I have a 2006 Lexus IS250. Hard downshift into 1st and hard/delayed downshift into 3rd and 4th too. I'm very interested in shipping you my ECU for a repair. Let me know how to proceed! Great work man. I'm glad I stumbled upon your videos.
i have a gs300 2006 awd 286K km that just started downshifting really harsh from 2nd to 1st. i drove like this for past 3 days and preventing the downshift by neutralling tranny before stops. I just got a check engine light today and a P0756 code which talks about tranny solenoid b short or stuck. ECM needs repair from what i understand
I heard it was the ECM not the ECU that needs to be sent in for repairs - I read on Lexus forum that everyone had the same problem as me ( down shifting bucking from 3rd second and first gear ) only down shifting- and everyone sent in their ECMs to SIA and fixed the problems - I have an 06 Lexus gs430 with no check engine light on and it started bucking on the downshift kinda hard this morning first time experiencing and thought it was time to do tranny flush or service but seems like everyone that did that had same problem and ended up sending in the ECM
First off SIA is a complete joke! Ecu and ecm is just terminology they are the same thing! Why do I say SIAs a scam you ask? Well they tried to copy my repair but don't have the software to flash it as it was built by my IT guy and I. I've had to fix several ecus from SIA with in just the last month and even more over the past 5 year's. For more information feel free to email me @ Salesrmstx@gmail.com
This morning turned on the car and for about 30 seconds changed gear into drive and noticed the hard jerk and also into reverse and park- not so much anymore after it warmed up- I drive it around fine - the gears shift smooth upwards no problem 20mp-60mp - I just noticed bucking when I slow down to a stop on lower speeds
@@relentlessmotorsportstx397😬 I’m glad I hit you up for being calling SIA- I kno all the Lexus posts are years old so that must of been while back idk how they are now - can I send you email so I can get my ECM sent to you please?
no matter what do NOT tranny flush at all, if you want just do a fluid change. (remove tranny pan and replace any fluid that came out). a tranny flush with alot of mile will cause metal shaving to clog up small passage ways causing shift slipping
Brother I have a 2006 Lexus is250 transmission work perfect but after driving for 1 or 2 days shutting 3 code p0761 all same codes! Stock in 3. But I just reset ecu start work good again. How much do you charge to fix the ecu.? Where I can send it to you
Hello, I'm from Poland, I have a problem with leather, it shows error P0980 and P0977, i.e. solanoids. I checked the solanoids and they are all working, can the cause be in the ECU?
My 2010 lexus ls460 is slamming into gear 2 or 3 times some days it won't dot it at all it started about 3 weeks ago went to Toyota they can't find anything no engine codes or nothing
@@relentlessmotorsportstx397 then when I shift to reverse sometimes run goes up and its jumps in to reverse hard ot just started about 3 weeks ago 194,000 miles never had any major issues its a good car I just been trying to figure this out since it started
@@relentlessmotorsportstx397 ok thank you sir!! You really helped!! Is that something you do? I'm interested. I found a place called SIA electronics that rebuilds too
Hey, I have an ls430 2005, and I started experienced an extremely strong down shifting from 3 to 2 and 2 to 1 and 5 to 6 to od, those shifts causes the whole car to pull you forward, no cel no lights and nothing at all, could it be that issue, is there a way to confirm its the ecu before sending the ecu to fix thanks!
I could be as these cars are getting older, I'm staring to see more and more issue becoming more prevalent. This fix is a software flash fix. To get the software to work a couple of the smd components must be replaced or removed temporarily. I'd more then happy to look it over for you
I have a 2006 Lexus IS250. Hard downshift into 1st and hard/delayed downshift into 3rd and 4th too. I'm very interested in shipping you my ECU for a repair. Let me know how to proceed! Great work man. I'm glad I stumbled upon your videos.
Please email me @ Salesrmstx@gmail.com
i have a gs300 2006 awd 286K km that just started downshifting really harsh from 2nd to 1st. i drove like this for past 3 days and preventing the downshift by neutralling tranny before stops. I just got a check engine light today and a P0756 code which talks about tranny solenoid b short or stuck. ECM needs repair from what i understand
Please email me at Salesrmstx@gmail.com
How do you learn how to do this
Oh my God just what I was looking for how much to rebuild the ECU 04 gs430
Please email me at Salesrmstx@gmail.com for more information or dm me on Facebook @ Relentless Motorsports TX.
Can I get an price idea ? Or should I email you ?
