Love what you're doing with the channel Andrew. Real world, relatable content for us Mustang guys whom are on realistic budgets. Keep on doing what you're doing my man, we appreciate you👊👊👊
Man I was so nervous on the first coyote I timed. Besides putting cams in my 3v I’ve never really been inside of an overhead cam motor only pushrod. But now I’ve done 3 and I can’t believe how easy it was.
Do yourself a favor, the tower looking things that are the floor for the engine mounts can be cut down. I removed almost two inches then had the floor welded to the crossmember again. For me, I was looking for a way to lower my transmission because it was hitting the trans tunnel. This was for GM 10L80. So you might gain needed clearance for your 10R and drop the engine allowing you to maybe use the stock hood, maybe. If you do this the oil pan is definitely going to hit the front portion of the crossmember so notched that by two inches also. You’ve already done the back. But I would definitely have the notched areas reinforced to keep the crossmember strong.
Absolutely love this. I am the original owner of an 04 MM with Trilogy 67. Sold the car a few years ago, but these cars are a blast with HP! I can only imagine what this will be like! This is hot rodding! Im a life long mustang fan and own a 19 Bullitt and 89 GT. I'll be following along.
Your channel is great and should be at least double in size. I think we both know the other channels , I think you even mentioned recently. Anyways, keep up the great content. Just picked up a boss and can’t wait to get started!
Hey man just wanted to say love watching your videos, my father and I used to watch you ALL THE TIME but he sadly passed in 2017 but I always still try and find time to watch you. You’re doing big stuff man thank you!
This thing better be at mustang week here in Myrtle Beach next year :) I own the Dark Tordor red one you met me 2 years ago at the bass pro parking lot meetup . Ps I need a single wheel one on my car is de laminating 😢.
What oil do you recommend for turbo coyote built engine. I been using rotella t6 5w40 some said t4 non synthetic 15w40 for a built engine. Whats your opinion?
I typically suggest 5w-50 for any performance or boosted application coyote. Similar to how ford calls for 5w-50 on the predator, pp gt, boss, voodoo, etc.
Relax bud, fitment of both blocks are basically the same, I get why you're upset, I also was like huh, last vid he was panning for a Yote, where the heck did he find a Predator block in a couple days, but when I got it, so what, it's a sick 1000hp setup anyway. His choice is not gonna affect me either way. Don't be so reactionary and learn to take little things like this in stride
Cleetus's first Marauder was Turbo LS swapped, and his new one is an N/A Coyote with a 6r80. This car has been in the works since way before Cleet bought his new Marauder
@@904Saleen same mod motor set up,if you wanna nit pick it he blew it up 2 times and then went with a tkm coyote before your boy over here or is it different because it’s a gt500 blower
Love what you're doing with the channel Andrew. Real world, relatable content for us Mustang guys whom are on realistic budgets. Keep on doing what you're doing my man, we appreciate you👊👊👊
Thanks man! I appreciate the support.
Ohhhh shit cleetus McFarland where u at for a race 😂😂
👀
That be fun
Man I was so nervous on the first coyote I timed. Besides putting cams in my 3v I’ve never really been inside of an overhead cam motor only pushrod. But now I’ve done 3 and I can’t believe how easy it was.
Your videos deserve more views.
1000hp that thing is going to make some jam!!!
This is really cooler Brother!!
You can graft a scoop or cowl onto the stock hood or an aftermarket hood. There are many to choose from so you can make it exactly the way you want.👍
Do yourself a favor, the tower looking things that are the floor for the engine mounts can be cut down. I removed almost two inches then had the floor welded to the crossmember again. For me, I was looking for a way to lower my transmission because it was hitting the trans tunnel. This was for GM 10L80. So you might gain needed clearance for your 10R and drop the engine allowing you to maybe use the stock hood, maybe. If you do this the oil pan is definitely going to hit the front portion of the crossmember so notched that by two inches also. You’ve already done the back. But I would definitely have the notched areas reinforced to keep the crossmember strong.
Hope to see more of this soon
Absolutely love this. I am the original owner of an 04 MM with Trilogy 67. Sold the car a few years ago, but these cars are a blast with HP! I can only imagine what this will be like! This is hot rodding! Im a life long mustang fan and own a 19 Bullitt and 89 GT. I'll be following along.
