Hey there once again all you beautiful People good to see you back here again with the melting Muppet. Just a quick simple one today as I really want to get that big 690 kg Motor melted down for next week and it's gonna be a tough job but a fun one , so if you like Copper be sure to check it out because I'm hoping for 40 or 50 kg 🤞🏻. Anyway, as I always say sit back relax enjoy the video and I hope you have an amazing weekend 👋🏻😃
I'm a retired policeman in The Netherlands. I broke my leg on a terribly, two years and a month ago. I discovered RUclips. Lots of trash, but a few nice gems. Your Channel is one of them. I like it a lot. Slow paced, humor and calming. It's one of my weekend treats, although, as I am retired, my whole life became one big weekend. Have fun and I hope to see more of your video's. Greetings.
I love watching these videos. 2 years ago when I was having a liver transplant due to medication reaction i would watch these videos when I was in the hospital and they helped pass the time. Thanks for the videos.
@edwardneal4819 yeah after a long road to recovery, i am now on a really low dose of antitejection meds and got a good bill of health from the amazing Dr's. I hope your brother is doing good.
My man, Ive just realized how well the sound of the burning forge puts you to sleep. I was watching during the dinner and i almost fell to sleep in my armchair. The ideal white noise. You could record it, and loop it into a 10hr video. Anyway, an awesome video
That new saw is great, nice looking ingots today I love brass melts the dry dusty slag is so cool on top of the liquid just super cool to me. Can't wait for the giant motor tear down and the feature length video...Have a great week bigD
@26:52 - Wednesday night the 6th i pan fried onions in olive oil, then a low grade beef filet in the pan and had those with heated refried beans, Bourbon and Beer for my beverage, turned out very tasty. this video is a Like 👍
Big stack D. I just wanted to say thank you for your videos. I bought a smelting furnace a few weeks ago and I finally found a hobby that I totally enjoy. I have been scrapping everything I have been able to get my dirty little hands on. I have learned so much from your videos. Thanks again for doing what you do.
Not a bad pour at all. Keeping the temperature just above the melting point helps a lot in maintaining the consistency throughout. The resultant ingots look very clean and not as, 'lumpy', as some we've seen in the past. A good effort overall. Turn that gate into a medal. It's the right shape for one! Random nonsensical comment? Pineapple disk drives make tortoise kneepads shiny.
Good morning from Dayton, Texas. Been watching for about 2 years now and enjoy every moment watching the melts and relaxing. Give the monkeys a scratch. As for the disc polish the inside to a mirror shine and hang as a mirror in the vault.
Damn that saw really quickens the pace eh? I would use that one brass piece as the casing for a Flavor Flav-sized pocket watch you can wear around your neck 😂. Have a great weekend!
Yeah, that bandsaw makes it so much easier thats for sure . Cheers for the ongoing support mate. Always appreciated. I’m definitely looking forward to next week’s video. It’s gonna be a big job that’s for sure👍🏻 have a great rest of the weekend, buddy
Thanks for another great melt always looking forward to watching your weekly melts helps clear the mind over coffee in the morning have a great weekend
Hey Bigstacked... An idea for the valve gate... give the indented area i high gloss polish and turn into 'Ancient Mirror' and either keep in vault or make it pretty for Mrs. StackeD... Just an idea
I have watched your videos for about 2 years, I dont know why but I am hooked. I build and repair machinery from time to time and maybe one of those days I will cast some part for that purpose. Hi from Sweden.
As a truck driver in Arizona I can tell you few things are more annoying than stopping for fuel, drinks and a quick windshield cleaning, only to drive through a swarm of bees 7 minutes later. 167 honey splatters dry very quickly at 65mph (105kph) when its 115 (46c) outside. Thankful for good aircon in the Peterbilt!
"Wow, that brass valve melted like butter! It’s fascinating to see how such a strong metal can turn into liquid under the right temperature. The colors during the melt were mesmerizing!"
Your channel is the most consistent watching I do on RUclips. My dad is a farrier/blacksmith, and I grew up watching him working in the forge, and your videos always remind me of that.
