The fee you charge for the restoration is well worth every nickel! I just did a deep clean and replaced parts as needed and it has taken me close to a week, working on it for about 10 hours per day! I finally got it back together and running smoothly. I am so glad that part is done - now I can really have some fun with it!
Thanks Jen. I watch Marie as well and I have one of her painted machines. She does and awesome job. I have restored a few myself. If I get tripped up with the next one, (a very rusty 128)), I know to reach out. Bob Fowler is mentions you and Marie often. I think that is how I found you both. Have a good one. Stay safe.
This is perfect as i just acquired a 1941 Featherweight & although it appears (on the surface at least) to be in good condition, but before i fire it up & start using her, I'd like to consider having her cleaned & restored. As it's my first machine, i want to keep her as is (unless y'all feel she needs repainted... To my novice eye, she looks great). I will definitely be reaching out to you to start a conversation. Thanks for all of the great information!
Popped over here from Pat Sloan's channel to subscribe and peruse your videos. Looking forward to seeing Pat's Dutchess when it's all done by you and Marie!
I have a tip.. I have recently restored i couple of machines. Just because I had some on hand, but I like the idea us using it, but I like to soak for a short while all the unpainted parts, and I srpay the insides of the machine in lemon scented Lysol, in addition to the usual cleaning.
I’m so happy I found your channel and spent the entire day watching your 221 restoration videos! I purchased a 221 and it should arrive tomorrow and I feel fairly confident now to get in there and clean up an old machine BUT what does make me a little nervous is if I need to rewire the light or connections to motor/pedel. Any chance you’ve got a how to video on that or can point me in the right direction?? Also, if I should encounter nasty screw heads, what source is out there for these tiny screws? Again, super excited and your instructional videos are awesome!
How exciting! I haven’t made a rewire video yet but you can find some good ones on Bob Fowler’s channel. I plan to do one soon, after I finish my series on the 99. You can find replacement screws at the Singer Featherweight shop and sometimes on EBay. If they are not too chewed up I just sand the heads a little to smooth them out and then put them back. As long as you still have some depth to the slot on top they are fine. Good luck with your restoration, let me know if you need help!
@@SewingMachineRehab With your fantastic videos, I DID IT!! I’m so excited and have a fantastic little machine running like a champ! She had been somewhat neglected but once I saw what she needed and I was able to resolve the issue, “Polly from 1952” is running like a champ!! Thank you again for putting this information out there. First time ever working on sewing machines, I could be hooked LOL.
Hi! If you haven’t already you can reach out to me on my website or email me at jen@sewingmachinerehab.com If I didn’t get back to you, try again. Sometimes my site acts a little wonky…
Great informative video! I loved seeing the process with Pat Sloan’s Dutchess. I don’t have a vintage machine (yet!) but am considering a featherweight for travel if I can find a good candidate.
Thank you! It was so much fun to work with Pat and give her the machine she always wanted. I can help you find a machine if you are looking, you can email me at jen@sewingmachinerehab.com and we can talk more!
I have a Featherweight 221- and have been watching your videos to take it apart for cleaning and restoration. I am stuck...literally. I cannot get the screw out of the needle bar. It's currently on day two of soaking with penetrating oil, but I am not sure I am going to get it out. Which also means I cannot take out the thread uptake mechanism (I think that is what it's called). Do you think it's better just to leave it or should I continue to try and get it out? The machine is actually very clean (my guess is that it wasn't used much) but I am sure has been sitting for a very long time. Any suggestions or advice would be appreciated.
Hi! You can always just leave it. The only problem you might run into is if the needle bar height needs adjusting. Have you tried laying it on its hand wheel and using downward pressure while trying to turn the screw? Some people also have success with heating it with a hair dryer as well. What kind of oil are you using?
@@SewingMachineRehab Thank you for the response. I have tried several different angles with no luck. I am going to try using a hair dryer and then maybe getting one of the screwdrivers recommended by the Featherweight Shop. I am using FVP Penetrating Oil.
