How to: Angled Cuts Using EVA Foam & Pepakura Designer
HTML-код
- Опубликовано: 6 июн 2021
- This excerpt from the Full "Build Cosplay Using EVA Foam & Pepakura Designer" Tutorial explains how to asses the 3D model in the Pepakura Designer Software and point out what cuts need to be a Bevel/Angle. There are different kinds of bevel cuts as well.
I give a few examples on when to use this technique.
Once you get an understanding of the concept, you can apply this method to ANY Foam pepakura template and apply it to your own Cosplay Project. I always build every project the exact same way. Using these exact techniques.
If you'd like to watch the FULL "Build Cosplay Using EVA Foam & Pepakura Designer" Tutorial Video Click here: heroesworkshop.com/pages/tuto...
Special Thanks to my "Heroic Support" Patrons.
You help me continue to create cosplay content each week:
April “Black Regent” Guadiana
Justin Harrison
Nate Smith
Mathieu langlois
Rodrigo Cabrera
mezzondo
Anyone following these videos must do so at their own risk. If you are underage, please ask your parents for permission before beginning or to assist you in following the content shown on this channel. Heroes Workshop is not responsible for any harm or injury that may occur. Хобби
This excerpt from the Full "Build Cosplay Using EVA Foam & Pepakura Designer" Tutorial explains how to asses the 3D model in the Pepakura Designer Software and point out what cuts need to be a Bevel/Angle. There are different kinds of bevel cuts as well.
I give a few examples on when to use this technique.
Once you get an understanding of the concept, you can apply this method to ANY Foam pepakura template and apply it to your own Cosplay Project. I always build every project the exact same way. Using these exact techniques.
If you'd like to watch the FULL "Build Cosplay Using EVA Foam & Pepakura Designer" Tutorial Video Click here: ruclips.net/video/vRrfclFDiS0/видео.html
Can you do Falcons new mask to go with his new suit
Can you create a 3D template from scratch on Pepakura? If not, are you able to modify an already existing model to make it look original?
Wooo lots of Heroes Workshop vids popping up! Just the way it should be and remember folks, always watch your angles!
The more you interact with the video as a subscriber, the more they show up. 😎👍🏻
I'm just here to let you know your still one of the best foam workers on RUclips 🤘 and I'm still subscribed 👍
All hail the algorithm!! I disable my add-Blocker, I watched ALL the commercials adds, just to see this life changing video (#DeJotA Craft, if someone said it better use those/his/her words). I love watching Steffano create amazing thing from foam, whether he is using paperkura or not. I watch most of the videos more than once, so please please please (with sprinkles and cherry on top) You Tube and the all mighty algorithem keep suggesting me and others his awesome tutorial/build/show and tell videos. I do not care if they are new or decade old. I will watch than, Love them/ #like them and be thankful!
Amazing comment. Thank you, brother 😎👌🏼
Commenting for the algorithm
That Al guy is asking a lot. Thanks.
Algorithm check!!! 🙌🏻 Thanks for this one! 👍🏻👍🏻
Heroic Support 🙌🏼 This video is so helpful no matter how many times I watch it
Black Regent 🙌🏻
I started watching this yesterday, but ad i was at work i couldn't catch it all.
I just re-watched it just now.
I really appreciate the content in this video, it truly speaks to the viewer. I never would have considered alternating blades during a build, yet it only makes sense.
Bravo Stefano, this one is GOLD...
Just a idea you should invite to your show other builders, thank you for this video. Some of this cuts are a pain 👍
This is the example why we need you in RUclips. Thanks for all the great work since day one.
Thank you! I’ll keep posting the videos I had already filmed before I change to the new format soon in a few weeks.
There will still be tutorials but not as often. I’ll give tips and tricks in my vlogs to you still.
Hey :) Why haven't i watched this before? No matter, i'm doing it now. If people don't watch any of your other videos, they surely should watch this one (or rather the complete version you linked to). Great tutorial!
Thanks dude. 😎
i've watched the full tutorial several times, lots of tips and info and i just like to watch others build stuff
Thank you for all your hard work
What a great excerpt from a great tutorial.
Dude. Another quality and awesome video. Thank you!
I am getting ready to re-make my Goblin Slayer Helmet and this extremely helps. Thanks.
Forgot to comment for support on this vid i’ll do it now
Great content as always! Thanks for the shout out!!
Hey John! Did I say your name correctly? Rise-ner? Or Riz-ner 😎
Thanks for the upload, Stealth. I remember this from back in the day. Where'd those years go????
This one is from last year. I don’t want to show you the old ones you’re thinking about. Then we will feel really old. Lol 😎👍🏻
I love how detailed and informstive this is!
