Damn, crazy how headlights can make a vehicle look good or bad!!! A very important part of a vehicle in so many ways!! I just put new headlights on my car last week and I'm looking at my car twice now lol. Great job!!!
Thank u for posting this, have the same lights as these, been struggling , came to tbe conclusion i need to cut, and u have confirmed iam not just doing somthing wrong lol
Thanks for the vid. I was planning on buying them after the new year, but your video solidified that my decision to get them is the correct decision!!!
Damn I just yesterday finished up this same set of headlights in my 93 sure wish I'd known about The Cutting needed to get these to mount upright. I spent probably half a day trying to get them to fit properly before deciding to cut. what a pain in the butt. and now today I find this video Just My Luck
@@CPsGarage installing these same lights on my 95 power stroke! Question on the harness install. The great black and red back wires... Do you cut those and connect them directly to your new harness or did you tap into them?
Hello, I just bought these same headlights and I have them installed, would you possibly make a video going in depth about how you put together the wiring harness?
Those lights look awesome. Rather than a blacked out Ford grille emblem you should consider a lighted one in blue. That would really put the finishing touch on an already cool truck.
I have always loved Ford trucks and cars from Ford because it’s American made my grandfather had a 1970 pick up truck 4 x 4 I forget the model name either a Ford 350 or 250 or 150 I don’t really remember all I remember That it was very fast and very reliable. I do love Toyota pick up trucks better though because it’s made in Japan and my friend has a 2018 Toyota RAVE XLE with moonroof this car stereo is OK. It doesn’t rock the house so to speak, but it is very very beautiful car, very aggressive and fast I love putting it in the sport mode and Eco mode.
@@CPsGarage if Ray suggests someone, I will check it up 😁. I am not car repair person but like to watch other people repair them 👍. BTW thank you and no problem, keep up the good work and you got another sub 😎. Have a great day everyone 🙂
Did you not need the "hyper-flash harness" because these trucks don't need them or did someone else already add one...sorry I'm confused on that part. Also do you have a video of the other harness you did use that you made for the lights?
Didn't need the harness because someone had replaced the flasher with a LED compatible flasher. The other harness is just a couple of splices and connecters wrapped up in tape.
Haven't gotten back to it. Between work, side work, and a new baby we have had a lot going on. It's on the list of things to do. I will give one heads up if your connectors are missing the gaskets they will fill with water and damage the c bars.
With the LED I have in it it's has no problem lighting up the road. The change from my original lights to these are so drastic I wouldn't know the real difference between stock lights and these. I went from not being able to see the road to being able to see everything. I may notice more once I start driving more in the dark.
Did you have trouble getting the beam in the right spot? I just installed these. The housing on the back of the light is way to big and hits the metal frame of the truck. Between the light and the battery. So I can't angle the light far enough up... I'm just lighting up about 5 feet of ground in front of the truck
I just had to modify the black piece. I was able to get a ok beam pattern. I plan on readjusting them again one I restore the truck. Until then they are ok.
So you wire drl wires into wire harness for module then just plug module in and thats it? Drls will come on all the time when engine is running without headlights? Are u still happy and are the still working good?
I'm happy with them for the most part. If your sockets are missing gaskets water will get into the lights and damage the bars and stain them. The adjuster light ever other aftermarket ones suck. If you can find Ford adjuster in good shape use them. The DRL'S harness is already there. I just cut tlone of the wires to supply voltage to the c bars. The C Bars are on when the truck is running or key on with parking lights on.
@@CPsGarage you mean the bulb adjuster that comes with the lights suck? Do they sell ford adjusters? Dont even know what they are. I think ebay has drl module lmd100 for $86. I was looking at baja retrofit he has same drlmlights but put in hids but they are $750.
Really nice! I've got a 1994 ford flareside that I want to upgrade the lights on. Should I use obs or do you recommend another brand. I kinda want something that bolts right up because I tend to break things that need to much modification. Lol
@@roosterscruiser nice! Love seeing the younger generation into these older trucks. I think the lights look pretty cool. I think what sets them off is the bumper front he 17- and up trucks. This guy on RUclips call blowing diesel sells bumper bracket kits to install the newer bumpers.
I need your help i try to do the same on my 1996 f250 i install those blinkers it switch the color but dont flash like suppose, that i missing something??????
It won't be just OBS but it will definitely have a lot of it. I plan on having more older fords like the Fox and SN on as well. Who knows what else will show up.
Would it be okay to run the C ring lights and the fog lights with the same wire? I have the same bumper and it has the fog lights but i also want the fog lights to be running as daylight
If you used a relay. I personally wouldn't run fogs and running lights on that circuit. Relays use alot less amps and I personally don't know what kinda power the DRL module can put out.
