Thank you for your educational videos. Hope your MF135 hydraulic DVD comes out soon. I have been waiting for years now. Good luck and keep up the good work. 👍
❤️👍Dear sir, thank you for your valuable technical information,,although I can't quite decipher your accent, perkins familiarity is helpful,,, horsepower losses are inevitable when very important measures are ignored😪,, many AD3 152 We used it from scratch (the trator) was tremendously powerful, but after the revision this power is not close to it!?, - - thanks again for your help👍--(Greetings from Anatolia) 👍
The only thing that seems a bit hit and miss to me is lining the E line on the fuel pump with the edge of the circlip? It assumes that the circlip was installed correctly with it's ends finishing in an exactly marked position and that it has not moved from that position? Otherwise it's a clear and well explained video.
Hello. well done. I have an AD3.152 engine. But there is no angle on the flywheel. there are holes.There are 3 small holes behind the big hole.What do these holes mean? The flywheel has an "I" mark when the pump is at the E mark.pump mark is above the timing box mark.5th gear is installed instead of 3rd gear.It was like this when I got it. How can I set the pump to its standard setting?
One of the best engines, ever. Easy on fuel and with proper maintenance will go on for a LONG time.
Probably one of the best engines ever made. Hardy as can be and so simple anyone could rebuild one
Thank you for your educational videos. Hope your MF135 hydraulic DVD comes out soon. I have been waiting for years now. Good luck and keep up the good work. 👍
❤️👍Dear sir, thank you for your valuable technical information,,although I can't quite decipher your accent, perkins familiarity is helpful,,, horsepower losses are inevitable when very important measures are ignored😪,, many AD3 152 We used it from scratch (the trator) was tremendously powerful, but after the revision this power is not close to it!?, - - thanks again for your help👍--(Greetings from Anatolia) 👍
Great to have some new content on your channel. Really interesting
Well informative video thank you sit
Of course!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The only thing that seems a bit hit and miss to me is lining the E line on the fuel pump with the edge of the circlip? It assumes that the circlip was installed correctly with it's ends finishing in an exactly marked position and that it has not moved from that position? Otherwise it's a clear and well explained video.
Question: I have seen "D3.152" and I have seen "AD3.152". What is the difference? Thanks to anyone who can enlighten me.
Hello. well done.
I have an AD3.152 engine. But there is no angle on the flywheel. there are holes.There are 3 small holes behind the big hole.What do these holes mean? The flywheel has an "I" mark when the pump is at the E mark.pump mark is above the timing box mark.5th gear is installed instead of 3rd gear.It was like this when I got it. How can I set the pump to its standard setting?
The old pre-combustion models sounded much better than the later direct injection type,as on the MF35 versus 135.
Stupiddeeeeesssssssssttttttttyouuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu
Is that a ce22438? And is a ce22488 the same engine?
Hello there i have a Ferguson tvo tractor i want to fit a tipping pipe is it possible have you fitted one before
Hello,
Where is the engine serial number? I have an AD3.152 engine on my 1998 Massey Ferguson 231 tractor.
How many HP is there in this engine?
47,5 km
@@ukaszszczepaniak5086 okk