Watched the original video and this is great version showing a key component to foamsmithing. Glad to have a version like this for me to refer back to when I lose my way. Awesome work as always.
Thanks!
People always ask on how to do this.
It’s always been in the original full version but perhaps the attention span of others can be very short.
So, I made this to link people to it. See you next week with a real build tutorial 😎👍🏻
@@Heroesworkshop i referred to the original video many times while making the red hood helmet you did especially getting the eyes correct.
This tutorial helped me a lot to improve my crafting. So good 😊
Great video, Stealth!
This is a great video for beginners who will inevitably ask when and how to make angles. Eventually you stop even thinking about it and it just seems natural, but it’s a pretty big hurdle for beginners and I always get asked. I’ll have to save the link for this to pass to them. 👍
I posted this so that I can link to people whenever they ask for specifically this. Then they can watch the full tutorial from it.
Awesome, love the video! Glad to see you back
Next week’s video will be a helmet tutorial. Last one for a while until I can sort some stuff out with my workspace and other things going forward.
Like I have said before “you take care of your self and your true fans will be here!
@@philabot Thanks, Phil 😎
I'm gonna use this for my own Doomguy helmet
Good and helpful video my man!
Great tips!
Very impressive.
Awesome video once again
Did you get your pictures of Spider-Man?
Good stuff!
Sounds weird, but this is like the third or fourth time I watched this (originally watched the tutorial multiple times) but I always find something new, or I pick up on something I missed the other times I watched. Re-watching this has given me ideas on my Gray Fox neck piece that has got me depressed. Thanks for uploading this, it’s definitely helped me for the third....or fourth...maybe even fifth time lol
Glad it helped, man. I feel like people need to see specifically this, as it’s always asked but I don’t know if they go watch the full tutorial when I link them to it. It’s super difficult to film these in tandem with the software and building at the same time. So I’m trying to explain that it’s like hitting a nail with a hammer. It’s the same approach.
@@Heroesworkshop I would say that majority of them probably haven’t even seen your tutorial video which is why they ask, or they are like me just plain dumb lol. I have issues with scaling and I have watched your tutorials how many times now? 🤣🤣. Keep up the good work brother!!
Awesome 😎
For the algorithm! ✊
Nice!
Very informative. ty
Thanks for backing at the Heroic tier, Wayne!
NICE
Yep a nice vid again yay
Hey man.. just letting you know that this video showed up in a youtube front page but I didn't get notification that you posted. I wish I knew how to offer help and understood why youtube doesn't notify on some channels and does on others with the same notifaction levels. I know it's frustrating for you, but I felt you should know. That aside, this video is very well done and informative. Keep on pushin man.
Thanks for letting me know. It’s just usually because you commented on a past video. Once you interact, it helps videos show up again in your feed. It’s all I’ve noticed that’s actually working at this time.
@@Heroesworkshop Well then... :) More comments and watching full vids for you.
😎👍🏻
Nice... 😊 at the beginning of the video u did not throw away ur sunglasses 😱😅
This was just a technique video I wanted to share for now. I’m currently doing some things behind the scenes this week and sorting some things out with some client work at the moment. I have a helmet tutorial coming next week.
Steeeeeeeaaaaaalth!!!!!
That’s coming back in the next video. 😎👍🏻
@@Heroesworkshop heck yeah 🤙
What great timing!
Really appreciate this insight into manipulating foam as well as tips and tricks that I can employ in my own work, thanks for the great video!
One question I have though is do you have a particular thickness of foam that you like to use for your projects? and If so is there a reason you prefer it?
I'm weighing up the options and I have some 10mm, 5mm and 2mm stuff that I'm thinking of using from largest to smallest to layer on those finer details, but also trying to reduce weight as much as possible so I'd be curious to know your thoughts!
Onwards and Upwards!
I use mainly 6-8mm on almost everything.
Great tutorial Stealth, how often do you change blades when doing a full body armor?
Do you think laser cutting template pieces would improve efficiency?
I try to sharpen them when I can but I mostly buy them in bulk and change them out after every part I’ve built. It’s 5cents a blade when I do the math. Not a big loss. Laser cutting is great for cutting the template out for sure. I’ve seen people cut the foam out with a laser as well. I like to cut my bevels when I cut the piece out. You’d have to cut the bevel yourself after the laser cut. So technically a human is faster than a laser in this case for foam but laser is way faster to cut the template out.
😍😍😍
👍🏻👍🏻
Hi great vids, but I feel like I have seen this video before is this a repeat of one of your older vids?
