The Cuervo Racing Raptor 700 FCI intake Install Video 2006- 2021
HTML-код
- Опубликовано: 28 авг 2024
- Cuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/u... Cuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/u...
Thanks man for all you do for us riders. You take the time out of your day to teach and educate us on these machines.
I follow all your videos, I always learn things with them, so thank you very much one more time. It will be good to see the power gains with the +3 TB on the dyno :)
This is such good timing for this video. I been holding off on ordering this because ive heard its a real pain in the ass. I emailed you about buying a tune for the PCV. Im just running no baffle right now on my 2021, but Im waiting on my full monster exhaust
Get a Pro Tec moflo airbox cover. Better than stock airbox cover & more air! Easy real 3-4hp w/better protection.
The monster shorty is on 🤗🙌🙌sooo loud I love ❤️ it .putting in airbox and controller now
Looks pretty straight forward.
Getting my new raptor in a week 😁😁guess I better get to calling you 🤗see what I'm gonna do to this bad boy once she is broken in 👍🏻👍🏻
@MrCeurvoRacing You AIS kit come with the plug gor the ais, if you remove the other long hose off the AIS so whats used to plug that spot??
I just got my fci intake for my 2021 raptor 700r, and I’m learning a lot but I was wondering if you have to do a AIS delete in order to install the intake or can I just run my AIS to my fuel customs intake like the factory one?? And if so what’s the difference if I do or if I don’t? Any info will be a big help!
Hey Dakota did u end up deleting your ais in order to install your fci? Or did u did it like in the stock one?
The 3 hoses
When doing the fci install this way and having the ais delete, are both of those holes capped?
blessings,my 2016 blew up during a low rpm burn out, it had a big gun fuel control, no exhaust mod, all stock, what is wrong there...???
You are using a bar fitting that’s doesn’t come with. What can I use it instead for the lower hose that goes to the intake
Do you have any idea where I can buy more hose ? Of course like an idiot when I did my AIS delete I threw that tubing away.
My fci keeps disconnecting from the throttle body no matter how hard I tighten it down. Any tips or tricks to prevent it from falling off
Does the 2008 model have a hose coming from the throttle body?
hey cuervo what could you use as a replacement for a straight fitted fuel customs didnt send me one
My 2020 is stock. I got the big 3 and AIS delete. Should i do the ais deep first or wait till im done
Is it possible for the filter to fit in the box without cutting a side off?
I have a 740cc stroker with a 6mil crank on pump gas will It be safe use vp 110 or mr12?
hey Mr. Cuervo
just got my raptor back not to long ago from some dudes that stole it and was wondering if I need to order a new wiring harness since they cut my wires to start quad and maybe just retap the wires back together??? TIA
Depends on where they cut it.
Send some pics to Sales@cuervo-racing.com
Does the KandN power stack air filter fit in the box
What are the wheel/tire combo on that raptor? I want a setup to run at my local drag strip and the more I dig into "street" tires I realize many of them are not rated for very high speeds...like not even 70.
Those are Duro Top fighters 21x10x10. They are heavy. I use them for the dyno
Hey Mr Cuervo
I have a 2021 700r SE CA Model. Are there any nerf bars that fit with CA C.A.R.B. add on. Or is there a way to remove the whole system so that any set of nerf bars fit??
Should be easy to relocate or move it. I would buybthe nerf bars u like and mod the mounting or remore as needed
Thank you for this video, i just did my big 3 and i am looking at more mods, would you recommend a 50mm throttle body to go with the FCI intake?
The FCI intake tube will not fit on the 50mm TB..you’ll most likely need to run a velocity..and in that case if you wanted to run a airbox, you would use the FCI airbox and filter with the velocity tube..I believe Daniel and Cuervo Racing can hook you up with the goods which ever way you go.
50mm TB is a bit much without head work, but some people gotta take it one mod at a time, it gets expensive after the big 3.
Recommend to bore oem throttle body to 47mm . Factory fitment and no low end losses
Why not use the ecu bracket that’s been supplied? Vibrant issues?
To me its easier to cut the oem box and use the oem hardware
Do you need to unplug the ais vavle?
No
What if im not deleting the ais would i still be able to follow the same thing u did? Please help
What did you end up doing
Do you have the kit in stock ? Or need to wait for order
Yes in stock currently
@@MrCuervoRacing do you think cutting a bigger hole in the stock air box. And putting the fci kit with it might work ? Seems like it would be close to fit
Price currently ?
@@poorwhiteboy6521 I remember I saw someone did it, and it fits pretty good, you just need to make some kind of front shield where the intake meets the stock air box.
How much for this intake? I have the 2017
Cricket's.....
200$ without box 300 with box
Whats the pt of an unreliable 60hp Raptor 700R? Ridiculous.