G’day, mate How are you? What a lovely brass valve you melted today; it looks like the metal was quite thick, you got a great amount of metal for your pile. At 26:56, it’s dangerous to leave that piece of meat in the pan and walk away, as a crow might come and steal it.😂 A great video this Friday, I hope to see that engine melting soon; it’ll be a huge amount of metal. Hope you have a really good week. Cheers, Max
Thanks again, mate. You’re a champion. Yeah I didn’t walk too far from that meat. That’s for sure as the crows definitely do steal food and they stole another bag of biscuits off the bench the other day again that I put aside for the magpies🙄. Not to worry I just need to lock the biscuits away better that’s all. Yes, the big Motor video should be out next week. It’s very slow process taking it apart but I’m loving every minute of it. Have a great weekend my friend👊🏻😁
a big sluice valve there ! the landscape it´s looking great with all the rains of lasts weeks ! love your workshop hope mine looks similar one day ! big cheers from Argentina !
Hi, i never leave a coment becouse i wacth the videos from the tv, but always wath all the advertising 😊 love your channel and i love your monkeys as well ❤ Im really excitet for the giant motor melt 🎉 I sent a big hug from Córdoba Argentina
I love that saw! I'm on the other side of the planet and we have exactly the same model in the shop at work. Different paint job and different brand, but from what I am seeing, exactly the same design. It's a neat little thing 😊
![1870s Circular Sock Knitting Machine [Restoration]](http://i.ytimg.com/vi/rAFlLEoFilM/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Hey there once again all you beautiful People good to see you back here again with the melting Muppet. Just a quick simple one today as I really want to get that big 690 kg Motor melted down for next week and it's gonna be a tough job but a fun one , so if you like Copper be sure to check it out because I'm hoping for 40 or 50 kg 🤞🏻. Anyway, as I always say sit back relax enjoy the video and I hope you have an amazing weekend 👋🏻😃
Can't wait to see it I'm going to take some of the pictures of my Kim that I built where I could start doing some melting
Free idea made a pathway paved in metal bricks. Something like aluminum. If you run into to a lot. Cute home addition as wel
Thanks Melting Muppet. you should get waldorf and statler to do commentary on one of your vids.
Awesome as always, maybe put a round mirror in it polish it up and give to miss BigD or put a picture in it of bullion and Ingot make it like a frame.
Great stuff as always
What was the reason to melt the brass slowly for
I'm starting out and did some copper
I'm a retired policeman in The Netherlands. I broke my leg on a terribly, two years and a month ago. I discovered RUclips. Lots of trash, but a few nice gems. Your Channel is one of them. I like it a lot. Slow paced, humor and calming. It's one of my weekend treats, although, as I am retired, my whole life became one big weekend. Have fun and I hope to see more of your video's. Greetings.
@@RikBrons cheers buddy, appreciate that mate 👊🏻😀
Gute Besserung, lieber Herr Polizist!👮🏻♂️
Ich wünsche Ihnen alles Gute in ihrem wohlverdienten Ruhestand! 👍🏻👍🏻👍🏻🏖️🏝️🤗
Check Vice grip garage too, relaxing and fun, and damm, you will learn something also.
I love watching these videos. 2 years ago when I was having a liver transplant due to medication reaction i would watch these videos when I was in the hospital and they helped pass the time. Thanks for the videos.
Hope you're fully recovered. My little brother just had one.
@edwardneal4819 yeah after a long road to recovery, i am now on a really low dose of antitejection meds and got a good bill of health from the amazing Dr's. I hope your brother is doing good.
I hope
That you do Godly and respectful things with those .
Hey.... Thanks for not being dead. Good luck brother
My man, Ive just realized how well the sound of the burning forge puts you to sleep. I was watching during the dinner and i almost fell to sleep in my armchair. The ideal white noise. You could record it, and loop it into a 10hr video.
