I have a commercial Honda HRC 2163HXA that I got in 2014. I’m wanting to replace the plate set product number 25010 - VD 6-900 in the transmission I am wondering what kind of job that would be to get inside the transmission and replace this part? That’s what cost me about $70 for this part compared to $700 to replace the whole transmission. Just wondering if you have any videos on transmission overhauls, like this one
I don’t run that type of mower, sorry I can’t help. I usually just replace the entire part because they are cheap on homeowner models. Hope you can find a resource for your question. For push mowers I run the homeowner models because the price is cheap to buy and repair. When they start getting worn out after 5-10 years I can sell them for 100 and get a new one for under $600.
Good video. But I Would NEVER Work on any piece of equipment without a thorough cleaning. It was hard to watch as you dug around all of the garbage trash, dirt, etc., to get to these parts.
I’m doing the same exact thing to my HRR216 and was wondering if grease would be ok to use on the new gears or would it just cause dirt and grass buildup? Great video and thank u!
I have a 2018 Honda Mine locks up going forward Locks and stops Could this be transmission… 2020 put a new trans and bushing in under warranty… I agree on tires Three or four sets on this thing … but cuts really good when working Thanks for Video Glenn
Funny that we’re working on renewing the roof at the very same Honda Building located here in Alpharetta as I write. Gonna ask personally if they sell the tranny to walk-in costumers.
Thanks for taking the time to document this procedure.
Clean mower. Grease rear wheel gears. But nice presentation of transmission changeout
What is the snap ring pliers that you use?
I have a commercial Honda HRC 2163HXA that I got in 2014. I’m wanting to replace the plate set product number 25010 - VD 6-900 in the transmission I am wondering what kind of job that would be to get inside the transmission and replace this part? That’s what cost me about $70 for this part compared to $700 to replace the whole transmission. Just wondering if you have any videos on transmission overhauls, like this one
I don’t run that type of mower, sorry I can’t help. I usually just replace the entire part because they are cheap on homeowner models. Hope you can find a resource for your question.
For push mowers I run the homeowner models because the price is cheap to buy and repair. When they start getting worn out after 5-10 years I can sell them for 100 and get a new one for under $600.
Good video. But I Would NEVER Work on any piece of equipment without a thorough cleaning. It was hard to watch as you dug around all of the garbage trash, dirt, etc., to get to these parts.
Where did you order parts from
Honda dealer ?
I’m doing the same exact thing to my HRR216 and was wondering if grease would be ok to use on the new gears or would it just cause dirt and grass buildup? Great video and thank u!
First of all why the hell didn’t you clean a damn thing good mechanics are hard to find and I’m not one of them and it helps if I can see everything
Dónde venden la tracción completa la he buscado y no la encuentro podrías asesorarme
I have a 2018 Honda
Mine locks up going forward
Locks and stops
Could this be transmission… 2020 put a new trans and bushing in under warranty…
I agree on tires
Three or four sets on this thing … but cuts really good when working
Thanks for Video
Glenn
My front wheel didn’t have that leaf in it. Think I should contact Honda? 🤪 Good video, thanks.
That mower was extremely dirty and used hard for sure!
Funny that we’re working on renewing the roof at the very same Honda Building located here in Alpharetta as I write. Gonna ask personally if they sell the tranny to walk-in costumers.
Is hru the same?
Thank you so much.❤❤❤❤❤❤❤
Welcome 😊