@@rubenguerrajr5833 I do not. That was before I started RUclips but I may do a video. I'm thinking about getting a different set of brackets from my man Blowing diesel.
It's a 2017. No it wouldn't bolt on. The 11-16 bumper would be the closest to fitting you're truck. You still would have to modify it to fit. There are places that sells the adapter brackets.
I bought some orangeade led drl cbar headlights like these and I wired them in but they don’t turn on do I need to buy the separate module if so why didn’t the seller or any seller for that means have a description on what you need for the lights I feel like all the things I needed for it to work should’ve just came in the box
@@CPsGarage I just got mine in and didn't realize they came in three pieces I might attempt it tomorrow idk why they don't make it simple with wiring and all that
Hey, sir. Appreciate your dedication and effort on the video. We just reached out to you via email for inquiring an opportunity of collaboration, hope hear from you soon.
Anybody that puts that Kind of malarkey in a truck !! Has got too much money and a lack of neurological functioning and would definitely buy property on Mars.. .
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Damn, crazy how headlights can make a vehicle look good or bad!!! A very important part of a vehicle in so many ways!! I just put new headlights on my car last week and I'm looking at my car twice now lol. Great job!!!
Thank you. 100% agree. It makes the truck look completely different in a good way. They amount of light out front now is crazy.
Can you make a video more in depth on how you made the wiring harness and how you connected them?
They should not be allowed to sell those if they don't fit properly plug and Play that's a lot of work great job
Crate motors aren't plug and play... it's called gearhead ingenuity. Knuckleheads need not apply.
Thank u for posting this, have the same lights as these, been struggling , came to tbe conclusion i need to cut, and u have confirmed iam not just doing somthing wrong lol
You're welcome
Thanks for the vid. I was planning on buying them after the new year, but your video solidified that my decision to get them is the correct decision!!!
I need to make a update one these. Just make sure all your gaskets on ALL the lights are there. If not they will fill with water
@@CPsGarage Thanks for the heads up. Knowing my truck and all the aftermarket crap under the hood from a previous owner, they are probably not.
What a gorgeous ol sweetheart of a truck.
The Jetta is getting jealous
Damn I just yesterday finished up this same set of headlights in my 93 sure wish I'd known about The Cutting needed to get these to mount upright. I spent probably half a day trying to get them to fit properly before deciding to cut. what a pain in the butt. and now today I find this video Just My Luck
Hey at least you found the channel now 😁
Nice truck. Looks like a lot of hard work. Looks good 👍🏽
Recommended by Rainman Ray!!! Great content and I’m looking forward to more!🎉🎉
Thank you. I plan on making more videos. I have a bunch more work to do on the truck.
@@CPsGarage installing these same lights on my 95 power stroke! Question on the harness install. The great black and red back wires... Do you cut those and connect them directly to your new harness or did you tap into them?
Those new lights look awesome.
Thank you!
Hello, I just bought these same headlights and I have them installed, would you possibly make a video going in depth about how you put together the wiring harness?
Maybe when I get around to working on the OBS again. To many 3.0 F150 and JLR's to work on right now.
Man! the old girl be styling now CP!!!👍👌😉...later 👍💪💯
Like the John cash song one piece at a time 😂
Great looking truck brother. Love those lights. What a difference compared to the OE ones with cataracts.
You ain't lying 🤣. Even misadjusted they give off more light
Those lights look awesome. Rather than a blacked out Ford grille emblem you should consider a lighted one in blue. That would really put the finishing touch on an already cool truck.
Good idea💡 maybe I'll have to get both and see which one I like better.
I’ve been trying to find an illuminated logo for the grille and I can’t find any online. If anyone can find one it would be awesome
Ray sent me. Now I need new updated headlights.
It was definitely worth the time and money to upgrade them
I wanna do something similar to my 96 f150. I love the blacked out look in the front.
The black out look is 💯. I love it!
Interesting look. Good job.
Thank you
I have always loved Ford trucks and cars from Ford because it’s American made my grandfather had a 1970 pick up truck 4 x 4 I forget the model name either a Ford 350 or 250 or 150 I don’t really remember all I remember
That it was very fast and very reliable. I do love Toyota pick up trucks better though because it’s made in Japan and my friend has a 2018 Toyota RAVE XLE with moonroof this car stereo is OK. It doesn’t rock the house so to speak, but it is very very beautiful car, very aggressive and fast I love putting it in the sport mode and Eco mode.
I love the 90's and older stuff. New stuff is cool but not as cool as a old 7.3
Awesome video brotha
Thank you brotha 👍 gonna try to keep them coming
@@CPsGarage please do so.
