Ich sehe es genauso wie Mattias. Bin gerade selber dabei ein 8 Meter langes, holländisches Stahlboot zu restaurieren. Es ist eine sau Arbeit. Zwei Schritte vor und drei zurück. Aber ich bleibe dran. Dank deinen Videos habe ich schon den ein oder anderen Tip in mein Projekt einfließen lassen. Weiter so bitte. Ich bin gespannt wie es weitergeht.
Patching the holes like that will last decades if you maintain the boat properly. Nothing wrong with what you have done. They are not structural. Good job.
Not sure if that will last for decades, but at least it should last long enough to address the essential issues, live in the boat, enjoy it some time... As you mentioned, those rusty parts are not structural parts, so no worry.
@@gillesgomez3091 it is perfect you can repair structural areas on aircraft wing like that and it's fine assuming long as you move to a new country within a couple of years to avoid "legal issues" later
Man there is always gonna be negative comments when it comes to people being jealous of that beautiful piece of steel, just keep trucking and do what you can with what you have.
I'm addicted to U/tube and find interesting people daily but every now and then I find Gold. Two weeks ago I found you. I love your work and and your humour. I have a soft spot for boats and Germany where I spent a month backpacking in 2000. I look forward to the rest of your interesting work. Greetings from Aussie.
Waiting to for next winter Sir. is your best bet, Temp repairs, Good for now , I agree stay on schedule to get the boat ready for the water, and all hull repairs and issues address good to go !
10/10 for vids and work you are doing!!!! "Done" is often FAR BETTER than perfect. Many of your "temporary fix's" are good for the duration of your ownership of this vessel. Only do future repairs as they become problems again as this boat is very over-built by today's standards. Some yrs ago I did a similar project. Initially I made a mistake of trying to restore things back to the original design, making some tasks much more complex and harder than necessary. Eventually I came to realize changing the design could be far more efficient. Eg #1: On the lower area of the windshield, Don't cut out metal and replace it to make it look like original sheet goods. Consider cutting out the 'T' stock, weld in a 3" high band of 3/32" metal across the entire bottom edge. #2: Outside - If a series of rust areas show to the outside in a line, consider adding a wide(ish) strip of metal overtop everything as a 'belt-line' across an entire face/wall. Slightly new look, done in 1/2 the time. Many of your "temporary fix's" are good for the duration of your ownership of this vessel. Only do future repairs as they become problems again as this boat is very over-built by today's standards. Get yourself some better tools. A light duty but commercial level MIG welder (higher duty cycle for more continuous welds) and a good random orbit sander will increase your productivity tenfold.
You my friend have a great sense of humor. don't listen to the negative comments, it's your project and your money. Your budget will predict the speed of it all. Try not to put too many deadlines in place. It will be done when it's done.
"Two weeks until water." I guess that means you plan on doing the rest of the interior work after launching? I admire your tenacity & appreciate your hard work, your boat is a beauty & deserves all the love You're giving her, great job! Just imagine how much this project would've cost if you didn't know how to weld!?! Oh my!
Your right, it's your boat you have the last say. For someone who is not a professional, you have a lot of determination and that makes a lot of difference. I'm looking forward the finish, good luck with your ideas 😊.
Sending you a coffee. You're videos have saved me soooo much money 💰💸. I was going to buy a very similar boat but now I have seen just how much work it would be, I've decided not to! Good luck man 👍 I'm confident you will finish.
You are doing a great job. I love your series! In the future you should probably move the diesel heater exhaust below the heater. They tend to trap moisture in the pipe and it will have issues. I learned this the hard way. :)
Don't pay attentions to the haters. This is your boat and project. You do it how you want. If someone doesn't like it, they can get their own project. Then they can put it on RUclips and have the haters comment on their videos. Just keep doing what you want.
I too have to say, don’t worry that much about those fixes. You covered them acceptably. A mistake would be covering them again and forgetting them for years! All those perfectionists have fixing boats as a hobby. You (and me too) are working hard to bring this boat on the water and enjoy boating. Then, a bit of "controlled rush" is totally acceptable :) Good luck there!!!!!
