Great job, thanks! As I know the free pin from the car is used to right steering wheel buttons. To use them you need to install a new steering wheel and a new android cable
Moving up a step. You can buy a license plate cover that integrate the camera to it. That way you can have a clean install as if it's factory. The camera you have can use that setup.
Thank you so much! You saved a tons of my time! May I ask a question? My ABS light and slippery road light also turned on when I installed this. How do I made them go away?
Hi thanks for the feedback. As for the lights turned on, you may reset 2 ways. 1 method is to push the traction control button below the AC vent on the left hand side of the steering wheel. If that doesn't work, use the following steps: Step 1: Open your hood and remove the negative battery cable with a socket wrench. Step 2: Wait for at least three seconds. Step 3: Reconnect the negative battery cable to your car battery. Step 4: Tighten the cable with a socket wrench. That should clear the lights. Let me know if it works. Cheers
Hello, very instructive video. Please, how do I run the camera wire from the rear seat to the car booth? I’m currently doing mine at the moment. Please help
@@eazidiy Also, how did pass the camera lens or wire through that hole after removing the 6 10mm bolts towards the license plate. The head of the red and yellow wire of mine can't pass through.
@@Izuofafrica use the license plate light hole to pass the wires. Just loosen the bolts holding the light and that will give you small room for the wire to pass through.
Hi EaziDIY, are this head unit come with all the wired harness to just plug and play to the car or you ordered I separated harness to plug it in to the car? Also Aldo the head unit will fit on the 2013 Corolla? I check on the link you post it in the description and the head unit says will fit 08-12 Corolla but I have a 13 Corolla and I do not see any differences between the 12 and 13 Corolla’s! Thank you in advance 👍
Hi David, the wire harness came with the unit and yes it is plug and play. The radio will work with 2013 corolla as well. I will suggested you buy a 4GB RAM radio instead of 2 GB.
I have a 2011 Toyota Corolla sport and when I tried to plug in the harness sent to me it burnt the radio fuse, also my harness is a bit different and I can’t seem to make it work. Do you have an idea why?
If you have a blown fuse, the probably cause the wire harness. If the terminals are incorrectly matched with your car's harness. If you can send me an email eazidiy@gmail.com with pictures of your harness and radio, I can take a look.
Mira Amazon.com. Aqui hay un enlace a uno similar...UNITOPSCI Car Stereo Android 10.1 Navigation Stereo for Toyota Corolla 2009-2012 Double Din Car Radio 9'' HD Touch Screen 2G 32G GPS Navigation WiFi Bluetooth FM Radio USB Mirror Link + Backup Camera www.amazon.com/dp/B08CXTL3F3/ref=cm_sw_r_apan_glt_fabc_HJB7A0QFT2P1CCTE7XA4?_encoding=UTF8&psc=1
Any radio shop and auto repair should be able to help.You can do it yourself, atleast the radio installation. Buy small kits like wrench and screw drivers and you will be fine.
** Android Radio: Aliexpress.com tell the seller that you are from EAZIDIY for discounts $2.00 discount for orders over US $98.00 use code: K384LC6SMXZQ $5.00 discount for orders over US $188.00 use code: L702LQ733L2B $8.00 discount for orders over US $258.00 use code: 1TCM5GLLCPXU Use this link from Aliexpress www.aliexpress.us/item/2255799973184535.html?spm=a2g0o.store_pc_groupList.8148356.23.22bd28abRvRpR6&pdp_npi=3%40dis%21USD%21US%20%24210.57%21US%20%2498.97%21%21%21%21%21%402103225116886591610634864e16d7%2112000030141220630%21sh%21US%213962034193&gatewayAdapt=glo2usa
I appreciate it! I’m excited to try my hand at installing this head unit. Thank you so much for the video and for taking the time out of your day to send the link of the head unit!