@@BeardedFordTech I have plenty to do on the 7.3 and Mariner hybrid to keep me busy till December 🤣🤣
@@CPsGarage I have a whole fleet to keep me busy. I don't think I'll ever catch up.
@@BeardedFordTech I'm hoping to start attracting some more side work.
Man i want a 7.3 powerstroke...i love my 7.3 idi but its too slow...thanks for the video!! Im subscribin
I'd agree the idi is considerably slower than even though 7.3 Powerstroke
That engine sounds good!!!
Not bad for a engine that has 558,000 miles on it.
@@CPsGarage WOW 😱
@@danjones3402 I've put about 200,000 on it myself in the last 10 years.
@@CPsGarage Damn very solid truck!!
@@danjones3402 Florida truck only has a little rust on the pinch weld around the weather stripping.
Comming from Ray's channell 😁
Welcome thank you for stopping by
@@CPsGarage if Ray suggests someone, I will check it up 😁. I am not car repair person but like to watch other people repair them 👍. BTW thank you and no problem, keep up the good work and you got another sub 😎. Have a great day everyone 🙂
Did you not need the "hyper-flash harness" because these trucks don't need them or did someone else already add one...sorry I'm confused on that part.
Also do you have a video of the other harness you did use that you made for the lights?
Didn't need the harness because someone had replaced the flasher with a LED compatible flasher. The other harness is just a couple of splices and connecters wrapped up in tape.
@CP's Garage ok so on my 97, I'd more than likely need that harness...or buy new dongles for the LEDs?
Great video thanks man
Thank you!
First
Your day early Ray 🤣🤣🤣
@@CPsGarage I’ll be waiting….
Doooo Deee Doooo Deee Doooooo!
Pick up the 🤳
Looks really great! What lights do you use for your main low/high beam?? Are they LED aswell??
They are high low LED's all parts are listed in the description
Just installed these on my truck but the beam is garbage points straight to ground even with the adjustments all the way up
Wow those look great!!
Thank you 😋
Long term review of the headlights- are you happy with the light output and beam pattern?
Haven't gotten back to it. Between work, side work, and a new baby we have had a lot going on. It's on the list of things to do. I will give one heads up if your connectors are missing the gaskets they will fill with water and damage the c bars.
Is that a stock front bumper?
2017 super duty
How’s the cutoff on the beam pattern? Those housings don’t have projectors
With the LED I have in it it's has no problem lighting up the road. The change from my original lights to these are so drastic I wouldn't know the real difference between stock lights and these. I went from not being able to see the road to being able to see everything. I may notice more once I start driving more in the dark.
Link for the headlights doesn’t work. What are the headlights called so I can search them?
Link updated
Now that’s a cherry upgrade!
Croutster!
Did you ever find out where the black emblem was?
Not yet. Personally have been looking as of the last 2 months. Been more worried about getting my remodel finished.
@@CPsGarage Alright
Did you have trouble getting the beam in the right spot? I just installed these. The housing on the back of the light is way to big and hits the metal frame of the truck. Between the light and the battery.
So I can't angle the light far enough up... I'm just lighting up about 5 feet of ground in front of the truck
I just had to modify the black piece. I was able to get a ok beam pattern. I plan on readjusting them again one I restore the truck. Until then they are ok.
Those look very good.
Thank you. It came out better than I thought it would.
Did you have to trim the radiator support where the headlight buckets come in as well as the plastic headlight support?
Had to trim the plastic not the core support
@@CPsGarage Oh ok, I had to trim my radiator support as well
Looks really good
Thank you. I haven't really been able to drive in the drak yet. Never go anywhere anymore 😂
What bumper do you have?
17-19 super duty
Did you have to do anything to fit that newer front bumper?
You need a set of brackets. I'd recommend the ones from blowing diesel. Go check out his channel and let him know I sent you.
Where can I buy the led flasher to install these lights? And do you have a Facebook page?
Amazon search led flasher. I don't have a Facebook page
So you wire drl wires into wire harness for module then just plug module in and thats it? Drls will come on all the time when engine is running without headlights? Are u still happy and are the still working good?
I'm happy with them for the most part. If your sockets are missing gaskets water will get into the lights and damage the bars and stain them. The adjuster light ever other aftermarket ones suck. If you can find Ford adjuster in good shape use them.
The DRL'S harness is already there. I just cut tlone of the wires to supply voltage to the c bars. The C Bars are on when the truck is running or key on with parking lights on.
@@CPsGarage you mean the bulb adjuster that comes with the lights suck? Do they sell ford adjusters? Dont even know what they are. I think ebay has drl module lmd100 for $86. I was looking at baja retrofit he has same drlmlights but put in hids but they are $750.