Your channel is great and should be at least double in size. I think we both know the other channels , I think you even mentioned recently. Anyways, keep up the great content. Just picked up a boss and can’t wait to get started!
Is there a video documenting getting the mockup engine installed and the header choice, etc? Cool project, thank you.
Yes sir few videos back
Damn that Mercury is going to be so sick
Tell Cleetus to line it up!
Stock marauder vs stock marauder
Hell yeah that'd be sick... Heard Cleet is planning on twin air compressors for his, the stock Marauder shootout gonna be awesome
I own a rare Kenny Brown Drag Pack marauder and I love it, plus they are doubling in value now!🐍
I just got picked up a gen 2 coyote yesterday with 15k miles... what's my first mods to do on the motor?
Wow this is going to be a sick street beast cruiser, you will need to keep plenty of rear tires for this, it
is going to seriously melt tires.
Hey man just wanted to say love watching your videos, my father and I used to watch you ALL THE TIME but he sadly passed in 2017 but I always still try and find time to watch you. You’re doing big stuff man thank you!
Outcast makes some great motor mounts. Using them for my 56 f100.
PS do a shaker hood. Guys wanted it when these came out just like the Mach 1.
Best looking truck ever made
Man my first car was a grand marquis. I always dreamed of a maurader... now ive got a roush 427r but I would trade it for this car any day.
Give a way car sounds good 👍🏼
No way lol
This thing better be at mustang week here in Myrtle Beach next year :) I own the Dark Tordor red one you met me 2 years ago at the bass pro parking lot meetup . Ps I need a single wheel one on my car is de laminating 😢.
What oil do you recommend for turbo coyote built engine. I been using rotella t6 5w40 some said t4 non synthetic 15w40 for a built engine. Whats your opinion?
I typically suggest 5w-50 for any performance or boosted application coyote. Similar to how ford calls for 5w-50 on the predator, pp gt, boss, voodoo, etc.
@@MustangLifestyleTV okay that makes sense. What 5w50 oil do you use?
Don't have a coyote, but I would recommend Schaefers or Amsoil. Both have better bearing wear, and flow vs most brands. I run Schaefers.
@@karlhopkins713 schaefers is honestly the one I been thinking of getting. I ran it in my turbo honda before Thank you so much.
Never hit the like button so fast
Where are you located?
Cleetus has a gt500 swapped maurader he bought few weeks ago, he has the first gt500 swapped crown vic
Cleetus's new Marauder is an N/A Coyote swap at the moment
I'm thinking a Cobra R style hood.
There’s no way for you to verify that claim
Classglassperformance makes a stock looking hood
Hell yeah
Just cut the hood. Have the blower stick out
Pissing more people off with the title again😂😂 don’t bother me. Cars clean and gonna move tf out
More comment engagement = RUclips algorithm promotes video to more people.
Clickbait title tho
Click bait. See ya I won't be back
Engine was meant to be but never happened
Here we go with the clickbait "gt500 swapped" .... just like last time with the Mustang. Its a GT500 blower not a GT500 swap. So annoying
Its potatoes lifestyle, what you expect
Dammit bruh 💯🤦🏿♂️
Relax bud, fitment of both blocks are basically the same, I get why you're upset, I also was like huh, last vid he was panning for a Yote, where the heck did he find a Predator block in a couple days, but when I got it, so what, it's a sick 1000hp setup anyway. His choice is not gonna affect me either way. Don't be so reactionary and learn to take little things like this in stride
Stop hating lil Timmy’s
It’s technically the same shit lol
First
🍪 - 😂😂😂
cleetus is building a twin turbo 5.0 marauder if i remember correctly ps love the build cant wait to see more i have a 02 lx sport
🤌
Perty pathetic that you always copy either Cletus or pfis content or “laugh “ like Brent
Cleetus's first Marauder was Turbo LS swapped, and his new one is an N/A Coyote with a 6r80. This car has been in the works since way before Cleet bought his new Marauder
@his first one was neighbor with a gt500 engine which he did when he was with Jeramy at faster prom
So good try
@@mike1990s and that was an older 5.4 GT500 swap from an 07-12. Completely different.
@@904Saleen same mod motor set up,if you wanna nit pick it he blew it up 2 times and then went with a tkm coyote before your boy over here or is it different because it’s a gt500 blower