Your doing a great job, here in Ireland we say “He who pays the fiddler, calls the tune” it’s your boat, so you do it your way 👍 one tip, please ensure when mounting the fuel pumps for the diesel heaters, that you mount them in an insulated suspended way, they’re renowned for being very very noisy, it’s the clatter from the solenoids inside, ‘click, click’ will drive you crazy. 😃👍
if you ever dock in Norway during the winter you should be plenty warm enough in below freezing weather also recommend pipe warming heaters for your sink drains and your gray water outlet.
Nothing wrong with giving it a temporary fix! nothing at all. If you plan on doing it right later on that your decision and it really no bodies business. Totally respect that bud. Looks fine for a temporary work.
I learned many years ago that a very real definition of "boat" is a hole in the water into which you pour a lot of money. Looks like you are doing a great job.
G'day Crew,, Great to see all the progress ,im sure you will make a cosy home of the boat . Good luck with the donations ,, living on a budget isnt easy at times,,but you will be fine im sure . Respect from Down Under
Hi. I found this video series yesterday. And bingewatch everything. Lovely videos. Looking forward to many more episodes. Looking forward to see the boat on the water. Keep up the good work 👍
I like watching your videos I hope you keep them up they're really interesting I enjoy watching them and don't worry about whatever anybody else thinks it's your boat
@@crustycurmudgeon2182 That's not what he was saying - you put clear tape over the bit of cardboard that touches the bog, so it leaves a mirror finish. The actual patch can be applied with much better tape.
I strongly agree with the idea of getting rid off the ugly orange paint. Now is becoming yatch-ty looking. Super nice. I am sure you will get more sponsors than needed.
Make sure you ventilate the Helm-room very very good! That is why there is rust in all the corners. Good thing you keep the diesel-heater. In colder weather conditions you should use it a lot to give damp and moisture no chance. A big problem with living in steel ships in colder temperatures. Ventilate, ventilate, ventilate. Keep up your good work. Love yr vid’s!! 👍
Nice Job You are doing... Here is a pro tip,,, Tack weld your project first, it will allow you to test fit all your different components together, then once everything fits as it should then weld up. Tack welds are easier to cut apart than a complete weld joint.... i learned the hard way 40 years ago...
Another video of amzing work on your boat. I am always of the mind that if it's your boat, and you have a deadline to get her in the water, then you have to do what you need to do to make her as good as possible to reach that deadline. I am also worrying that you only have 2 weeks until splash, but you haven't even touched the outer hull of the boat. I just hope that there aren't any major problems below the waterline. Keep up the good work. Best regards from bonnie Scotland.
good work. keep up with the videos. I quite enjoy them and I do understand about doing a boat restoration in phases. U may not know that but BOAT stands for Break Out Another Thousand. There massive money pits.
What's funny is if your like me. 6 years from now you'll be saying. Wow I think next year I'm gonna fix those holes I glass fibered over. lol. I think your doing a great job. It takes a lot of courage to take on a project of this scale! GOOD JOB..
I really enjoy watching your videos. I can feel your pain with the work but just think of the pleasure of the motoring when ready. I am very impressed with your ability to get on and find solutions and use equipment and tools. Well done. Please keep up the videos and commentary. Brill.
Got to get it on the water so you can enjoy it ! Hopefully your temporary fixes will last the season !! The helm and cabins are a "blank canvas" ! Start dreaming of what you want to do this coming fall/winter/spring !
Thanks for the video 👍🏻hope this comment is long enough to help with youtube algorithm? Great work would love to donate but unfortunately I am struggling to keep my boat project going. Totally agree with the work you are doing and feel your pain on budget restrictions. Think the temporary fix will last a long time and these are necessary decisions or you will be in the boat yard for years and I am sure thats not why you bought a boat. Good luck 🤞👍🏻👏⛵⚓🏴
A good rust encapsulator and your fiberglass paste will work for years! The preparation is exactly like you did, remove the scale remove as much of the rust as you can, put on the rust encapsulator and then you can use your paste, prime and paint and it will last for years
Don’t worry about any negative comments. It’s your stew you season it how you like it, they don’t have to watch you cook it or eat it let alone join in.
