Acura TSX Super Pro Polyurethane Lower Control Arm Bushings

Поделиться
HTML-код
  • Опубликовано: 6 янв 2025

Комментарии • 33

  • @stevewilson8752
    @stevewilson8752 2 месяца назад

    Hi from Bundaberg Australia 🇦🇺🍹 You can't beat SuperPro Polyurethane Bushings ☺️👍 They'll last the lifetime of the car ! We lose abit of driving/ passenger comfort BUT SuperPro Polyurethane Bushings/Arms make up for it with better Road handling & never have to replace the Bushings (mabe some lube in in 8 years & thats all ) Most people in Aus 🇦🇺 Now turn to SuperPro Polyurethane Bushings over Rubber that wears out & needs replacing a few times during lifetime of the car 🙈👎 Cheers from Bundaberg Australia 🇦🇺🍹🕺

  • @Officially_Lauro_Built
    @Officially_Lauro_Built 2 года назад +3

    A must upgrade on the TSX. Perfect DIY video

  • @tomb427
    @tomb427 Год назад +1

    I did the PCI myself and love them….great video

  • @SoSlow252
    @SoSlow252 2 года назад +1

    Jesus. I was able to push out the inner and compliance bushing with a press. I couldn't get out the shock bushing. Didn't have a socket big enough lol. Gonna try again tomorrow!

  • @HoMiE327
    @HoMiE327 Год назад +1

    I wasn't aware of this until it popped up on my feed... might do this for my TL-S 🤔

  • @Droczastar10378
    @Droczastar10378 2 года назад +1

    Thinking of upgrading to these when the bushings in my TL go out

    • @ua7pyro591
      @ua7pyro591 Год назад

      Do they work on TL?

    • @Droczastar10378
      @Droczastar10378 Год назад

      @@ua7pyro591 they should, tsx and tl lca bushings have the same part numbers

  • @fsocietytsx
    @fsocietytsx 2 года назад +3

    Nice. I just replaced mine but the bolts were all seized to the bushing sleeve.

    • @MrMike8300
      @MrMike8300  2 года назад +2

      You drive in snow? One of few benefit of California is no rust on the cars.

    • @fsocietytsx
      @fsocietytsx 2 года назад

      @@MrMike8300 ye it was winter driven til 2014

  • @scout9012
    @scout9012 2 года назад +1

    How do you remove the inner rubber section of the rear bushing at 1:24 so you can get a saw in there? Seems like the rubber is too thin to get drill bits around it without snapping.

    • @MrMike8300
      @MrMike8300  Год назад

      I drilled some holes in the rubber to get the hack saw in there. Use a bigger drill bit.

  • @Miguel-dl3pp
    @Miguel-dl3pp Год назад

    can you list the part number for all the bushings

  • @rowzswagga1758
    @rowzswagga1758 2 года назад +1

    Where did you order the polyurethane bushing from? I could only find the super pro brand and not the other bushing

  • @paco0222
    @paco0222 2 года назад +1

    What about engine and transmission bushings poly bushings?

    • @MrMike8300
      @MrMike8300  Год назад

      I upgraded the engine mounts to the Innovative Poly mounts 60a

  • @hussbilal
    @hussbilal Год назад

    Thanks, for sharing the video. I’m planning to replace mine. Did you also separate/ remove axle from the rotor.

    • @MrMike8300
      @MrMike8300  Год назад

      @hussbilal you don’t need to remove the axle. Just break the control arm free from the lower ball joint.

  • @GevXander
    @GevXander Год назад

    solid video.

  • @jedrykgomez3298
    @jedrykgomez3298 Год назад

    Where did you get the compliance bushings? Are they sold individually or in pairs?

  • @saitekina_og9271
    @saitekina_og9271 2 года назад +1

    May you please pin the link where you got those bushings please thank you

  • @carlnichols9970
    @carlnichols9970 Год назад +1

    Idk why but i can not find polyurethane compliance bushings for my 05 TSX... Any suggestions??

    • @MrMike8300
      @MrMike8300  Год назад +1

      The ones I used have mixed reviews with some people having them pop out. Mine are fine so far but if they do pop I’m changing to spherical. Your other option is Hard Race which should be better then the OEM bushing. You can get the poly ones here: www.ebay.com/itm/392883065313?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VNO7ohSsT9C&sssrc=2349624&ssuid=7rWF__VETxu&var=&widget_ver=artemis&media=COPY

    • @BonezMatic
      @BonezMatic Год назад

      U know if these will fit in the 2011 arms as well the arms have the same shape tsx 2011

    • @jedrykgomez3298
      @jedrykgomez3298 Год назад

      ​@@MrMike8300 when you order these bushings, is it $42 for both bushings or $42 each one?

  • @Egkbuilt
    @Egkbuilt Год назад

    Where did you get them?

  • @wuzT40
    @wuzT40 Год назад

    Is there alot more vibrantion?

    • @MrMike8300
      @MrMike8300  9 месяцев назад

      There is definately more but not as bad as with 75a or 85a mounts.

  • @dinoc
    @dinoc 2 года назад +4

    what is the downsize for this mod? more vibrations others?

    • @MrMike8300
      @MrMike8300  Год назад +1

      Haven't really felt much difference in NVH due to these. Most of the NVH comes from the motor mounts I upgraded.

  • @geo9019
    @geo9019 Год назад

    Could you send link to bushings??

    • @MrMike8300
      @MrMike8300  Год назад

      superprousa.com/collections/bushings
      They are from Australia. If the parts are back order you may need to wait a few months until they get them back in stock