linux- probably with the open source program called SolveSpace. This video helped a lot- especially it has given me extra confidence that I can accomplish creating things that will be useful to me.
Finally a simple video to grasp a basic understanding.
Already understand 100% than i did before.
Thx for keeping it simple!
Thank you! Thank you! Thank you!
A video on 3D printing would be awesome! From which one a beginner would get to finished product and getting files!! Thanks man!!
ok, i'll start on it!
FlightClub Thanks! I’ve been watching since. Your QAV 210 video. That was my first build and I followed along! Excited to get more into the 3D print DIY! Thanks!
This was so educational. Thanks!
Exactly what I needed. Just a quick tutorial to share some basics to get started. It's pretty overwhelming at first glance.
This was great! Thank you!
Well done man! Thanks!
Definitely like to see a video on 3D printing
Would enjoy seeing you create a quad frame in a similar video!
Bro actually memorised what 10mm is in inches...
10mm=1cm, so everyone knows what a cm is in inches ...
Bro u must be well backwards. 10 mm in not 1 inch 😂
WHAT THE FUCK IS A KILOMETER 🛢️🛢️🛢️🛢️🦅🦅🦅🦅🦅🦅🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🔫🔫🔫🔫🔫🔫
Thank you so much!
Excellent video Mike, and yes we want more lol, after watching this video, I want to make so many things for my rc crawler. Thanks so much !!
Now i really have to thing about making RC plane cowlings be myself... Thanks for sharing :o)
Thanks for that!
Nice one man, yes please more videos
10 mm is 0.394 inches. Easy enough to say, and I understand how big it is. I dont know the difference between 10 mm and 10 m
u lied, said 10 minute but vid is 13
new cad engineers can be DANGEROUSLY mislead
Hey man, great vid! But I noticed the comments are full of random full names, I’ve heard that this may be a malicious third party attempting to reverse engineer the “filtered out” words (usually names of relatives) to gather data about you! But I really don’t know very much about this so take it with a grain of salt
Hey man, great vid! But I noticed the comments are full of random full names, I’ve heard that this may be a malicious third party attempting to reverse engineer the “filtered out” words (usually names of relatives) to gather data about you! But I really don’t know very much about this so take it with a grain of salt
Legend. Thank you
Good video Mike. Demistify 3d printing with a tutorial on arm guards for the Bangkok. Lol. Seriously though, this was perfect.
Bangkok arm guards demystified!
fpv-flightclub.com/products/flightclub-bangkok-arm-guards/
What 3d machine do you use?
Awesome video
You're Awesome!
Nice video 😊
It seems to me with everything I've looked at as far as making this a career with a company you have to have a bachelors degree!!! These companies need to remember this is 2021, why is learning a trade that you want to purse through a technical school a bad thing... SMH....
Make stuff and sell it urself! Turn the ideas in ur head to real cash
Awesome dude. I was here thinking it was going to be a whole lot more complex. Thanks 🙏🏾
2:28 Unless you're using an SLA printer.
OSM sir 🤘👏👏👏
What about building a house or building?
Thank you. just starting with 3d printing. Can you do another video on slicing? Thanks again.
excellent video! you achieved exactly what you set out to do...bust the myth that it is rocket science to design.
I was 2D designer doing business signage and I taught myself so it can't be that hard and after watching this I have realised 3D design might have more dimensions but it also has even better software available and some of them are free too...unheard of in the 2D print world!
Thanks for the Video you earnt a like and a Sub ;)
seems more complicated to learn than adobe illustrator and indesign . seems very detailed oriented job .
it work on my pc thx bro vеry much
Lol this guy is hilarious 🤣 love it
this is the best tutorial ive seen for the basics and getting started.thank you so much.
2:50 - TAKE NOT AMERICANS - //.... or '' twenty-five sixty-forths ''.... or '' seven sixteenths '' or ... '''nine fifty-eighths'' etc... ad nauseaum....
Great explanation - my real foray into CAD and 3D printing.... I'm here to learn. And that tutorial was a great place to start. Many thanks...
...And yes, please take us through the entire process of fabricating one of your aero-quad chassis or something .... With more details on the CAD aspect.
