Nice video,1st thing I do before I start to work on my bikes is to have bowl with a bit of fuel for the bolts so I don't have to search for them I highly recommend it
Also enjoy watching your videos. I have same raptor and I tried your fuel optimizer but went with the power commander V(5) instead and it’s so much better power wise and torque throughout the different gears especially (2-4)
That was ALOT of plastics removal for sure. Not sure this optimization of fuel change worth it in basically stock form. Im goin w/ just a Yoshimura slip on exhaust AND better air intake kit! Thats it folks. Nothin else in small mods worth it. '21 Raptor 700R-SE.
You should have a Yoshimura pipe on that. I have a 2014 Lt Z400 and the Yoshimura pipe on the Z, compared to my buddies z400 that has a Hmf full system pipe sounds like crap compared to my Yoshimura slip on on my 2014 z400. My bike sounds 10,000 times better than his cause he got a Hmf on a Suzuki 😬🤦🏾♂️. I have the Hmf performance pipe on my 2012 kfx 450r (Hmf pipe came on the Quad already Brand New when I purchased the '12 kfx 450R) with the optimizer and a FCI Air Box and it doesn't sound anywhere near as good as my Suzuki with the Yoshimura slip on with no programmers just open lid on airbox. I want the full Yoshimura for my '12 kfx 450r, but kinda stuck with the Hmf as I just spent over $2,500 recently after I bought the '12 Kfx 450R for $3,500)but I spent $2,500 on Hiper Tech3 Beadlocks, (6 New Hiper Rings Blue n Green), Brand New Razr2's, Hmf Optimizer and a few other parts like blue levers, gas cap, brake block off, oil filter cap, rad hoses, blue nerf nets, blue green oury grips, Accerbis bark busters(black with green letters) and a few other small parts.. I'm done spending for a while lol, atleast till new shocks, A arms, and a Durablue axle. But I'm 100% for sure that I know it will sound so much better than the Hmf I have on the kfx now. I only run Hmf on Hondas where they belong. Imo, Yoshimura is personally made just for Suzuki and Kawasaki.... Hmf is made for Honda Trx 400s/450r. Hmf sounds the best on Hondas hands down just like Yoshimura sounds incredible on Kawasaki and Suzuki hands down. To each their owm tho. This is just a reccomendation from current experience and past.
@@juststatingfacts01 hey I had those hiper tech 3’s on my 450r and the metal inserts that the bolts on the beadlock thread into spun in the plastic due to corrosion. Hiper has terrible customer service from my point of view and never got me back. Please put never seize on the bolts so you don’t have this problem down the road I beg you!
Hey nice video. I have the HMF optimizer. I’ve connected the ground wire to my battery’s negative post and screwed it down. The optimizer won’t turn on. Is it because I have to connect it to a better ground. But it looks like you connected to the battery post.
Right by the fuel injection plug is 2 bolts.into the frame. Unscrew one and ground it str8 to the frame with that other bolt that is there factory for a ground point. Use dielectric grease as well on the plugs insides and on the metal screw your grounding. Trust me.
Hey brother, nice raptor! So I'm buying this same setup up the air filter, and the hmf exhaust but I'm doing the full one not slip on. Did you have to adjust the optimizer at all and if so what are you running at? Just dont want any problems as I'm not super mechanically inclined. Hope to hear from ya soon. Happy riding!
Isaac hey thanks awesome choices .. if it’s an hmf optimizer it’s pre programmed so you don’t need to even worry just install if it’s another optimizer download the mapping of the exhaust and bike to input the ratios
Hey how’s the tune optimizer holding up for you? Was it a good buy? I’m looking to get one for my 2016 Yfz 450 but I’m not sure if I should get the HMF Optimizer or the Dynojet Power Commander
Sorry. I know this is 11 months old. But do you think the hmf optimizer would work just fine with my yoshimura pipe? Yes right? Because all it does is add more fuel huh?
That optimizer is meant to be ran with NO AIR BOX LID EVEN IF U HAVE A FCI STIL NOOOOO AIR BOX LID FOR THE TOP PERFORMANCE. IT'S ON THE PACKAGE IN THE INSTALLATION MANUAL TO RUN THIS SPECIFIC HMF PROGRAMMER WITH NO LID.
@@marcorivas8514 yes! The instru6will explain that exact thing. Just says it's programmed to be ran with no lid to the factory Air box. Even the fci air box run no lid but you get tci e the air with the wider fci wind tunnel.
Where did you find those decal sticker numbers you have for the raptor? Been looking for stickers like those and can’t find them. If you could let me know thanks
Hi . I got 2013 raptor 700r . And I buy this hmf optimizer. But I don't know how to tuning. And I put k and n filter and hmf exhaust. It whole by so much help if u chow how to tuning thank you...
atvchamp12345 with an exhaust I believe it’s best to run an optimiser to get the best performance because you don’t want the bike to run too lean or too rich. It should be just right
man i love the video… i love how long you take to get to the fucking point i mean seriously this should’ve been a 5-7 minute video what a waste of oxygen and sperm. thumbs up from me! 👍🏼
Yoshimura is best exhaust slip on . Forget the whole exhaust! Save ur $ for the Yamaha GYTR air filter upgrade kit. He added it. I did too! I have YFZ450X & new '21 Rapter 700R-SE.
