That test panel looks GREAT!! For $180 paint gun it works fantastic. I sold a brand new never used Sagola & Tekna Pro Lite because I can't do that type of work anymore. If I could, I'd buy one (or two) of these HF Black Widow HTE's. Thank you for the video.
wow, I'm a fan of several painting channels and those guys are really good at the trade. I must say what you said comparing the guns was so to the point and interesting that I was impressed. When you did the edges I thought to myself why is he doing that and then you said the same thing! I can't wait to see episodes 2 and 3. is a difference to the early version???
Great video I learned a lot but if you might have the time I have a question that the HF folks cannot answer. Where can we purchase spray tips with different flow rates? I asked but they can't answer so I didn't buy it. Thank you and have a great New Year.
Harbor Freight only had 2 tip sizes for their BlackWidows, it’s the 1.3 and a 1.7, the HTE has the 1.3 and the HVLL has the 1.7 tip. Sadly in their line, that’s all they offer. Most major brands have all sizes, just not Harbor Freight. I hope this helps.
@@Shododaanthe hvlp version has a 1.7 and 1.4 set up while the HTE has a 1.3 but I'm not sure if there actually another nozzle set up because on its spare part list it only has a 1.5 needle but no mention of a nozzle or air cap with it
They do have spare parts, I just went and pulled up the manual from HF, on Page 19 is the spare parts and its parts numbers. I hope this helps. Normally you do have to call Customer Service to other the spare parts. I've done it will the old style gun!
all the knock off Chinese guns use pretty much the same nosel and cap they are just different to match the gun they make a gun for $20 which sprays really good, im a auto refinisher (spray painter) have been for 45 years and I been using them for 5 years, I have 15 guns 10 that are Chinese to get a really good 2k clear with no peal you really need a branded gun the Chinese guns are great for primer and base, their pretty good for acrylic's but they spray heavy in the center of the flow patten once you know that you can adjust the fan to suit
And that fine . Because most of the China guns I've used perform better then gti gun anyways . Gti is way overpriced. This at least give us smaller shop guys a chance to make money in the trade .
Great review bro, the fender is looking real good 💯
upk! whatch you doing over here? lol
@@rob12449 watching my bro Bamabuildz review lol💯
UPK!! Yours were the first videos I saw. Got a good LVLP setup at home thanks to you. Now bama is hooking me up with a decent gun at the shop 😂
@@ianirwin1237 nice 💯 glad to hear it’s working out for you 💪🏾
I hope you continue to make content brother, really enjoyed it. The gun looks like it sprays well ready to try mine.
That test panel looks GREAT!! For $180 paint gun it works fantastic. I sold a brand new never used Sagola & Tekna Pro Lite because I can't do that type of work anymore. If I could, I'd buy one (or two) of these HF Black Widow HTE's. Thank you for the video.
I agree!
Looks like it sprayed nice…. Good review
Looks like a well built guns
What in the ! That 22mm style tip looks identical to my DV1
Will the devilbiss needle and tip fit the new black widow? Would like to find a 1.2 needle and cap that will fit the black widow
Can u use the dv1 nosel with the black widow 2.0 ?
Which size tips does hte come with?
1.3 which is the most common tip size for Sealer, Base and Clear coat.
Did the fitting fit those cups you were using? Or did you get a different adapter. Which ML cup was that
wow, I'm a fan of several painting channels and those guys are really good at the trade. I must say what you said comparing the guns was so to the point and interesting that I was impressed. When you did the edges I thought to myself why is he doing that and then you said the same thing! I can't wait to see episodes 2 and 3. is a difference to the early version???
Yes, Much easier to clean and has a very large fan!
Any way to remove the swivel on bottom?
Yeah very very smooth no crunchy 😂😂
looks good what paint code is this color ? i like it
Toyota 4U2
Great video I learned a lot but if you might have the time I have a question that the HF folks cannot answer. Where can we purchase spray tips with different flow rates? I asked but they can't answer so I didn't buy it. Thank you and have a great New Year.
Harbor Freight only had 2 tip sizes for their BlackWidows, it’s the 1.3 and a 1.7, the HTE has the 1.3 and the HVLL has the 1.7 tip. Sadly in their line, that’s all they offer. Most major brands have all sizes, just not Harbor Freight. I hope this helps.
Thank you for the quick reply@@luxe-kustoms
@@Shododaanthe hvlp version has a 1.7 and 1.4 set up while the HTE has a 1.3 but I'm not sure if there actually another nozzle set up because on its spare part list it only has a 1.5 needle but no mention of a nozzle or air cap with it
Ive been told more tips are coming for the new guns. @@luxe-kustoms
I am returning mine no repair parts and they do have small upgrade parts.
They do have spare parts, I just went and pulled up the manual from HF, on Page 19 is the spare parts and its parts numbers. I hope this helps. Normally you do have to call Customer Service to other the spare parts. I've done it will the old style gun!
Nice hat Bro
What clear are you using?
he said what it was at @14:23 It's a Sherwin Williams high solids clear.
My only complaint about this gun is there is no rebuild kit available for the gun unless someone knows something I don't
Have to go to their site or contact support
@@DayDay_Suave I'm actually getting ready to invest in the 3M performance spray gun with the interchangeable nozzles
@@rongamble9884waste of money
what air regulator are you using for the gun?
Mostly Walcom Carbon Digital Regulator
all the knock off Chinese guns use pretty much the same nosel and cap they are just different to match the gun they make a gun for $20 which sprays really good, im a auto refinisher (spray painter) have been for 45 years and I been using them for 5 years, I have 15 guns 10 that are Chinese to get a really good 2k clear with no peal you really need a branded gun the Chinese guns are great for primer and base, their pretty good for acrylic's but they spray heavy in the center of the flow patten once you know that you can adjust the fan to suit
❤❤❤
Looks like the $99 Devilbiss Gti china clone I got off eBay.
Maybe could you test a spray gun from new brand PORPHIS? I saw it on Ins but I would like to know more about the performance. Thanks!
I will see if i can get one to try.
Hi
Good comparison but you clear coated over orange peel so you cant fully judge the gun as far as orange peel.
Looks like all they did was make an over priced gti pro lite knock off
And that fine . Because most of the China guns I've used perform better then gti gun anyways . Gti is way overpriced. This at least give us smaller shop guys a chance to make money in the trade .