Hey, I use my metro smart ride device in my car for wifi. It is easy to install, just plug to the obd2 port. Other mobile network carriers have similar devices as well. Here is the link to metro pc wifi device www.metrobyt-mobile.com/metrosmartride
Great job, thanks! As I know the free pin from the car is used to right steering wheel buttons. To use them you need to install a new steering wheel and a new android cable
You are welcome, I have another video on how to install Steering Wheel Controls for the Toyota. Check my channel
Bro you did a great great job!! Recording and getting it done! Thanks so much.
I appreciate your positive comment. Thank you
thank you for this video! please never take it down
So much appreciate your comment! Thanks
Thank you so much. Your video walked us through installing our system.
It is my pleasure! I am glad the video was helpful
Moving up a step. You can buy a license plate cover that integrate the camera to it. That way you can have a clean install as if it's factory. The camera you have can use that setup.
Thank you for your feedback. Could you share the link to the item mentioned?
Great video. Nothing but love
Thank you! I appreciate your positive feedback.
Thank you so much! You saved a tons of my time! May I ask a question? My ABS light and slippery road light also turned on when I installed this. How do I made them go away?
Hi thanks for the feedback. As for the lights turned on, you may reset 2 ways. 1 method is to push the traction control button below the AC vent on the left hand side of the steering wheel. If that doesn't work, use the following steps:
Step 1: Open your hood and remove the negative battery cable with a socket wrench.
Step 2: Wait for at least three seconds.
Step 3: Reconnect the negative battery cable to your car battery.
Step 4: Tighten the cable with a socket wrench.
That should clear the lights. Let me know if it works. Cheers
awesome, the camera looks pretty good.
Thank you
Hello, very instructive video. Please, how do I run the camera wire from the rear seat to the car booth? I’m currently doing mine at the moment. Please help
Just collapse the rear seats and tuck the wires under the seats. You need to open the trunk side rug and follow the wire path
@@eazidiy Thank you.
You are welcome and I hope you are able to complete your installation? If you need further technical assistance, you can email me eazidiy@gmail.com
@@eazidiy Also, how did pass the camera lens or wire through that hole after removing the 6 10mm bolts towards the license plate. The head of the red and yellow wire of mine can't pass through.
@@Izuofafrica use the license plate light hole to pass the wires. Just loosen the bolts holding the light and that will give you small room for the wire to pass through.
Thank you very much. Great job with one hand, awesome
Thank you for the positive feedback
hey where did you get the mount for the screen i have a toyota 2007 sport and my screen has no mount idk what to do
Here is an Amazon link amzn.to/3XRge3g
@@eazidiy thank you so much
@dopd5675 you are welcome
Hi EaziDIY, are this head unit come with all the wired harness to just plug and play to the car or you ordered I separated harness to plug it in to the car? Also Aldo the head unit will fit on the 2013 Corolla? I check on the link you post it in the description and the head unit says will fit 08-12 Corolla but I have a 13 Corolla and I do not see any differences between the 12 and 13 Corolla’s! Thank you in advance 👍
Hi David, the wire harness came with the unit and yes it is plug and play. The radio will work with 2013 corolla as well. I will suggested you buy a 4GB RAM radio instead of 2 GB.
@@eazidiy thank you 👍
@@spartan2010100 you are welcome
The ground cable on the trunk where did you bolted on?
I didn't bolt the ground wire, I tapped it into a black/white wire in the trunk. See the video for reference
You are amazing but please 🙏 try give someone ur phone to video u when next
Thank you for the constructive feedback, well received.
Great video! Thank you!
Thank you
Quicker Saber el costo total del equipment por favor
Total cost was $180 when I got them
Hello, I don't understand, red is the positive and white is the negative?
White with a black strip wire is negative. That is a good ground already available in the trunk to use.
How you picking a binze one
I have a link in the description box with promo code to buy the binize headunit
Where do you buy the 20 pin harness kit?
If for toyota corolla amzn.to/3Dkf5qG
I have a 2011 Toyota Corolla sport and when I tried to plug in the harness sent to me it burnt the radio fuse, also my harness is a bit different and I can’t seem to make it work.
