DIY CUSTOM REAR SETUP Touring 4WD & Camping STORAGE// FRIDGE BOX & REAR DRAWER // Dual Cab Canopy
HTML-код
- Опубликовано: 30 июн 2019
- HERE IT IS! A video on how I built and installed our custom fridge box, storage box and single rear drawer in the MQ.
Parts I used were;
1300mm TITAN single drawer
TITAN Universal 1300mm wing kit
12mm ply for the fridge box
Black spray paint
Metal mesh (bunnings)
18mm Standard MDF for the base of the fridge and storage box
2x2 m marine grade carpet from BCF
SIKA contact adhesive (much better than the spray adhesive)
Assorted screws, brackets, bolts and nails
All up it cost around the $1,000 mark - Which I'm pretty happy with!
But if I had my time again I think I would have chosen a better quality single draw. But I can always upgrade when this one carks it.
The whole fridge box length is the same as the Titan drawer (1300mm) which leaves enough space behind them both to run a slim line gravity fed water tank which I will install later.
Left wing panel will have 12V system - I'll upload a video on this!
Right wing panel in not 100% sure yet, but most likely a compressor.
Hit me up with ANY questions! If you enjoyed this video hit SUBSCRIBE and i'll keep the vids coming. Don't forget to check us out on Instagram
@campthecoast campthecoas...
Cheers for watching!
-CAMPTHECOAST
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Our Fridge rover.ebay.com/rover/1/705-534...
Titan Drawer www.ebay.com.au/itm/1300mm-Ti...
Carpet Adhesive www.ebay.com.au/itm/Sika-500m...
Fridge Slide rover.ebay.com/rover/1/705-534...
Universal Wing Kit rover.ebay.com/rover/1/705-534...
you just gave me another argument for having a single draw instead of dual drawers. really like your fridge setup. So much more convenient than having it on top of the draws
Nice build. I eagerly await the water tank/pump/tap install video. Travel safely & make memories.
That was wicked bro.
So helpful as I'm about to do the same in an XTrail with a 900 Titan drawer and 45Lt Kings fridge. Thanks for the inspiration and ideas mate!
Did you get the draw to fit in the xtrail?
Like the design and the quality of you work is spot on. Cheers
Looks bloody great mate👍
You should be doing this full-time
Great Job! Top notch for sure with no wasted space!
Well done bro! I built something very similar for my MQ. Single kings drawer and wing kit is a great platform to customise from. Nice work.
That was great! Thank you 👍👍 I love the airflow idea for the fridge as well.
Thanks heaps!
Using that mesh is a great idea! I was thinking about the exact same setup but hadn't thought of the mesh and was concerned about air flow around the fridge compressor, now I have the solution. Thanks.
No worries mate. Such a cheap easy solution too. I found it in the garden supply area at Bunnings 👌
Really love it when people make their own gear, top work.
Very tidy build. Building around a single drawer is the only way to go IMO. Good work.
Looks mint mate. Great work!
Ahhh yes, Triton videos!! Fantastic mate 🤙🏼
That fridge box looks mint!
Very nicely done, looks neat and is practical
Absolutely awesome setup mate! It's given me some great ideas for my MQ.
Got some nifty tricks there mate cheers
Killer vid guys, love it. Subbed, hope to see more on the MQ.
Absolutely awesome man top job! And great video editing
Top work Dude, Top Tunes as well.
Great work! Very thorough and learnt a couple of things for my future set up
Good stuff man! definatly not a easy project but what you've shown here is a great guide to diy and get it done 👌
Cheers mate! Thanks for the feedback.
Good video mate, showed plenty of detail 👌🏽
Dude props to you, this is a mint build did wicked! Thanks for the inspo🤙
Thanks mate!
Nice job champ.looks great.very practical.🙂
Very neat setup mate, inspiration for my new dual cab!!
Dude this looks mint. Great job.
Great video mate, looks very clean and neat!
Awesome setup and vid mate!
Top job mate, looks great and very professional. Ill steal the fridge box mesh idea too..
Haha anytime mate!
Outstanding mate!
Subbed for more MQ Videos.
Love the quality you put into this and all the small detail/Hints are perfect 👌
Thanks mate!
Awesome job mate, looks great
Thats a good looking setup,enjoyed the vid aswell👍
Well done Bro, good quality and well explained 👍
Be proud mate, thats an awesome job. I'm jelly.
Great job! Just one thing I can mention...With a canopy like that, you need to seal the lid at the back with some rubber as it always lets in dust everywhere. Just a tip.
So neat man! Good job
Mad setup mate
Great work and awesome job of editing the vid!
