I have a gbx75 that wouldn't charge. Took it apart and charged the internal battery with a 4amp charger for about 5 minutes...hooked it back to the original charger and bam, it's charging! Thanks for this video!!!
I just wanted to say thank you for such great advice I went through three noco 75 The GBX 75 and all of them would not charge after them telling me to throw the last one away I figured I'd take it apart and do a little research with the instruction from your video I now have three working units All of them with the same problem. I did have to watch your video a couple times because it moved pretty quick and it wasn't perfect when it came to viewing which wires you're actually jumping but once I got inside the box I could clearly see black and red I took a variable 110 to 12 volt meter and slowly started to increase the voltage until I saw a charge from there just like you said plug it into the fast charger Good to go again thank you for your help this was a great video
Hi, I am wondering whats wrong with other gb75x where they have power. how to fix it? I have gbx75 it lights on orange power light and other lights but wont charge or anything. please help. If i was in USA i would have shipped it to you for sure.
I have gbx 75. Battery is 14 v but not power.any led not light.also i checked and on board (where batery must connected 7 pins) is shorted.where can be fault?many thanx
I have another gbx75 i have 50% of charge.working great but not charging.when i connect charger i have red light charger error(with all chargers).😢.do you know this issues?many thanx for your answers
Great video 👍👍
I have a gbx75 that wouldn't charge. Took it apart and charged the internal battery with a 4amp charger for about 5 minutes...hooked it back to the original charger and bam, it's charging! Thanks for this video!!!
I just wanted to say thank you for such great advice I went through three noco 75 The GBX 75 and all of them would not charge after them telling me to throw the last one away I figured I'd take it apart and do a little research with the instruction from your video I now have three working units All of them with the same problem.
I did have to watch your video a couple times because it moved pretty quick and it wasn't perfect when it came to viewing which wires you're actually jumping but once I got inside the box I could clearly see black and red I took a variable 110 to 12 volt meter and slowly started to increase the voltage until I saw a charge from there just like you said plug it into the fast charger Good to go again thank you for your help this was a great video
Love your work thanks
Can you get Cells for this device since you made this video 2 years ago? Thank you, Sir.
Do You still repair NOCO Products?? i have a NOCO GB50 won't charge it only has red light when plugged in can you helpplease
yes we do accept shipping for repair
Can you tell me which pins for charging the battery ?
Can you explain about noco 155
sure! next video i just have to get it ready.
@@SOSfixElectronics If you need brains for the 155. Can you send it to me
Hi, I am wondering whats wrong with other gb75x where they have power. how to fix it? I have gbx75 it lights on orange power light and other lights but wont charge or anything. please help. If i was in USA i would have shipped it to you for sure.
check the battery voltages should be over 9v to start charging
I have gbx 75. Battery is 14 v but not power.any led not light.also i checked and on board (where batery must connected 7 pins) is shorted.where can be fault?many thanx
cant be shorted because the battery still has some charge. hard to tell the issue could be anything maybe the controller is bad
I have another gbx75 i have 50% of charge.working great but not charging.when i connect charger i have red light charger error(with all chargers).😢.do you know this issues?many thanx for your answers
check battery voltages
@@SOSfixElectronics 14v (3.5 every cells)