I know it seems that way but, no. I do work on a lot of Featherweights though! Some makes and models have very little info out there about them so working on them can be a real guessing game!
Do you have featherweigth machines to sell. There are so many out there and I have no idea if they can be restored or not. Do you have any to sell or can you give me suggestions?
Hi! Yes, I do sell them. They sell pretty quickly. If you would like to get on the list you can email me at jen@sewingmachinerehab.com and reserve one…
Hi! If you email me at jen@sewingmachinerehab.com we can start the conversation. If you have a couple of pictures of your machine it helps for you to send them as well. :)
I am trying to save a white featherweight All is going good Except the bobbin wonder is frozen I’ve tried sewing machine oil and kerosene to no avail Any tips??
I haven't purchased a machine yet. Would it be okay to have it shipped directly to you from the person who sells it to me? That would cut down on so many shipping charges.
Hi! Yes, that would be ok, just reach out to me at jen@sewingmachinerehab.com and we could discuss the details further. Smart thinking, shipping charges add up!
![✅[2023] one needle industrial sewing machine restoration](http://i.ytimg.com/vi/b_xMJDduXm4/mqdefault.jpg)
![✅[2023] one needle industrial sewing machine restoration](/img/tr.png)
The fee you charge for the restoration is well worth every nickel! I just did a deep clean and replaced parts as needed and it has taken me close to a week, working on it for about 10 hours per day! I finally got it back together and running smoothly. I am so glad that part is done - now I can really have some fun with it!
Thank you! It is a lot of work! I am so proud of you for getting through the whole process, I hope you enjoy sewing with it!
Thanks Jen. I watch Marie as well and I have one of her painted machines. She does and awesome job. I have restored a few myself. If I get tripped up with the next one, (a very rusty 128)), I know to reach out. Bob Fowler is mentions you and Marie often. I think that is how I found you both. Have a good one. Stay safe.
Thanks for commenting, Marie and Bob are both wonderful people! Good luck with your 128!
This is perfect as i just acquired a 1941 Featherweight & although it appears (on the surface at least) to be in good condition, but before i fire it up & start using her, I'd like to consider having her cleaned & restored. As it's my first machine, i want to keep her as is (unless y'all feel she needs repainted... To my novice eye, she looks great). I will definitely be reaching out to you to start a conversation. Thanks for all of the great information!
Sounds great! Look forward to seeing your machine!
Thank you! for sharing this people not always know about all the work and time spend on them. Nice
You are welcome! I thought it would be helpful...
Popped over here from Pat Sloan's channel to subscribe and peruse your videos. Looking forward to seeing Pat's Dutchess when it's all done by you and Marie!
She looks amazing, can’t wait for Pat to share with everyone! Thank you for popping over!
I have a tip.. I have recently restored i couple of machines. Just because I had some on hand, but I like the idea us using it, but I like to soak for a short while all the unpainted parts, and I srpay the insides of the machine in lemon scented Lysol, in addition to the usual cleaning.
Thanks! I haven’t ever tried that. There are many methods out there, I say if you find something that works and makes you happy then, great!
Great team work with Marie! Will there be pictures of the finished machines that you restore and paint?
Hi! Yes, I am going to work on getting some photos of past projects up on my website. I would like to show off both my painters!
Nice ❤ I will seriously consider this!
Thank you! I always learn lots & have loads of fun watching your awesome productions! Merci beaucoup!
Me too...Hi Jen this is sooo fun and exciting.
Hi! It is fun and exciting! Thanks for saying hello!
I’m so happy I found your channel and spent the entire day watching your 221 restoration videos! I purchased a 221 and it should arrive tomorrow and I feel fairly confident now to get in there and clean up an old machine BUT what does make me a little nervous is if I need to rewire the light or connections to motor/pedel. Any chance you’ve got a how to video on that or can point me in the right direction??
Also, if I should encounter nasty screw heads, what source is out there for these tiny screws?
Again, super excited and your instructional videos are awesome!