Link for housing didn’t work. Please re do
Link updated
Is that a 2010 bumper? Look sweet
2017
Really nice! I've got a 1994 ford flareside that I want to upgrade the lights on. Should I use obs or do you recommend another brand. I kinda want something that bolts right up because I tend to break things that need to much modification. Lol
Only lights that will fit the like OEM is a set of NOS ones from ford. I think most aftermarkets will require some mods to fit.
@@CPsGarage ok thanks
What bumper is that and dose it give you better gas mileage?
17-19 super duty. Doesn't make a difference in fuel economy
Beautiful!
Thank you
@@CPsGarage my 14 year old daughter is rebuilding her 95 f250 7.3 and I think I’m gonna get a set for her !
@@roosterscruiser nice! Love seeing the younger generation into these older trucks. I think the lights look pretty cool. I think what sets them off is the bumper front he 17- and up trucks. This guy on RUclips call blowing diesel sells bumper bracket kits to install the newer bumpers.
Where did you get the headlights
eBay. The link I used is in the description
I need your help i try to do the same on my 1996 f250 i install those blinkers it switch the color but dont flash like suppose, that i missing something??????
You'll either need resistors or a LED compatible flasher. Personally I'd find a flasher as it's easier to change.
Will these fit 93 bronco? Are they still working ok? They look killer!
They would.
Where did you find your drl module...ive searched and can't find one
Rockauto sells aftermarket ones. The bracket is the hardest thing to find. I found mine on eBay.
@CP's Garage do you know what vehicle specifically it's made for (year and model)
I found it...thanks
I'm also looking for the module and can't find one with exact part number, any advice? I've found very similar part numbers but not exact
You started a new obs channel
It won't be just OBS but it will definitely have a lot of it. I plan on having more older fords like the Fox and SN on as well. Who knows what else will show up.
Florida OSHA approved footwear.
Yes sir. It's way to hot for shoes lol
Would it be okay to run the C ring lights and the fog lights with the same wire? I have the same bumper and it has the fog lights but i also want the fog lights to be running as daylight
If you used a relay. I personally wouldn't run fogs and running lights on that circuit. Relays use alot less amps and I personally don't know what kinda power the DRL module can put out.
Great job on the OBS. Question, I see that you have some wheels that I would love on my OBS. What did you have to do to get those on?
05 and up super duty axle. Came off of a 06 king ranch truck
Do you happen to have a video of that swap?
@@rubenguerrajr5833 I do not. That was before I started RUclips but I may do a video. I'm thinking about getting a different set of brackets from my man Blowing diesel.
So the don’t actually have a switch back
Nope
What’s that bumper off of? I have a 04 Harley and would it be easy to bolt on that bumper
It's a 2017. No it wouldn't bolt on. The 11-16 bumper would be the closest to fitting you're truck. You still would have to modify it to fit. There are places that sells the adapter brackets.
@@CPsGarage thank you CP
You're welcome!
I bought some orangeade led drl cbar headlights like these and I wired them in but they don’t turn on do I need to buy the separate module if so why didn’t the seller or any seller for that means have a description on what you need for the lights I feel like all the things I needed for it to work should’ve just came in the box
You should only need a 12v source to get them to work. I only used the module to run them like the factory DRL's. A keyed 12v would be just fine.
Where can we purchase the lights?
eBay
@@CPsGarage thanks. Do you know the name? I'm searching but can't find them
@@heychrisallen9316 link to the ones I bought is in the description. I hear they may also be sold out.
Nice vid, you guys work together?
Ray or Powerstroke tech talk with Arod? We all do Livestreams together on Wednesday nights on PTT channel.
Dang I am so confused with you you should like come put mine in for me lol
If you're in Florida drop it off
you can clean them... for starters... that's oxidation on the plastic 🎂
I've cleaned them up 3 times already. The inside of the lens was just as bad as the outside. The Florida sun kills headlights quickly
Fun
All thar to put some headlights in that literally supposed to fit the truck smh
Just like anything afterwards it never fits right
@@CPsGarage I just got mine in and didn't realize they came in three pieces I might attempt it tomorrow idk why they don't make it simple with wiring and all that
Ray sendt me.
Ray is the man!
Hey, sir. Appreciate your dedication and effort on the video. We just reached out to you via email for inquiring an opportunity of collaboration, hope hear from you soon.
I will check it out
Anybody that puts that Kind of malarkey in a truck !!
Has got too much money and a lack of neurological functioning and would definitely buy property on Mars.. .
Where you at in Florida? Dm me on Instagram. I have an obs I am trying to get back on the road, I have a couple questions maybe you can answer
Sent.. you can also email me. My email is in the about section.