That's it... I'm buying a 3D printer
I think Fusion360 is free to use also for hobbyists so you don't have to be a registered student somewhere to use it. Also, I've been using Tinkercad for everything I've needed and so far I haven't felt too limited to motivate a change. But eventually I will...
Interesting, I actually wanna learn more about this. What colleges does CAD?
bro do you have any idea how expensive solidworks is?
Nice video. Do more :-)
I'm preparing for a interview and one of the key words was CADD which I had no clue to what it was. I've watched a few different video's which gave good breakdowns but your process of going through step by step on how to make something as simple as this device gives me more than enough knowledge to be able to at least talk about the tool through the interview. Thank You for this video and the new found interest.
Future is future
Finally! Metric>”standard” don’t ever get why US measurements. When the standard the entire world use is metric
Me an European Union citizen when comes the tip 2: "Ah yes... AMERICA"
I have a tiny metal part (similiar to a tiny metal screwdriver) I'm trying to put into a cad drawing for manufacture. They said to save it in 2d, and 3d. Is there any way I can do this with my phone?
Learn your freedom units my dawg.
Thank you! You're right, it's just a very short tutorial, but I am a lot less intimidated now!
Getting started seems a lot less overwhelming than I expected.
I think this video is a great starting point for people who are interested in cad!
Did you end up getting started
You really are a great instructor. I been trying for years to understand 3 D. Thanks
Good video. Explained in laymans terms.
I would rather design and print Drone pieces/frames than to buy them, ones available are limited and none I've found are what I want.
I’m in high school taking engineering design for once something actually sounds fun
Nice me too, I'm taking a CAD class
Thank you, thank you, thank you. Great tutorial, especially since it keeps intimidation at bay. Just the push I was waiting for. One question though. What printer would you recommend to start with? I know there are different budgets and categories so if I'm looking at a Prusa right now what would you think about it? Again thank you, I hope I have an opportunity someday to pay it back or at least forward.
Great vid
I'm using CAD for a Waaaaaaayyyy bigger project ie architecture
All those features in CAD just seem like cheating lmao. A moment of silence to all of the old school drafters and designers that had to do it all manually.
Really well explained video that covers most basic features in solid works. Thank you so much. Also would like to know if you have online tutorials.
I am just the beginner would like to understand CAD program first.
Is it easy to do cylinder or tubes like a gun barrel(no not a real gun ...lol)..a video game replica
All those tires would have been very useful any materials that can be rap around the earth would be useful.
ooooh i like this.
I learned nothing from this video. But then I am only a stupid doctor.
Demystification successful!
love that wink! thanks for the tip!!
That was fantastic Mike! I've been putting this off for way too long.
CAD for fpv is so helpful. solve any problems you have
Know what would be cool? The ability to take a 3D photograph and turn it into a CAD drawing to do a 3D print from.
A very good video and well explained.👍🏻
Thank you so much for this video, so clear and simple instructions!
This was really helpful. Thank you.
Can you save cnc files using sketch up?
FULLY DEFINE YOUR DIMENSIONS!!!!!!! GAAAAAAAAHHHHHH
can i use cad in a mac computer
Yes sir. Great job I can rebuild older car truck etc but download and install and this change make that change do you want this to change your device. Idk any of that. Got ender3 max and don’t know how to get stuff want to print. Been watching lots of videos. Yours is great 👍🏻 especially this one to do cad , sketch etc. you might want look to make a video on how to download and install cura , sketch, thingiverse or what you think is easy to start on. You’ll be surprised of how many people get someone to load the stuff so they can point and click. Probably get lot of views I look all Day couldn’t find what looking for. Most are settings and what to do after there downloaded. Just my two cents that’s not worth any. Lol. But very useful video thanks for your time and effort for making these videos for us. From ur wv hillbilly buddy stay safe.
Is it similar to Microsoft 3D Builder ??
Great video man. I just got into CAD today!
Awesome... thank you so much for sharing!
This was awesome thank you!
Up to speed Rocket bunny brought me here!
Awsome stuff man! I am trying to design a prototype for a product I have in mind and I have been debating whether or not to try to design it in cad software myself or resource out that part of the development process. After watching this, I think I should be able to do it myself and save money! Now I just need to buy a 3D printer haha