My unit is only 5 weeks old it’s only been used 3 times to start I change it from my car all the time it takes full charge but will not switch off light works and charging phones perfectly but drains it self,, it has a red lightning bolt icon on all the time also it doesn’t respond to the power buttons only the light any ideas? Thanks in advance to any help
Hello Friend: I have 2 Noco GBX155 and both does not charge . It shows only 25% charge with USB Charging and does not move forward. What could be the Problem. Please let me know? I would love to bring to you for repair but you are in USA and I am in UK. Thanks
I have a noco gb40 not charging power light is on and 25percent light blinking never goes above that can it be repaired or replaced the battery is it worth fixing? Where could I buy a battery
Mr Noco you are amazing keep up the good work
If only I met you 3 NOCOs ago... 😂
My unit is only 5 weeks old it’s only been used 3 times to start I change it from my car all the time it takes full charge but will not switch off light works and charging phones perfectly but drains it self,, it has a red lightning bolt icon on all the time also it doesn’t respond to the power buttons only the light any ideas?
Thanks in advance to any help
Hi. Why at putting on charge torch light going on itself?
Where from do you buy parts,, like new chargingcport? I contacted NOCO, they said not providing any components
ebay
Just curious on how much would a repair like that would cost? on the charging port replacement ?
txt 8502425552 if you have any repair or shipping questions
Do you work on Milwaukee batteries for power tools?
yes we do
Can I put a 2 ohm 1/4watt resistor for r100 resistor?
Do you have schematics for it, as i am not able to send it in for repair as im on Thule Air Base in Greenland.
Are you still fixing these? I have one that has only been used 10 times, died and won’t take a charge anymore.
Do you still repair noco boost packs
yes we do
Hello Friend: I have 2 Noco GBX155 and both does not charge . It shows only 25% charge with USB Charging and does not move forward. What could be the Problem. Please let me know? I would love to bring to you for repair but you are in USA and I am in UK. Thanks
check battery cells voltages
Do you still work on these my Gb150 12v 3000A wont take a charge and it does not look the same inside as your videos.
yes i do
Hi
I have noco 150gb and it is only charging on 75%
Is it battery or board problem?
Thanks
battery
I m in ocala fl how do I get in contact with you so I can send one for repair not charging
Txt 8502425552
I have a noco gb 150 and only charging 25 to 50% I believe has the same issue, where and when can you fix it and for how much?
i need to check it. txt 8502425552 if you have any questions about shipping
I have a noco gb40 not charging power light is on and 25percent light blinking never goes above that can it be repaired or replaced the battery is it worth fixing? Where could I buy a battery
we do only board repair if your board is bad we can fix it. but we don do battery replacement as there is no available part
@@SOSfixElectronics would it be worth sending it to you if a new one is$100 an its a 2016 year unit thanks for for getting back to me so fast
How do i send it repair to ypu i have nocogenius gb 40 boost plus doesent charge
shipping address: youness faiz 12911 sarah ln largo fl 33773
Hello, I have a gb150 that needs repairs.
How can I contact you?
txt 8502425552
How much do you charge to fix them? My gb150 is plugged into charger and only blinks on 25% but does not get any higher
i need to check it, for the board repair around $60
@@SOSfixElectronics please call anytime. I really need this fixed
I have a noco 155 that is not charging?
send it in for repair
In which country are you my friend?
....؟
@@czaralmaleki4768 usa
Where can I send it to you for repair
I am from Chicago
@@rubencarbajal1885 youness faiz 12911 sarah ln largo 33773 write your phone number inside the box
I have a Boost Pro GB150 that has a similar problem but I'm in the UK. Do you know anyone that can repair it here? Thanks
Did you manage to find anyone who could fix it?
Ever see one that takes full charge but just doesn't so anything. No output voltage? Even when bypassed
relais
7:49 R100=100mΩ no 0,1Ω
you right and 100 mohm =0.1 ohm because 1000 mohm = 1ohm
@@SOSfixElectronics Isn't the standard SMT marking of "100" = 10 ohms? And two of these in parallel would be 5 ohms.
Never mind. Sorry, I did not look at the "R" preceding the numbers. It would be 0.100 ohms. Great video!
R100 have 1.ohm each
11.3v on status