AKThrottle907 it’s s simple bolt on and you won’t need to do any tuning it programs to your bike on its own and Incase you want to tune it’s so easy on the hmf website the video walks you through it
Brandon Bowen id start at the battery and check everything, pull all the connectors and check for corrosion , moisture ect , it is also possible you may have pinched a wire coming off the optimizer.
Did you program the fuel optimizer or did you just plug it in and start it or what did you do
Nice video,1st thing I do before I start to work on my bikes is to have bowl with a bit of fuel for the bolts so I don't have to search for them I highly recommend it
Ta good idea 👌🏻
Also enjoy watching your videos. I have same raptor and I tried your fuel optimizer but went with the power commander V(5) instead and it’s so much better power wise and torque throughout the different gears especially (2-4)
thanks dude was looking into the v5 i just figured hmf pre programs their optimiser and design it to specifically work with the comp exhaust
Cant you have the fuel optimiser and the power command at same time fitted
Zak 0114 I don’t think they go together
You can’t do both it’s only one or the other
That was ALOT of plastics removal for sure. Not sure this optimization of fuel change worth it in basically stock form. Im goin w/ just a Yoshimura slip on exhaust AND better air intake kit! Thats it folks. Nothin else in small mods worth it. '21 Raptor 700R-SE.
Nice! Got the same hmf pipe on my z400! I'll be watching to see how it rips with all your new mods!💪
Terrell Spivey nice cheers dude
@@carbonelement77 yezzir!
You should have a Yoshimura pipe on that. I have a 2014 Lt Z400 and the Yoshimura pipe on the Z, compared to my buddies z400 that has a Hmf full system pipe sounds like crap compared to my Yoshimura slip on on my 2014 z400. My bike sounds 10,000 times better than his cause he got a Hmf on a Suzuki 😬🤦🏾♂️. I have the Hmf performance pipe on my 2012 kfx 450r (Hmf pipe came on the Quad already Brand New when I purchased the '12 kfx 450R) with the optimizer and a FCI Air Box and it doesn't sound anywhere near as good as my Suzuki with the Yoshimura slip on with no programmers just open lid on airbox. I want the full Yoshimura for my '12 kfx 450r, but kinda stuck with the Hmf as I just spent over $2,500 recently after I bought the '12 Kfx 450R for $3,500)but I spent $2,500 on Hiper Tech3 Beadlocks, (6 New Hiper Rings Blue n Green), Brand New Razr2's, Hmf Optimizer and a few other parts like blue levers, gas cap, brake block off, oil filter cap, rad hoses, blue nerf nets, blue green oury grips, Accerbis bark busters(black with green letters) and a few other small parts.. I'm done spending for a while lol, atleast till new shocks, A arms, and a Durablue axle. But I'm 100% for sure that I know it will sound so much better than the Hmf I have on the kfx now. I only run Hmf on Hondas where they belong. Imo, Yoshimura is personally made just for Suzuki and Kawasaki....
Hmf is made for Honda Trx 400s/450r. Hmf sounds the best on Hondas hands down just like Yoshimura sounds incredible on Kawasaki and Suzuki hands down. To each their owm tho. This is just a reccomendation from current experience and past.
@@juststatingfacts01 that's nice to know! but I guarantee you'll loose every race against me! Lol ruclips.net/video/3-bvcnnZ_xQ/видео.html
@@juststatingfacts01 hey I had those hiper tech 3’s on my 450r and the metal inserts that the bolts on the beadlock thread into spun in the plastic due to corrosion. Hiper has terrible customer service from my point of view and never got me back. Please put never seize on the bolts so you don’t have this problem down the road I beg you!
Hey nice video. I have the HMF optimizer. I’ve connected the ground wire to my battery’s negative post and screwed it down. The optimizer won’t turn on. Is it because I have to connect it to a better ground. But it looks like you connected to the battery post.
Right by the fuel injection plug is 2 bolts.into the frame. Unscrew one and ground it str8 to the frame with that other bolt that is there factory for a ground point. Use dielectric grease as well on the plugs insides and on the metal screw your grounding. Trust me.
Best installation video ‼️
Trey Geter thanks 🙏
did you have to do any tuning with the filter ? i’ve heard you had to do some tuning with the k&n filter
Hey brother, nice raptor! So I'm buying this same setup up the air filter, and the hmf exhaust but I'm doing the full one not slip on. Did you have to adjust the optimizer at all and if so what are you running at? Just dont want any problems as I'm not super mechanically inclined. Hope to hear from ya soon. Happy riding!
Isaac hey thanks awesome choices .. if it’s an hmf optimizer it’s pre programmed so you don’t need to even worry just install if it’s another optimizer download the mapping of the exhaust and bike to input the ratios
@@carbonelement77 thanks for the reply! So I dont have to touch it at all even with the knn air filter?
Isaac yes it takes the filter into consideration
Been wanting to get one but it’s not in my budget rn 😭
alexis flores no rush hope your able to get one at some point
Debating on getting the HMF exhaust and opt or the Big Gun Evo dual exhaust and Big gun opt.