The clean white look is much much better esthetically that that ugly red. I always like the classic boat look of white paint and polished wood. It has a timeless appeal.
Can't wait for the next video to drop. Once lockdown here in Ireland lifts, I have to do battle with rust on our boat (11m kotter). Your videos have helped dispel my fear and hesitancy. Also: I agree with Owen, focus on the exterior now. The interior can be done after you are in the water. And that way we can see more footage of you painting ;-).
Great progress Bro and your right your Boat your video! You are doing what you got to do to get it ready for the water I can tell it will not be forgotten, address it later and i have been watching since the beginning I solute you for the job you have done! Cheers'
I like your video, the project is something I would have never thought of. One slightly negative comment is that you didn't seem to have a plan of attack in the first place. In the past you cleared places, carried out some repairs and painted then later did another job which messed up the paint so having to touch up. I think we are all with you on this and are really looking forwards to the completion. Even after that there'll be things to do. And you will have the satisfaction that you did it all. Oh! And yes a big hole in the bank balance!!
I agree with you the rust will have to wait till next year as once you start it will take ages to do it right. You have to do it right as it’s so tight so don’t rush. Your boat your time 👍 Not sure about exhaust it looks ok but if you have a thin bit and start the engine for some time it could blow a hole then you will have fumes inside your living area. Be careful 👍
Great way to fix up the rust holes until you want to cut out the steel and do a more permanent fix..... :) Keep up the great work mate, your doing an awesome job.....
Ich sehe es genauso wie Mattias. Bin gerade selber dabei ein 8 Meter langes, holländisches Stahlboot zu restaurieren. Es ist eine sau Arbeit. Zwei Schritte vor und drei zurück. Aber ich bleibe dran. Dank deinen Videos habe ich schon den ein oder anderen Tip in mein Projekt einfließen lassen. Weiter so bitte. Ich bin gespannt wie es weitergeht.
Life is a balance of hundreds of things, time and money are just two.... the temporary fix is a good compromise! Thanks for sharing!
Patching the holes like that will last decades if you maintain the boat properly. Nothing wrong with what you have done. They are not structural. Good job.
Not sure if that will last for decades, but at least it should last long enough to address the essential issues, live in the boat, enjoy it some time... As you mentioned, those rusty parts are not structural parts, so no worry.
If they are preped good and painted over, it should be no problem
It's the good old classic car body shop repair. As long as no moisture or oxygen can't get to it, this is like nothing ever happened.
@@gillesgomez3091 it is perfect you can repair structural areas on aircraft wing like that and it's fine assuming long as you move to a new country within a couple of years to avoid "legal issues" later
Ignore haters and never comment what they say. 99% of us love your videos! ❤️
Man there is always gonna be negative comments when it comes to people being jealous of that beautiful piece of steel, just keep trucking and do what you can with what you have.
I'm addicted to U/tube and find interesting people daily but every now and then I find Gold.
Two weeks ago I found you. I love your work and and your humour.
I have a soft spot for boats and Germany where I spent a month backpacking in 2000.
I look forward to the rest of your interesting work. Greetings from Aussie.
I feel your temporary fixes are more than acceptable. Nice work. Enjoy
Waiting to for next winter Sir. is your best bet, Temp repairs, Good for now , I agree stay on schedule to get the boat ready for the water, and all hull repairs and issues address good to go !
"Pretend nothing ever happened" 🤣🤣🤣, I bet some people were screaming when you said that!?
i laughed hard as hell!
10/10 for vids and work you are doing!!!!
"Done" is often FAR BETTER than perfect. Many of your "temporary fix's" are good for the duration of your ownership of this vessel. Only do future repairs as they become problems again as this boat is very over-built by today's standards.
Some yrs ago I did a similar project. Initially I made a mistake of trying to restore things back to the original design, making some tasks much more complex and harder than necessary. Eventually I came to realize changing the design could be far more efficient. Eg #1: On the lower area of the windshield, Don't cut out metal and replace it to make it look like original sheet goods. Consider cutting out the 'T' stock, weld in a 3" high band of 3/32" metal across the entire bottom edge. #2: Outside - If a series of rust areas show to the outside in a line, consider adding a wide(ish) strip of metal overtop everything as a 'belt-line' across an entire face/wall. Slightly new look, done in 1/2 the time.