How exciting! I haven’t made a rewire video yet but you can find some good ones on Bob Fowler’s channel. I plan to do one soon, after I finish my series on the 99. You can find replacement screws at the Singer Featherweight shop and sometimes on EBay. If they are not too chewed up I just sand the heads a little to smooth them out and then put them back. As long as you still have some depth to the slot on top they are fine. Good luck with your restoration, let me know if you need help!
@@SewingMachineRehab With your fantastic videos, I DID IT!! I’m so excited and have a fantastic little machine running like a champ! She had been somewhat neglected but once I saw what she needed and I was able to resolve the issue, “Polly from 1952” is running like a champ!! Thank you again for putting this information out there. First time ever working on sewing machines, I could be hooked LOL.
I’m really interested in having my featherweight restored and painted
Hi! If you haven’t already you can reach out to me on my website or email me at jen@sewingmachinerehab.com If I didn’t get back to you, try again. Sometimes my site acts a little wonky…
Thank you,.
You are welcome!
Great informative video! I loved seeing the process with Pat Sloan’s Dutchess. I don’t have a vintage machine (yet!) but am considering a featherweight for travel if I can find a good candidate.
Thank you! It was so much fun to work with Pat and give her the machine she always wanted. I can help you find a machine if you are looking, you can email me at jen@sewingmachinerehab.com and we can talk more!
Great info, thank you!
My pleasure!
I have a Featherweight 221- and have been watching your videos to take it apart for cleaning and restoration. I am stuck...literally. I cannot get the screw out of the needle bar. It's currently on day two of soaking with penetrating oil, but I am not sure I am going to get it out. Which also means I cannot take out the thread uptake mechanism (I think that is what it's called). Do you think it's better just to leave it or should I continue to try and get it out? The machine is actually very clean (my guess is that it wasn't used much) but I am sure has been sitting for a very long time. Any suggestions or advice would be appreciated.
Hi! You can always just leave it. The only problem you might run into is if the needle bar height needs adjusting. Have you tried laying it on its hand wheel and using downward pressure while trying to turn the screw? Some people also have success with heating it with a hair dryer as well. What kind of oil are you using?
@@SewingMachineRehab Thank you for the response. I have tried several different angles with no luck. I am going to try using a hair dryer and then maybe getting one of the screwdrivers recommended by the Featherweight Shop. I am using FVP Penetrating Oil.
Thanks for the information
You are welcome!
Unable to view RUclips video from Marie. Says it is private
Marie may have taken the video down, I will check and see if I need to remove the link. Thanks for pointing that out!
Do you only work on Singer Featherweights? Mine is a Regent Deluxe from Delco/GM.
I know it seems that way but, no. I do work on a lot of Featherweights though! Some makes and models have very little info out there about them so working on them can be a real guessing game!
Do you have featherweigth machines to sell. There are so many out there and I have no idea if they can be restored or not. Do you have any to sell or can you give me suggestions?
Hi! Yes, I do sell them. They sell pretty quickly. If you would like to get on the list you can email me at jen@sewingmachinerehab.com and reserve one…
Hi Jen, I am interested in having my Centennial FW restored an painted. How do I reach you?
Hi! If you email me at jen@sewingmachinerehab.com we can start the conversation. If you have a couple of pictures of your machine it helps for you to send them as well. :)
Thanks for the quick response. My name is Wendy btw! I will get some pics and email you on the weekend.
I am trying to save a white featherweight
All is going good
Except the bobbin wonder is frozen
I’ve tried sewing machine oil and kerosene to no avail
Any tips??
Hi! Do you mean it won’s spin or it won’t move up and down? Either way I would be trying Kroil and heat. Hope you get it moving!
My machine is frozen; I can’t turn the turn wheel by hand or the ugh power.
What kind of machine do you have? Email me at jen@sewingmachinerehab.com and send some pictures if you want, I may be able to help!
I haven't purchased a machine yet. Would it be okay to have it shipped directly to you from the person who sells it to me? That would cut down on so many shipping charges.
Hi! Yes, that would be ok, just reach out to me at jen@sewingmachinerehab.com and we could discuss the details further. Smart thinking, shipping charges add up!
Thank you
You're welcome!