Anyway, an awesome video
It's like brown noise😮
Or brass noise today😂
3:45 hey brad lol
So good! 😂
Just chillin in a plastic tub with rain water
@@clawyraptor9029 Yep that's Brad allright, allways thirsty.
Trevor will be pissed
Who was brad😅
Good looking bars. Thanks for finding my Skull.
It's amazing how efficient things are when they're water cooled. That saw is a beast!
That new saw is great, nice looking ingots today I love brass melts the dry dusty slag is so cool on top of the liquid just super cool to me. Can't wait for the giant motor tear down and the feature length video...Have a great week bigD
Wow! You mastered the knack of melting brass without the Zinc smoke. Nice pours!
Best ASMR melt channel there was, there is and there ever will be.
Good arvo from Sydney ! Love all the vids think it's about time for a copper Magpie to sit watching over the stack ! If anyone can do it it's you
You got my vote! Been awhile since you've done a large art piece.
Great and funny at the end video, can't wait for the big motor melt. See ya next week. 😊
Cheers! Yeah, it's going to be a fun one! See you next Friday.
@@bigstackD at 0:31 you should get a oxygen and Acetylene Torch for that 1521 pounds motor
@@KevinLyons-gn7eunaw he just needs a 20lb sledge hammer😮 we'll see him sweat on this melt.🥵
@ how did you see my comment ?
I watch BigstackD!!
I agree a night melt with BRASS and a COLD ONE OR 2
Just leaving a random comment. Thank You for all the years of relaxing content.
Thanks mate, cheers for the random comment! Cheers for the support!
@26:52 - Wednesday night the 6th i pan fried onions in olive oil, then a low grade beef filet in the pan and had those with heated refried beans, Bourbon and Beer for my beverage, turned out very tasty. this video is a Like 👍
0:22 I love watching this tree. It's shadow must be pure bliss for the Australian summer. Plus you have it so beautifully shaped.
🇺🇸👍 looking forward to seeing the big motor melt down.
He'll get that bit eventually just giv him som time is all
Thank you. Very enjoyable. Your dogs are wonderful.
Much love and blessings to all ❤
Stay safe and be kind 🙏
I recommend using table salt when melting brass. It will melt, forming a passivation layer preventing zinc from oxidizing
I'm a try that
Big stack D. I just wanted to say thank you for your videos. I bought a smelting furnace a few weeks ago and I finally found a hobby that I totally enjoy. I have been scrapping everything I have been able to get my dirty little hands on. I have learned so much from your videos. Thanks again for doing what you do.
Not a bad pour at all. Keeping the temperature just above the melting point helps a lot in maintaining the consistency throughout. The resultant ingots look very clean and not as, 'lumpy', as some we've seen in the past. A good effort overall.
Turn that gate into a medal. It's the right shape for one!
Random nonsensical comment? Pineapple disk drives make tortoise kneepads shiny.
Your dogs are... They are just amazingly fabulous! My eyes goes wet every time you show them! Love them! 🙂
Good morning from Dayton, Texas. Been watching for about 2 years now and enjoy every moment watching the melts and relaxing. Give the monkeys a scratch. As for the disc polish the inside to a mirror shine and hang as a mirror in the vault.
Damn that saw really quickens the pace eh? I would use that one brass piece as the casing for a Flavor Flav-sized pocket watch you can wear around your neck 😂. Have a great weekend!
Yeah, that bandsaw makes it so much easier thats for sure . Cheers for the ongoing support mate. Always appreciated. I’m definitely looking forward to next week’s video. It’s gonna be a big job that’s for sure👍🏻 have a great rest of the weekend, buddy
I am really diggin' the saw!
Certainly is handy!
Thanks for another great melt always looking forward to watching your weekly melts helps clear the mind over coffee in the morning have a great weekend
What you are early today I like it MATE!!!!!!! good morning from Wakefield, Ma.
Day light savings Attleboro ma
Yeah, I always knew when it was 4:00 AM sharp on a Friday when I'd get the notification. Now it's going to be 3:00 AM for the next 6 months.
Thanks for your melts, Bigstack. It helps me to not think about the worries I have right now.