@@NXCboards email me at Salesrmstx@gmail.com
I heard it was the ECM not the ECU that needs to be sent in for repairs - I read on Lexus forum that everyone had the same problem as me ( down shifting bucking from 3rd second and first gear ) only down shifting- and everyone sent in their ECMs to SIA and fixed the problems -
I have an 06 Lexus gs430 with no check engine light on and it started bucking on the downshift kinda hard this morning first time experiencing and thought it was time to do tranny flush or service but seems like everyone that did that had same problem and ended up sending in the ECM
First off SIA is a complete joke!
Ecu and ecm is just terminology they are the same thing!
Why do I say SIAs a scam you ask? Well they tried to copy my repair but don't have the software to flash it as it was built by my IT guy and I.
I've had to fix several ecus from SIA with in just the last month and even more over the past 5 year's.
For more information feel free to email me @ Salesrmstx@gmail.com
This morning turned on the car and for about 30 seconds changed gear into drive and noticed the hard jerk and also into reverse and park- not so much anymore after it warmed up- I drive it around fine - the gears shift smooth upwards no problem 20mp-60mp - I just noticed bucking when I slow down to a stop on lower speeds
@@relentlessmotorsportstx397😬 I’m glad I hit you up for being calling SIA- I kno all the Lexus posts are years old so that must of been while back idk how they are now - can I send you email so I can get my ECM sent to you please?
no matter what do NOT tranny flush at all, if you want just do a fluid change. (remove tranny pan and replace any fluid that came out). a tranny flush with alot of mile will cause metal shaving to clog up small passage ways causing shift slipping
Is the Ecu in the hood or near the passenger glove box?
It's under the hood.
@@relentlessmotorsportstx397 how do you unplug the wires without damaging them?
@@nalsra0 squeeze the little lock tabs and pull up on them
@@relentlessmotorsportstx397so it’s just plug n play then?
Can I put a 2001 Lexus ls430 ecu into a 2006?
@@gl2gv no
My car hard shift with I break and it struggle when I gas
What car is it? Feel free to email me and let's talk about how to fix it.
My email is Salesrmstx@gmail.com
Hallo i have a 3uz 6speed but mine make a noise when i drive it and rive it in park do you
No I didn't
Brother I have a 2006 Lexus is250 transmission work perfect but after driving for 1 or 2 days shutting 3 code p0761 all same codes! Stock in 3. But I just reset ecu start work good again. How much do you charge to fix the ecu.? Where I can send it to you
Please email me at Salesrmstx@gmail.com
@@relentlessmotorsportstx397 I didn’t already
Hello, I'm from Poland, I have a problem with leather, it shows error P0980 and P0977, i.e. solanoids. I checked the solanoids and they are all working, can the cause be in the ECU?
Yes it most definitely can. By the way thanks for watching my video and reaching out to me!
My 2010 lexus ls460 is slamming into gear 2 or 3 times some days it won't dot it at all it started about 3 weeks ago went to Toyota they can't find anything no engine codes or nothing
@@christophermagee9079 I can fix it
@@relentlessmotorsportstx397 what do I need to do
@@relentlessmotorsportstx397 then when I shift to reverse sometimes run goes up and its jumps in to reverse hard ot just started about 3 weeks ago 194,000 miles never had any major issues its a good car I just been trying to figure this out since it started
I have a 05 ls430 it on jerks when shifting into first. Is this the same issue? Or should i do a flush? It has 200k miles
No lights on dash or anything
Same issue
@@relentlessmotorsportstx397 I'm currently in Michigan is it safe to drive back home to Texas I'm nervous but have to get back
No you'll damge the drive line.
@@relentlessmotorsportstx397 ok thank you sir!! You really helped!! Is that something you do? I'm interested. I found a place called SIA electronics that rebuilds too
Hey, I have an ls430 2005, and I started experienced an extremely strong down shifting from 3 to 2 and 2 to 1 and 5 to 6 to od, those shifts causes the whole car to pull you forward, no cel no lights and nothing at all, could it be that issue, is there a way to confirm its the ecu before sending the ecu to fix thanks!
I could be as these cars are getting older, I'm staring to see more and more issue becoming more prevalent. This fix is a software flash fix. To get the software to work a couple of the smd components must be replaced or removed temporarily. I'd more then happy to look it over for you
Hey bro do u rebuild the ecm
Obviously I do hence the vidoe
does this help with sluggish shifting, gear slipping, and hard upshifting???
This could be part of the issue but not the full issue
..love you too bro haha. But I just messaged you on Instagram about this!
I got it check my ig for a response