OBS Solutions Superduty Seat Bracket kit for 1980-97 F-Series Trucks

Introducing OBS Solutions Superduty Seat Bracket Conversion Kit for 1980-97 OBS Ford F-Series Crew Cab and Regular Cab Trucks. We have developed a bracket system that finally allows you to install seats from a 1999-2010 Ford Superduty into your OBS Ford truck the right way. Seat position and ergonomics mimic the OEM 40/20/40 seats for great visibility and adjustability for drivers of all shapes and sizes. Safety was also a primary concern, so this kit utilizes a truss system that mounts to the factory seat locations in the cab floor pan and requires no drilling for installation. In order to get the seats positioned correctly, there is a small area on the front passenger side that will either need to be massaged with a hammer of cut out and replaced with a small metal pocket that is included in the kit (PLEASE SEE VIDEO FOR MORE DETAILS). This product also requires the use of dual front power seats in order to allow them to sit low enough for correct positioning. This will require disassembly of each seat track assembly to install the included mounting feet and hardware. Manual front seats WILL NOT work with this kit. Brackets are included for the use of a flip-down front center console. A floor mounted console can be used; however, we do not include hardware or bracketry to do so.
Brackets are included to use the matching rear bench seat from the same 1999-2010 Superduty trucks. There are provisions for both the standard rear bench and 40/60 version that has the flip out tray system underneath.
We have not tested this product in either the OBS Ford Extended Cab or Bronco’s, those models unfortunately use a different floor pan and seat track system to allow access to the rear of the vehicle. Superduty seats do not fold far enough forward to allow what we feel is acceptable access to the rear of the passenger area.
The kit does not include wiring for power seat adjustment and heat functions.
Visit our website www.obssolutions.net for ordering information.
These kits are currently in production, and we anticipate them being available for purchase in 3-4 weeks. Please click the “NOTIFY ME” option and we will send you an email as soon as they are ready to order and ship.

[@incarsus]

you guys really need to make something like this for 92-96 broncos. For real.

[@richbarnhurst4655]

I've been watching and ordering parts for a bit now. just realized you guys are about 5 blocks from me. awesome products guys

[@n8_EUC]

Thanks for the ride in the Cowboy Truck at the No BS OBS truck show. I'm sold on this kit. Order coming.

[@obssolutions1466]

It's impressive right? Something you have to experience to believe. Thanks for coming out last weekend!

[@AK-vu7vk]

I love seeing you guys coming out with trick parts for these old trucks. Well done ! I’ll order some of these once I find some decent super duty seats.

[@ethanball1316]

Hey man, love the videos! Had a quick question if you could put me on a path where to go. I have a 93 f150 extended cab, And it has the bent seat and I want to put in the 40-20-40 seats that I pulled out of a salvage yard, however, it's not a direct bolt up. I was wondering if there was an easier way to do it or do I just have to Fab something up?

[@M1ST3RHYDE]

Great Vid, lovn the LDE. you bring to the table

[@matthewtucker4636]

I'm looking forward to seeing the complete setup. I've been pondering this project for a bit. Great job

[@Topsecret32]

I caught that 'Or if you want someone to go skiing' 😂😂😂😂

[@stephencastle2788]

Very excited for this! Maybe I should be the first to receive a set 👍🏻

[@MinuteMan2.0]

Will any king ranch seats fit this bracket?

[@javiermichel4618]

When will you guys make brackets for an extended cab OBS?

[@AKAFringe]

What mil KILMAT sound mat did you us?

[@playinghookywithdavidchapa387]

I got a set of mechanical seats from a ‘19 superduty that i want to put in my 94 F150 short bed single cab… will these brackets work for that? Or do you have something that will work?

[@obssolutions1466]

Sorry, we don't have any brackets that work with the non-power manual adjustment seats nor the newer 17+ stuff.

[@playinghookywithdavidchapa387]

@@obssolutions1466 yea, i have a shop truck with the same seats, just vinyl, and i see why that bracket wont work… if i figure something out ill pass it along to you guys… im a fire truck mechanic for my day job

[@wedontdrivestock223]

Would this work with extended cab?

[@obssolutions1466]

It won't, unfortunately the floor pan is different and the seat bracket trusses won't fit.

[@lilusbport3027]

Will these work in my extended cab? I would just want the front seats. Also if it doesn’t work then what do y’all recommend

[@daisbestDA9]

Pretty sure the belly pan is different

[@pappy3422]

I’m amazed how clean you got everything! What’s your secret?

[@zenoalexander3163]

Will this bracket kit work for the 96 Bronco as well?

[@rydred0823]

so real question would 2017+ superduty seats fit in an obs? specifically king ranch

[@obssolutions1466]

They may, but not with this kit.

[@BobTheBreaker9]

U guys don’t like ppl having extra money do u?

[@jordankerr2838]

Go to a machine shop or welding shop and see what they charge you to make every piece. Osb solutions.. it’s a high price but when it comes down to it, it’s not over priced. A wiring kit for the seats thrown in with it would really seal the deal so we get the most for our money

[@nickcastillo705]

Great video. Curious at the 3:30 mark. What stereo do you have installed?

[@M1ST3RHYDE]

Aint nothing wrong with a lil Road Ski.

[@michaelmapu572]

What about the 2004 Ford Excursion seats?

[@scottbarnes7268]

I just wanna put 1st gen king ranch seats in my super cab 😆

[@jesuslopez6609]

Where i found that kit

[@wedontdrivestock223]

Would this work with extended cab?