Morning from Glasgow, Scotland. Give the boys a scratch for me.
I know it's immature, but this made me laugh cuz my grandfather used to call his testicles "the boys." So, thank you for the laugh. 😂
"The boys" are nothing but trouble, there nuts!
Big Blue Wheeling D ! Bandsaw ing beautiful brass!❤️🇨🇦
Exactly what I was thinking for that valve wheel… a great wall piece .
My 6yo son loves your melting videos. His favourite thing to do before bed. He’s keen to see you meet your goal. Keep up the good work
I love your new cutting machine. Awesome
Excellent melts and excellent pours. As simple as it was, I like this video very much! Thanks for making Friday even better!
For a fellow that has a metal melt theme RUclips channel, you certainly put on a great cooking segment every week! Featuring Aussie cuisine!
😂
@@claywest9528 for sure! I always enjoy seeing the BigSnackD!!
@@athanasioskelidis2446 is that saw roasting? Or does it go back and forth ?
The pours are always spectacular. Thanks for another amazingly relaxing video 😃
when you put the cokecan onto that thing- i smiled- 'cos that Was also my first thought....😂
Wow! the meat after hard work got me! Heaven! Good job.
You are an expert in metal casting, metal polishing and metal refurbishment. That's great. Thanks for sharing.
Love your videos! They've been putting me to sleep for years now. Couldn't "life" without you bud, Keep it up!
There's nothing better looking than BRASS love it MATE keep it up BRASS and a night melt a few cold ones heaven
Love the vids, Big fan from New Zealand.
For thee algorithm !! 😎👍
I'll one also for the algorithm
I love how bullion goes out the doggie door and immediately goes to his sun spot and lays down. Lol
Every moment of this is perfection, can't stop watching.
Woah, pretty sure he’s married 😂
@@YangX.L. It's a bot profile
Love the copper melts when you polish the bars, but giving other metals some love is good too.
You are simply perfect, I can’t look away.
I love your videos i have been watching you a ton and your the only asmr channel i know that don't get me cringing tons
Hey Bigstacked...
An idea for the valve gate... give the indented area i high gloss polish and turn into 'Ancient Mirror' and either keep in vault or make it pretty for Mrs. StackeD...
Just an idea
I like the new rug in the vault
Здравствуйте, вы давно не показывали посылки от подписчиков. Я очень люблю смотреть когда разбираете посылки... 🎉
Is he on FB or Instagram or does he hav an Email or Gmail address? 🤔🤔🤷♂️
Приятно увидеть ру-говорящих на этом канале
I have watched your videos for about 2 years, I dont know why but I am hooked. I build and repair machinery from time to time and maybe one of those days I will cast some part for that purpose. Hi from Sweden.
Have a great weekend m8 ❤
Looking good. Like the cut saw, clean and easy. Look forward to the big guy. See you next week.
The ducks fly at midnight
Blue is a lovely color for upholstery.
Watch out for them DROP BEARS 🎉
I had a brindle frenchie just like yours, lived healthy life for 14 years. Frenchies are the best. Greeting from Finland.
I’m here, Happy Friday everyone 🤘🏻
Been watching every Friday for years. Love everything you put out man. Keep it up
Do a Steel Smelt but use Brad skull to make a Steel Skull....GREAT IDEA OF A CHALLENGE
Once again. 😅😂 the closet shots are pure joy. Thanks alot
As a truck driver in Arizona I can tell you few things are more annoying than stopping for fuel, drinks and a quick windshield cleaning, only to drive through a swarm of bees 7 minutes later. 167 honey splatters dry very quickly at 65mph (105kph) when its 115 (46c) outside. Thankful for good aircon in the Peterbilt!
"Wow, that brass valve melted like butter! It’s fascinating to see how such a strong metal can turn into liquid under the right temperature. The colors during the melt were mesmerizing!"
This is the classiest channel on RUclips.