Many of your "temporary fix's" are good for the duration of your ownership of this vessel. Only do future repairs as they become problems again as this boat is very over-built by today's standards.
Get yourself some better tools. A light duty but commercial level MIG welder (higher duty cycle for more continuous welds) and a good random orbit sander will increase your productivity tenfold.
You my friend have a great sense of humor. don't listen to the negative comments, it's your project and your money. Your budget will predict the speed of it all. Try not to put too many deadlines in place. It will be done when it's done.
Thanks for sharinng this massive project with us.
Love your channel! Yes sir they cost a lot of money. “BOAT” Bring on another thousand!
"Two weeks until water." I guess that means you plan on doing the rest of the interior work after launching? I admire your tenacity & appreciate your hard work, your boat is a beauty & deserves all the love You're giving her, great job! Just imagine how much this project would've cost if you didn't know how to weld!?! Oh my!
Your right, it's your boat you have the last say. For someone who is not a professional, you have a lot of determination and that makes a lot of difference. I'm looking forward the finish, good luck with your ideas 😊.
Sending you a coffee. You're videos have saved me soooo much money 💰💸. I was going to buy a very similar boat but now I have seen just how much work it would be, I've decided not to! Good luck man 👍 I'm confident you will finish.
You are doing a great job. I love your series! In the future you should probably move the diesel heater exhaust below the heater. They tend to trap moisture in the pipe and it will have issues. I learned this the hard way. :)
Great fixes, don’t forget to re-route the waterflow from the helm roof, the pipes you removed diverted the water from your roof.
I love your sense of humor, irony and sarcasm. Keep up the good work and ignore the may-sakers. Go go go 👍
Don't pay attentions to the haters. This is your boat and project. You do it how you want. If someone doesn't like it, they can get their own project. Then they can put it on RUclips and have the haters comment on their videos. Just keep doing what you want.
I love your videos! You have a great sense of humor. I hope you ignore any of those negative comments.
Your doing a great job, so much progress in 27 weeks.. Thanks for sharing
I too have to say, don’t worry that much about those fixes. You covered them acceptably. A mistake would be covering them again and forgetting them for years! All those perfectionists have fixing boats as a hobby. You (and me too) are working hard to bring this boat on the water and enjoy boating. Then, a bit of "controlled rush" is totally acceptable :) Good luck there!!!!!
Economics always dictates progress, so you get the job done how you see fit. Challenging work mate, well done.
Great job finding ways to overcome obstacles!!
Love your sense of humor and videos. Do not give up and keep the faith this good looking boat will be your home soon. I'm a fan from Delaware USA.
Your boat, your rules.
Looking great, just do what can when you can! Look at the big picture, it will come together!
Looks good. It's important no water is entering again. I buy you a coffee!
Your doing a great job, here in Ireland we say “He who pays the fiddler, calls the tune” it’s your boat, so you do it your way 👍 one tip, please ensure when mounting the fuel pumps for the diesel heaters, that you mount them in an insulated suspended way, they’re renowned for being very very noisy, it’s the clatter from the solenoids inside, ‘click, click’ will drive you crazy. 😃👍
I think the inscription says "gat voor wastafels" that's Dutch. It means hole for the sinks. Love the work you are doing 👌
"Get four waffles!"
Ja, das stimmt. "Gat voor wastafels" ist Niederländisch und heißt genau dies: Loch für Waschbecken (Mehrzahl).
Exactly spot on!
Temporary repairs are the ones that last longest. Provisorium hält am längsten!😂😂😂
Love your vlog brother I don't miss one keep up the good work 💪# 💯
You can always go back and do things.
Looking great.
if you ever dock in Norway during the winter you should be plenty warm enough in below freezing weather also recommend pipe warming heaters for your sink drains and your gray water outlet.
Nothing wrong with giving it a temporary fix! nothing at all. If you plan on doing it right later on that your decision and it really no bodies business. Totally respect that bud. Looks fine for a temporary work.
thank you for your informative videos.. the hater is always be there.. but we just here to protect your channel...