Cracking video mate 👌🏻👌🏻
Great setup, definitely getting me inspired to do my own
Top Job mate.
nice work mate looks mint
Great video mate, Thanks for sharing !
Great Stuff Cobber !
Well thought out and executed lil project there. I made the mistake of NOT angling the front of the fridge box and subsequently cant open my fridge lid up as much as I need to. will have to go back for a chop. Wish I saw your vid first...lol
It was an after thought for me too. Once I put the original box in I realised I couldn't close the rear window on the canopy 😬
Awesome... great stuff brah
Awesome job mate.
Great video! I’m been needing to revamp my Triton and this is spot on what I’m looking at doing
Thanks mate!
Nice job looks mint.
Really really really nice work dude.
Perfect timing too as I’m just about to head off to get some of the same drawers for my Pajero Sport.
Your layout is perfect for me too although I might put two drawers on one side instead of one.
Thanks heaps for posting.
Thanks for the feedback mate! Goodluck on your pajero project!
Hi Mate really really enjoyed like every one side ( great work )
Looks great, top job
Great job mate 👍🏽
Looks awesome mate 👌
Nice set up
Awesome job matey
awesome job
Nice!! Great job.
Nice setup had the king's draw for a year now I've pulled it apart and made it bigger, using some of components and new ply😂
Great build mate. Have been wanting to do something similar. Got the inspiration to attempt it now........hopefully it turns out as good as yours.
Thanks mate! It's definitely worth it - take your time to get it right and you'll only have to do it once 👌
Love ya work❗️👌🏼
Goooood job mate
Looks awesome mate
Cheers mate!
When I installed drawers I just got spray on tub liner around the hole, it still covers the hole from rust and is good and practical
Mint install 👌 You could possibly just modify that Titan drawer slightly to make it work better, bearings etc
Great setup mate, this gives me an idea for my hilux. :)
Great Video!
DIY ,good job almost makes me wanna tackle my own 🍺👍🇦🇺
Great ideas!
It is a very polite work, I will be helpful
Man that was a great video 👌🏻
Thanks mate!
Dope! Great job!
Thanks so much!
You my man are a true professional👌🏻👌🏻
He made kings look good
Dude, well made draw and fridge set-up, video production is top-shelf too... I'm thinking I'm gonna let the fellas at drifta do mine for me though, don't have the same skills on the tools as you!
I would love to get a drifta set up myself one day!
Nice job mate , credit where it"s due 🙂
Similar ideas to what I want to do with my Colorado. You've given me some good ideas to consider but I'd really like to see the electrical panel install and the water tank fitted.
Nice work bunge, any update on other work done , ie compressor and 12v instal?
can you do a video of the 12v system? what products and how you wired it up etc.
Great 👌
Great job mate... Loving the channel... Keep the build up going... Any rough plans on this? I too want tk do the same kinda thing
Hai, i love what you built. How do you connect the mesh to the fridge box in minute 2:39 - 2.41? Thanks
Neat install and great video.
What did you use to fix the mesh to the box?
Cable clamps?
Nice job mate well done
Thanks mate!
Id probs just put your 12v socket at front of you slide so you can hold it up when slide the fridge back and doesnt fall into fridge slide on you 👌
Hey mate
Do u have a cut out for your fridge plug in the back
Solid as setup man!
How's the Triton treating you so far?
Looking at the market for a dual cab ute
Love the vid mate, what ratchet screw driver was that?
Great build. I have been looking at making something similar but currently looking for similar mesh, where did you get that from?
Sorry for the late post mate, I just got it from the garden section at Bunnings
Hello mate what size screws did you use to screw the fridge box together thanks
How much do you take off your panels to allow for width of carpet
What about dust .? Are you getting any in? And if so ,what steps have you taken to prevent dust incursion. ?
Nice job mate! How did you fix the wire cage to the fridge box? Cheers 🤙🏽
Just with staple nails. Although some have started to pop out so I'll have to come up with another solution.
How’s u get the fridge cord to go in and out with out bunching up or getting pinched somewhere cheers
I was always planning on getting one of the snake cord cover things, but we never had a problem with it, and it has never been stuck.
How did you attach the metal mesh to the wood frame, or is it just pressure fit from both sides? :O
Just with staple nails mate 👌
Hey mate, top video. How did you fix the mesh to the panel?
Just with those little U nails mate
@@campthecoast3353 perfect, going to attempt this. Hubby will be stoked when he gets back from work and it's done! Really liked the video! Thanks
Nice! What are those brackets for the wings and where'd you get them?
Thanks! They came with the universal wing kit purchased from 4wdsupacentre
@@campthecoast3353 cheers!
How did you attach the mesh to the fridge box frame?
Just with staple nails. The mesh is really light weight, so they have held it really well.