Hey how’s the tune optimizer holding up for you? Was it a good buy? I’m looking to get one for my 2016 Yfz 450 but I’m not sure if I should get the HMF Optimizer or the Dynojet Power Commander
Very good I’m sure either will be fine :)
What would be better with a yoshi v2 full exhaust HMF fuel optimizer or power commander V ?
question? idk if you would know but does that work on other exaust brands or just hmf ones? having a hard time looking for one
Nice job. U forgot one thing, to remove those factory reflectors !! Lol. Jmo
Chris Callas hehe i like them cuz I drive home from the trails when it gets dark :)
They add 10hp!
@@m8sandman lolol. Added safety 👍.
Sorry. I know this is 11 months old. But do you think the hmf optimizer would work just fine with my yoshimura pipe? Yes right? Because all it does is add more fuel huh?
Yes but you might need to program the optimiser for your pipe which is very easy to do :)
Keep the vids of The Raptor coming.
Christopher Giumarra thanks will do ☺️🙏
do you have a video on how you tuned the optimizer
Do not ground the wire to the battery you will get a code 39 and you will have to send optimizer in.
I want to do this same setup but don’t u have to change the settings of the optimizer because u put a intake ??
Also wondering this..... if you figure it out please let me know.
Same 😕
That optimizer is meant to be ran with NO AIR BOX LID EVEN IF U HAVE A FCI STIL NOOOOO AIR BOX LID FOR THE TOP PERFORMANCE. IT'S ON THE PACKAGE IN THE INSTALLATION MANUAL TO RUN THIS SPECIFIC HMF PROGRAMMER WITH NO LID.
really? so it comes preprogrammed so you take off the filter lid
@@marcorivas8514 yes! The instru6will explain that exact thing. Just says it's programmed to be ran with no lid to the factory
Air box. Even the fci air box run no lid but you get tci e the air with the wider fci wind tunnel.
Where did you find those decal sticker numbers you have for the raptor? Been looking for stickers like those and can’t find them. If you could let me know thanks
i got these from a company called mx numbers they pretty strong check them out
Yeah those rear fender Fox stickers are sharp.
Hi . I got 2013 raptor 700r . And I buy this hmf optimizer. But I don't know how to tuning. And I put k and n filter and hmf exhaust. It whole by so much help if u chow how to tuning thank you...
I have a yfz 450 r se will I have to buy the air filter adapter
Wow way more throttle response right? Installing mine later.. I hate the 1st gear take off bog out lol
Eric Connolly yes you do notice a much better response :)
just bought a 2020 700r im intrested in an exhaust system but are these optimizers for the fuel mandatory? or is just to maximize performance?
The raptor runs extra lean from factory , but rich in the top end , I always run one
atvchamp12345 with an exhaust I believe it’s best to run an optimiser to get the best performance because you don’t want the bike to run too lean or too rich. It should be just right
does the fuel optimizer come with the exhaust or is that a separate purchase ?
Ive seen that you can purchase both on ebay for like $630
can u use it with a slip on exaust?
You should change the handlebar 😎👍
Could I use this with a different exhaust ¿
Always ground to the frame not Battery. And the default settings in the optimizer is for the exhaust and filter with the Air box lid removed
Very nice video ❤️
8 months later, how’s it running ?
Like a gem :)
Did it run better after the optimizer???
yes you can feel it
Cool video man and really great Quad! Just sub your channel :)
Yamaha Raptor 700R thanks bro appreciate it
man i love the video… i love how long you take to get to the fucking point i mean seriously this should’ve been a 5-7 minute video what a waste of oxygen and sperm. thumbs up from me! 👍🏼
Can I run this optimizer with a yoshimura exhaust
I think you can run any optimizer for any exhaust. What type of quad do you have because you don’t really need a optimizer for yoshimuras
Should be fine just find the right mapping for the bike ! It’s made to work with an hmf as a plug n play 🙏 good luck
Yoshimura is best exhaust slip on . Forget the whole exhaust! Save ur $ for the Yamaha GYTR air filter upgrade kit. He added it. I did too! I have YFZ450X & new '21 Rapter 700R-SE.
Nice
So it’s just plug in and your good to ride
AKThrottle907 basically :)
Carbon Element because I’m thinking about getting the performance slip on with the optimizer but don’t really know how to do all the tuning and stuff!
AKThrottle907 it’s s simple bolt on and you won’t need to do any tuning it programs to your bike on its own and Incase you want to tune it’s so easy on the hmf website the video walks you through it
Do the stickers make it go faster
Kesha Johnson hehe lol
Yes
Did this exact set up an 20 hours later my engine light came on.. lol
Brandon Bowen strange I know a few running this set up
A loose connection can cause that
Raptor Dan any ideas where I should check ? I looked several times but can’t find anything
Brandon Bowen id start at the battery and check everything, pull all the connectors and check for corrosion , moisture ect , it is also possible you may have pinched a wire coming off the optimizer.
You feel more power with the optimizer?
jesus morelos you do notice it sharpen up
I paid alba racing 200 they flashed my ecu