Do you have an idea why?
If you have a blown fuse, the probably cause the wire harness. If the terminals are incorrectly matched with your car's harness. If you can send me an email eazidiy@gmail.com with pictures of your harness and radio, I can take a look.
@@eazidiy email sent! Thanks
I got your email and I have since responded.
how about the steering wheel control bro?
Watch this video ruclips.net/video/S83EnZiMynQ/видео.html part 1 &2
@@eazidiy thank you bro more video for android unit content bro and headligth content
@@tAkeDapOgZ You are welcome!
Hey man can you install in my corolla I can drive to you if you live around Phili.
Yes I live around Philly, what year of corolla do you have? email me eazidiy@gmail.com
I like it 😊
Thank you
What do you think of the screen after long use?
The radio works great, no issues so far. Only thing I would have done differently I to get a 4GB RAM instead of 2 GB
H can you tell me what is the model of radio
Thanks
Binize Android Radio for 2009-2012 Toyota Corolla. I have the direct link to purchase in the description box of the video.
Hey
I installed the device but my camera is not working
Do mind helping me out with this
Thanks
Send me an email eazidiy@gmail.com
Donde puedo comprar ese radio broo
Mira Amazon.com. Aqui hay un enlace a uno similar...UNITOPSCI Car Stereo Android 10.1 Navigation Stereo for Toyota Corolla 2009-2012 Double Din Car Radio 9'' HD Touch Screen 2G 32G GPS Navigation WiFi Bluetooth FM Radio USB Mirror Link + Backup Camera www.amazon.com/dp/B08CXTL3F3/ref=cm_sw_r_apan_glt_fabc_HJB7A0QFT2P1CCTE7XA4?_encoding=UTF8&psc=1
Where did you buy it ?
Binize Android 9.1 Car Stereo... www.amazon.com/dp/B087Z7JQ8R?ref=ppx_pop_mob_ap_share
Amazon... check the link I sent prior
Where should I go to get this done like you did it
Any radio shop and auto repair should be able to help.You can do it yourself, atleast the radio installation. Buy small kits like wrench and screw drivers and you will be fine.
@@eazidiy thanks for believing in me
I shared the video to encourage people to do it themselves. So you have to do it. I am here for you if you need any technical assistance.
Which head unit would you recommend buying now? After watching this video I’m thinking of installing my own in my 2013 Toyota Corolla
I recommend atleast a 4GB RAM with android 11 OS.
I have been searching for a head unit with those specifications but looking through Amazon I could not find one. Is there a brand you recommend?
** Android Radio: Aliexpress.com tell the seller that you are from EAZIDIY for discounts
$2.00 discount for orders over US $98.00 use code: K384LC6SMXZQ
$5.00 discount for orders over US $188.00 use code: L702LQ733L2B
$8.00 discount for orders over US $258.00 use code: 1TCM5GLLCPXU
Use this link from Aliexpress www.aliexpress.us/item/2255799973184535.html?spm=a2g0o.store_pc_groupList.8148356.23.22bd28abRvRpR6&pdp_npi=3%40dis%21USD%21US%20%24210.57%21US%20%2498.97%21%21%21%21%21%402103225116886591610634864e16d7%2112000030141220630%21sh%21US%213962034193&gatewayAdapt=glo2usa
I appreciate it! I’m excited to try my hand at installing this head unit. Thank you so much for the video and for taking the time out of your day to send the link of the head unit!
You are welcome.
Can u make vid on wifi ... thanks
Hey, I use my metro smart ride device in my car for wifi. It is easy to install, just plug to the obd2 port. Other mobile network carriers have similar devices as well. Here is the link to metro pc wifi device www.metrobyt-mobile.com/metrosmartride
Can I connect my
Phone if it’s Apple to that radio for my 2012 rolla?
Yes you can connect your Iphone to the head unit via Bluetooth. You will need a dongle to use Carplay/Android auto on the unit.