Love watching your stuff. It's relaxing to just watch and not listen to others ramble on. Plus I watch for your pups as well. Cheers 🍻
Thanks again mate, I'm glad you enjoy the pups!👍🏻
Another great video! Love those chunky bars :-) so glad to see a big brass melt! Thanks for sharing with us, mate :-)
That is a beautiful song that plays when you do your bookworm. I hope you keep it in the line up .thanks for the video your awesome
Your channel is the most consistent watching I do on RUclips. My dad is a farrier/blacksmith, and I grew up watching him working in the forge, and your videos always remind me of that.
Awesome video mate, thanks for bringing us along!
Ingot and Bullion sure love that scratchy rug on the porch. Good pick :)
I love Friday for two reasons . 1. The next day is a day off. 2. New awesome video on this awesome channel
I went to Australia last summer and the birds were my favorite to watch. They're so crazy sounding and looking down there!
A great way to relax after a long day, love the melts! (the motor melts are my favourtite)
Thanks! I reckon the bigger the melt the better 😎
Another good melt. Waiting for the big boy one. Lots of copper there. Have a great day
G'day from the US from an ex-pat who used to live down your way. Always great to see what you are melting as well as a little of life back home.
Love your choice in music! Love Ingot and Bullion too!
As always a pleasure watching your channel thank you for sharing this very enjoyable video with us six stars brother
Nice job BS. Brass is pretty cool love the coin. Nice to see the puppies.
Mmmm, building the stack.
Looking forward to next week's video!
Thanks for doing some Brass! I hate how messy it is but love the Brass and Nordic Gold. Copper is also my fave to watch cool down in the molds
G’day, mate
How are you?
What a lovely brass valve you melted today; it looks like the metal was quite thick, you got a great amount of metal for your pile.
At 26:56, it’s dangerous to leave that piece of meat in the pan and walk away, as a crow might come and steal it.😂
A great video this Friday, I hope to see that engine melting soon; it’ll be a huge amount of metal.
Hope you have a really good week.
Cheers, Max
Thanks again, mate. You’re a champion. Yeah I didn’t walk too far from that meat. That’s for sure as the crows definitely do steal food and they stole another bag of biscuits off the bench the other day again that I put aside for the magpies🙄. Not to worry I just need to lock the biscuits away better that’s all.
Yes, the big Motor video should be out next week. It’s very slow process taking it apart but I’m loving every minute of it. Have a great weekend my friend👊🏻😁
Love the melts and the pups 😍
Long time watcher, first time commenter, lovely stuff man, thank you for everything.
Hey man, one fan from Spain here. I’m back after 2 years travelling around but I remember your friend dog, I hope he’s OK!!
nicely done thank you for sharing the adventure and information
love that new carpet in the vault
Die Anschaffung Ihrer Säge hat sich ein für allemal gelohnt!👍🏻👍🏻👍🏻
Really excited for the motor breakdown and melt 😎
a big sluice valve there ! the landscape it´s looking great with all the rains of lasts weeks ! love your workshop hope mine looks similar one day ! big cheers from Argentina !
that's a gorgeous saw, love the coolant dispenser
Hi, i never leave a coment becouse i wacth the videos from the tv, but always wath all the advertising 😊 love your channel and i love your monkeys as well ❤ Im really excitet for the giant motor melt 🎉 I sent a big hug from Córdoba Argentina
👊🏻😁
I always enjoy your vids. Melting, monkeys, birds, interesting food combos and choices. Nothing weird like here for the next 4 years...
I love that saw! I'm on the other side of the planet and we have exactly the same model in the shop at work. Different paint job and different brand, but from what I am seeing, exactly the same design.
It's a neat little thing 😊
I can't wait to see the motor meltdown. What a huge job!
comment for the algorithm these videos r great :] hi from canada
Thanks, I appreciate it 👍
Whoo hoo! Palm Harbor, Florida checking in!!!! We watch every Friday!!!!!
❤️❤️❤️❤️❤️❤️❤️
awesome special effects had me in tears, great job mate
I never get sick of your content ❤
Just found your channel today. Been watching all day on and off. Great stuff. Your vault is awesome.