How to Replace Passenger's Side CV Axle 2009-2014 Ford F-150
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AAC...
This video shows you how to install a new TRQ in your CV axle 2009-2014 Ford F-150. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
Tools you will need:
• Pry Bar 1aau.to/oTz/1AX...
• 13mm Socket 1aau.to/obt7/1A...
• 18mm Socket 1aau.to/oagH/1A...
• 21mm Socket 1aau.to/oagH/1A...
• 8mm Socket 1aau.to/obaa/1A...
• 1/2 Inch Impact Gun 1aau.to/osQ/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obAp/1A...
• Swivel
• Torque Wrench 1aau.to/oaEj/1A...
• Anti-Seize Grease
• Bearing Grease
• Gloves 1aau.to/o5S/1AX...
• Safety Glasses 1aau.to/oW6/1AX...
• Hammer 1aau.to/oTZ/1AX...
• Rubber Mallet 1aau.to/ogP/1AX...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks!
I had to remove my strut because the cv axle would hit it. Maybe it was the leveling kit that i have thats causing the issue.
Very professional and well done. Thanks for posting!
Buen vidéo 💯🤟🏼
I replaced my front brakes (Calipers and hose ) and hubs. The right front hub was definitely bad and I thought that was the reason I was hearing a grinding noise in reverse with the wheel turned. My suspicion now is that its the CV axle. What do you think?
Do I have to use the O ring? if so do you have part # for it?
+heather banker Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