It’s an excerpt from the longer tutorial. People always ask about bevels and angles but don’t watch the longer tutorial where it actually teaches you. I separated this so that I can link them directly to what they’re asking about.
Please do a cosplay helmet for Helldivers 2 ❤ will get a ton of views as everyone is racing to make the cosplay
I will make it soon.
For the algorithm! Maybe things are on a upswing here, my feed has several your videos within a lil roll of the mouse wheel! Bro you see the trailer for Snake Eyes movie?
Thanks for keeping an eye out.
It’s because you’re subbed and you’ve been interacting with videos.
The more you interact with content, the more it shows up to you. That’s part of the “game”. I have seen the trailer. I love snake eyes. I’ve always wanted to do his GIJoe Annihilation Suit. That’ll always be my favorite though.
Dude a snake eyes helmet tutorial would be Boss
👊
👊🏻
What is that helmet’s name ??
Thank you for the really useful information! How have you been doing with all this RUclips crap and life?
I’m making some changes to the format soon based on what I said in that video. I’ve been okay this week. I’ll start working on client projects also soon. So you’ll be seeing my personal projects in the Vlog format that I was talking about in the coming weeks more than tutorials.
My personal projects will allow me to go all out and make cooler things in the end, while keeping sane and having fun in between client work to make a living (which I don’t really like doing.)
Thanks for checking up, Ethan.
@@Heroesworkshop you’re super welcome, that definitely sounds like changes were made, I’m really hoping it all works out though and that you can still continue doing what you love. You’re doing super amazing though, keep up the great work!
@@ethanshockley4196 I’ll definitely adapt and turn this into a positive like I’ve done in the past. Thanks again, Ethan.
This comment is a way o appreciatiom of the GREAT CONTENT ON THIS CHANNEL. you read me youtube? THIS IS A LIFECHANGING CONTENT FOR ME THAT I THINK EVERYONE IM THE UNIVERSE SHOULD SEE. very very helpfull.
It did change my life tho, it lead to a path where I eventually realized that what I really wanted to do with my life was more on the lines of engineering, not psychology and now I'm on my way to get that nice and shiny bioengeneering degree
Sorry, for using your words!
"shweeet" - Eric Cartman
After I've done some slight bevels I have some frey left on the seam sometimes..what grit should I sand these down with? I use foam from tnt cosplay supply, I don't think it's hd foam..does that even matter?
Make sure you’re working with a sharp knife at all times.
@@Heroesworkshop yeah I alway forget to sharpen my blade and I'm really bad about having to recut a piece if I can possibly finagle into fitting but then I always get my freys which coulda been avoided if I sharpen my blade.. it's a vicious cycle my friend lol
Sharp blade always
@@Heroesworkshop You the man Stealth. You are appreciated here sir 🤘 can't wait for the next upload
Comment for engagement
😎👍🏻
do you only use pepakura designer
No
what else do you use@@Heroesworkshop
I can't even cut a good and even straight line most times lol
Lol. Keep at it, buddy
health man .
@@Heroesworkshop my idea hero. just so .
@@davidrigelsky5094 Oohhh I see! Cool
I don't know what you'd think of this idea, but would it be worth the effort to put together a package of beginner, intermediate, and advanced tutorials from your past videos to sell on DVDs or as downloads from your website (or would that be like shooting yourself in your financial foot?).
I wouldn’t worry too much about finding solutions. I can’t invest in anything anyways. I have to work on client projects. No time for all this stuff on the hope it works anyways. I got things to build. 😎
I have a question about your Halo Infinite armor files. Is there any chance that you're going to change the files to be more accurate when the game comes out, and send the updated files to the people who’ve already bought it? I would like to know because I recently bought the files and the files look similar to the ones inside the Fortnite game files which are really inaccurate. The differences are easier to see in the new Infinite reveal that came out today during the Xbox E3 Infinite section ( ruclips.net/video/wDZ-9B6hX5A/видео.html ), but they can even be seen on the toys (it's even missing details that the very inaccurate fortnite files have, like the vents in the back, an indent on the forearm, and a protruding piece in the center collarbone). I’m eagerly awaiting your response. Also, congrats on 117k subscribers, Master Chief would be proud.
@@Heroesworkshop Sorry if it sounded kind of rude, I meant it as the Fortnite ones were inaccurate, not yours. My Chief build was originally going to be my first ever build and I was just looking for any way to make it easier for myself. But, I’ve decided that I’m going to do some small builds and keep watching your video tutorials to learn the techniques better for my Chief build. I love you vids. Keep doing what your doing👍
Good idea. Learn the techniques and do smaller builds before you overwhelm yourself with this project. Then apply the techniques to the master Chief templates.