BOAT: Bust Out Another Thousand
Great build, your channel is very inspiring.
I learned many years ago that a very real definition of "boat" is a hole in the water into which you pour a lot of money. Looks like you are doing a great job.
you and me both lol
BreakOutAnotherThousand$
G'day Crew,,
Great to see all the progress ,im sure you will make a cosy home of the boat .
Good luck with the donations ,, living on a budget isnt easy at times,,but you will be fine im sure .
Respect
from
Down Under
BTW your sheer tenacity and workload in such a short time gets my sub👍
The bead you layed down on the roof when installing the three by three patch. Was just outstanding.
Hi. I found this video series yesterday. And bingewatch everything. Lovely videos. Looking forward to many more episodes. Looking forward to see the boat on the water. Keep up the good work 👍
Much respect ! You are getting lots done! It is always the trick to choose your sort cuts and live with the results. Perfect is the Enemy of Done!
I like watching your videos I hope you keep them up they're really interesting I enjoy watching them and don't worry about whatever anybody else thinks it's your boat
Truly brilliant fix on the console. Just keep swimming.
I think you are doing a great job. Forget the negative comments, you have transformed the interior. Love your channel.
Owatrol should sponsor your channel!!!
Dude! If I was in your area, you'd have some volunteer labour.
You, Sir, possess the perfect name for the job.
tip: if you put some clear tape over the cardboard it will peel away very easily
Yes-- too easily. It only sticks well to cardboard. Gravity, alone, will detach it from virtually any other surface (other than glass).
@@crustycurmudgeon2182 That's not what he was saying - you put clear tape over the bit of cardboard that touches the bog, so it leaves a mirror finish.
The actual patch can be applied with much better tape.
@@dnomyarnostaw Ahh! Yes, of course. Pardon my senile moment...
I strongly agree with the idea of getting rid off the ugly orange paint. Now is becoming yatch-ty looking. Super nice. I am sure you will get more sponsors than needed.
Make sure you ventilate the Helm-room very very good! That is why there is rust in all the corners. Good thing you keep the diesel-heater. In colder weather conditions you should use it a lot to give damp and moisture no chance. A big problem with living in steel ships in colder temperatures. Ventilate, ventilate, ventilate.
Keep up your good work. Love yr vid’s!! 👍
OMG what a lot of work / BUT I have to say everything is looking real nice. I have to give you ten thousand points .
Nice work again. You're doing a outstanding job.
Nice Job You are doing... Here is a pro tip,,, Tack weld your project first, it will allow you to test fit all your different components together, then once everything fits as it should then weld up. Tack welds are easier to cut apart than a complete weld joint.... i learned the hard way 40 years ago...
Another video of amzing work on your boat. I am always of the mind that if it's your boat, and you have a deadline to get her in the water, then you have to do what you need to do to make her as good as possible to reach that deadline.
I am also worrying that you only have 2 weeks until splash, but you haven't even touched the outer hull of the boat. I just hope that there aren't any major problems below the waterline.
Keep up the good work.
Best regards from bonnie Scotland.
Schöne Grüße nach Berlin und viel Erfolg mit dein Projekt.
Really LOVE and appreciate your music!!! Good Job on the boat, too!!
Beautiful boat. And great work! Both the practical and media!
good work. keep up with the videos. I quite enjoy them and I do understand about doing a boat restoration in phases. U may not know that but BOAT stands for Break Out Another Thousand. There massive money pits.
I wait every day anxiously for more videos. 😊
Its Your Boat my man Im not complaing your doing a outstanding job , I will just sit here and Pretend noting happend LOL
excellent work fella, keep up the good work.
What's funny is if your like me. 6 years from now you'll be saying. Wow I think next year I'm gonna fix those holes I glass fibered over. lol. I think your doing a great job. It takes a lot of courage to take on a project of this scale! GOOD JOB..
I really enjoy watching your videos. I can feel your pain with the work but just think of the pleasure of the motoring when ready. I am very impressed with your ability to get on and find solutions and use equipment and tools. Well done.
Please keep up the videos and commentary. Brill.
