Thanks for watching, please feel free to leave a comment on what you liked or disliked. If you're new here and you enjoyed this, please consider subscribing to my channel. If you have been here before, then thank you for your continued support, it means a lot!
Great looking bowl Tim, really love the shaping of this. Must have been mightily frustrating to find the metal interloper, but thankfully didn't distract from the piece. All the best. Ray
Cheers Ray, it was a little disconcerting especially when I saw the chunk it took out of the gouge tip too. Several words were said! Thanks for watching pal!
Wow, who'd have thought a block of wood had that magnificent shape inside it. That ebonising recipe works amazingly well, I'll have to give that a try someday. Cheers Pog, another tour de force.
Hi Pog... Beautiful tri cornered bowl... very well turned... those corners looked scary!!... Loved the home made ebonising solution it worked really well... Shame about the gouge... I thought that it was going to fly off when you did the slo mo...Haha Great video as always... Take care...All the best.....Andy
Nicely done! Ive seen alot of these turned, and always wanted to try one. Hate that the drill bit was there, and caused a bit of a problem. Never know whats gonna be hiding in wood fibers. The ebonizing solution worked well!
Nice one Tim! I must have a go at some more 3 sided stuff. The ebonising solution works great but I have used it on some Oak (well I thought it was Oak) but it didn't ebonise much at all. Not sure if the Tannin disappears as the Oak ages or what. So much to learn! Merry Christmas, Dave
Yeah I'm not too sure on that one. It must leave to some extent right? Cheers Dave, I'd recommend it, lots of fun 😁 Happy Christmas pal, have a good one!
That's a nice one Tim. Too bad you can't burn you're logo in this one. (hmm, you can sand the bottom and the ebonize through your logo template) 👍Frank.
How many people would give the wrong answer if you ask them how many corners a bowl made from a square block of wood will have? Only woodturners are likely to know this. Admittedly I still have a problem myself in reasoning why there are three corners instead of four. Maybe I should make another one myself. 😎
Thanks for watching, please feel free to leave a comment on what you liked or disliked. If you're new here and you enjoyed this, please consider subscribing to my channel. If you have been here before, then thank you for your continued support, it means a lot!
Yet another incredible creation. The grain turned out wonderfully. We are just amazed with the ideas you come up with.
Thank you so much for the support guys, much appreciated 😁
Great looking bowl Tim, really love the shaping of this. Must have been mightily frustrating to find the metal interloper, but thankfully didn't distract from the piece. All the best. Ray
Cheers Ray, it was a little disconcerting especially when I saw the chunk it took out of the gouge tip too. Several words were said! Thanks for watching pal!
Nice Piece, thanks for sharing. Full View and Like 👍
Big thanks Allen, cheers bud!
That looks great! I didn’t see that shape coming, but I like it. Very nice. 👍🏻
Cheers Mike! Thanks for watching buddy, all the best 😊👍
Nice one mate, love that finish and the two tone effect.
Cheers Harki, really enjoyed this one aside from the drill bit! 😂 All the best mate!
Great concept with the tops turned in
Thank you so much! Really enjoyed making this one and love the shapes you can get from starting with a cube.
Very well done. Bad luck finding that piece of drill.. the metal detector pinpointer is useful in those cases!
Thank you so much! Sounds like a good product, I'll check it out, thanks!
Pretty piece, 👍👍👍
Thank you Gao! 😊
Wow, who'd have thought a block of wood had that magnificent shape inside it. That ebonising recipe works amazingly well, I'll have to give that a try someday. Cheers Pog, another tour de force.
Thanks for popping by Mark, always a pleasure 😁
👍👍👍 Nice idea, well done!👏👏👏
Thanks Tazio, glad you liked it! 😃
I like the contrast when you cleaned the rim up me personally I don’t care about turning oak again but it turned out great
Thank you so much! It's not my favourite to work with but I don't mind it so much. Cheers! 😁
Very cool piece Tim...really like the ebonizing ...stay safe...press on 😎 Joe...have a blessed Christmas 🎄🎄🎄👍
Cheers Joe, thanks for stopping by mate! All the best for Christmas and the new year!
C’est une très belle réalisation Tim bravo 👍👏🇨🇭 et joyeuses fêtes 🎄⛄️
Thanks for stopping by Denis! 😁
Hi Pog...
Beautiful tri cornered bowl... very well turned... those corners looked scary!!...
Loved the home made ebonising solution it worked really well...
Shame about the gouge... I thought that it was going to fly off when you did the slo mo...Haha
Great video as always...
Take care...All the best.....Andy
Hi Andy, thank mate! The ebonising stuff worked a treat, I wasn't expecting it to be that good or that fast even!! Thanks for watching, take care!
Awesome work Tim, that is a cool piece
Cheer mate! It's definitely a fun one to make 😃
Very well done my friend lovely piece
Cheers Barry, thanks for watching mate! 😁
Cool love the look thanks for sharing
Thank you for watching and the kind words!
Nicely done 👍
Thanks mate 😁
Beautiful piece Tim! I love the smooth curves and how they contrast the spikey points!
Awesome work all around!
Cheers brother!! I got away with sanding most of this on the lathe without hitting a digit too! 😂 Thanks Seth, all the best mate!
Nicely done! Ive seen alot of these turned, and always wanted to try one. Hate that the drill bit was there, and caused a bit of a problem. Never know whats gonna be hiding in wood fibers. The ebonizing solution worked well!
Yeah, it happens from time to time, thankfully not all that often these days! Thanks for watching, glad you liked it! 😁
Really nice work Tim! Hope you have a great Christmas mate.
Cheers Ian! Have a good one mate! 😁
good looking piece.
that is one thing about getting wood The unknown that larks inside
Too true! Cheers Luie, thanks for watching bud!
@@tfturning *lurks
Very nice work, make sure you count your fingers after that one.
Haha cheers Andy! I made sure to check before, during and after this piece 😂
Nice one Tim! I must have a go at some more 3 sided stuff. The ebonising solution works great but I have used it on some Oak (well I thought it was Oak) but it didn't ebonise much at all. Not sure if the Tannin disappears as the Oak ages or what. So much to learn! Merry Christmas, Dave
Yeah I'm not too sure on that one. It must leave to some extent right? Cheers Dave, I'd recommend it, lots of fun 😁 Happy Christmas pal, have a good one!
Very nice Tim .
I hate hitting metal
Cheers Tommy! Yeah it's horrible, my poor bowl gouge! 😂
Looks good man, like how you left the hole where the pesky drill bit was
Cheers dude! Gotta just roll with it sometimes! 😂
Love it!
Thank you so much Cecilia 😁
That's a nice one Tim. Too bad you can't burn you're logo in this one. (hmm, you can sand the bottom and the ebonize through your logo template)
👍Frank.
Cheers Frank! I didn't consider the logo until it was too late, ah well, I'll work something out I'm sure 😁 Thanks for popping by bud 👍
How many people would give the wrong answer if you ask them how many corners a bowl made from a square block of wood will have?
Only woodturners are likely to know this. Admittedly I still have a problem myself in reasoning why there are three corners instead of four. Maybe I should make another one myself. 😎
Yeah you're right! 😂 Thanks for watching bud!
hey i had to get a new tablet so i had to subscribe again jsut to let you know my friend. chris
Double sub! Lucky me haha cheers Chris, much appreciated buddy! 😃
Ok ok ilike good sir
Thank you so much!
👋👍👍👏🤝👌
🙏🙏😊