Got to get it on the water so you can enjoy it ! Hopefully your temporary fixes will last the season !!
The helm and cabins are a "blank canvas" ! Start dreaming of what you want to do this coming fall/winter/spring !
you are doing one hell of a job keep it up would love to see the end product
Thanks for the video 👍🏻hope this comment is long enough to help with youtube algorithm? Great work would love to donate but unfortunately I am struggling to keep my boat project going. Totally agree with the work you are doing and feel your pain on budget restrictions. Think the temporary fix will last a long time and these are necessary decisions or you will be in the boat yard for years and I am sure thats not why you bought a boat. Good luck 🤞👍🏻👏⛵⚓🏴
Your boat your choice great work
LOOKS DAMN GOOD‼️. Best thing about a steel boat is it’s easily repaired. I like what you are doing, GOOD LUCK GUYS ‼️👍👍. Vinny 🇺🇸
Great video. You're doing great. Don't listen to all the negative comments. Until they've walked in your shoes, tell them to go scratch.
A good rust encapsulator and your fiberglass paste will work for years! The preparation is exactly like you did, remove the scale remove as much of the rust as you can, put on the rust encapsulator and then you can use your paste, prime and paint and it will last for years
will it sink ? no " so pretend it never happened" agreed ! great video as per usual ..good progress, keep going !
Don’t worry about any negative comments. It’s your stew you season it how you like it, they don’t have to watch you cook it or eat it let alone join in.
“And there you go problem solved!” 😳😝
“and we pretend nothing ever happened”😬
The clean white look is much much better esthetically that that ugly red. I always like the classic boat look of white paint and polished wood. It has a timeless appeal.
I love what you are doing here, excellent….
Great restoration. Enjoy your videos.
Can't wait for the next video to drop. Once lockdown here in Ireland lifts, I have to do battle with rust on our boat (11m kotter). Your videos have helped dispel my fear and hesitancy. Also: I agree with Owen, focus on the exterior now. The interior can be done after you are in the water. And that way we can see more footage of you painting ;-).
I think you are doing a fantastic job, there’s no way I could ever do what you are doing....loving it.
Anderson from Trinidad and Tobago
I think your work is awesome.
Lots of work,but you’re doing a great job.
Strong work!! Amazing progress! I hope your adventures bring you to Canada!!
Great progress Bro and your right your Boat your video! You are doing what you got to do to get it ready for the water I can tell it will not be forgotten, address it later and i have been watching since the beginning I solute you for the job you have done! Cheers'
Really nice looking boat
Well done, superb job done properly, so that it doesn't rust again ... !! you are meticulous and that's very good, this boat will be very pretty ...
I like your video, the project is something I would have never thought of. One slightly negative comment is that you didn't seem to have a plan of attack in the first place. In the past you cleared places, carried out some repairs and painted then later did another job which messed up the paint so having to touch up.
I think we are all with you on this and are really looking forwards to the completion. Even after that there'll be things to do. And you will have the satisfaction that you did it all. Oh! And yes a big hole in the bank balance!!
Hope you remember where all those repairs are next year
I think he did some videos to remember 😃
I too work on boats, but you make it look so easy.
Watching here again from philippines
You the right choice on the Forward cabin plus Anybody who’s ever dry docked a boat should know how expensive that gets and you have to get in and out
I agree with you the rust will have to wait till next year as once you start it will take ages to do it right. You have to do it right as it’s so tight so don’t rush. Your boat your time 👍
Not sure about exhaust it looks ok but if you have a thin bit and start the engine for some time it could blow a hole then you will have fumes inside your living area. Be careful 👍
Great video. Really looks beautiful. Well done ! Sending regards from Australia
Great work
you need to get a needle gun for the rust.
Great way to fix up the rust holes until you want to cut out the steel and do a more permanent fix..... :)
Keep up the great work mate, your doing an awesome job.....
You amaze me with your skills...is your background engineering? I also enjoy your commentary that explains the "why" of some of the things you do.
Those heaters are great, you can build a manifold and turn the exhaust into a radiators
You really spoiled us with that painting sequence this week. 😆
The consoles look fantastic
As long as she stays above water you did your job.