Why The BMW B58 Is So Good
HTML-код
- Опубликовано: 31 июл 2024
- There are nice engines and there are terrible engines by BMW. This B58 is a fine one and although its long-term reliability is to be shown in the future, we are starting to get the picture of what the B58 is capable of. There is a bunch of models powered by the B58 and people have been tuning them everywhere. Let's find out how good it is and why.
00:00 Intro
00:31 Base design
01:06 Internals
01:28 Head details
02:10 Intake, fueling, exhaust
02:50 Turbo specs
03:29 Valvetrain & accessories
04:05 Tuning & modifications
04:53 Technical Update
05:33 Accessibility
06:00 S58 brother
- Vlog -
/ @visioracervlogs2741
Cool free crypto game:
rollercoin.com/?r=kx6olcdp
- Support -
/ visioracer
Monero (XMR): 4294E5emhNXVhM1odiiwLFQTq6xcK7y6Z3WYt3fEUan9UqnUTvNX23tGzdgkgksx4n23na1o2rRzS4L6xLQ6RopF6q1MLAd
- Disclaimer -
This video is fair use under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work.
- Credits -
“BMW M240i - Motion” by Kropa & Reimann Media GbR
vimeo.com/347976537
“INSTALLING MY NEW B58 ENGINE INTO THE 340!” by Thic Whips
• INSTALLING MY NEW B58 ...
“I Bought an F30 BMW 340i” by NW Auto
• I Bought an F30 BMW 340i
“Come Look Inside A BMW Engine! Full Tear Down” by Vehicular DIY
• Come Look Inside A BMW...
“2020 BMW Engine - PRODUCTION” by Car & Performance TV
• NEXT LEVEL BMW ENGINE ...
“BMW B58 Raw Sound | Night Driving” by Xandr Motorsports
• BMW B58 Raw Sound | Ni...
“Opening our B58 Engine from our A90 MKV Supra!” by Titan Motorsports
• Opening our B58 Engine...
“Inside the BMW B58 with surprise failure! - Hack Engineering B58 Build Episode 1” by Hack Engineering
• Inside the BMW B58 *wi...
“Making of BMW S58 Engine (powering the X3M, X4M and G80 M3 / G82 M4)” by BIMMERPOST
• Making of BMW S58 Engi...
“2020 Supra B58 Engine Teardown - First Look - Better than the 2JZ?” by PapadakisRacing
• 2020 Supra B58 Engine ...
“BMW B58 Valve Cover Gasket DIY” by Vehicular DIY
• BMW B58 Valve Cover Ga...
“Eisenmann quad race exhaust BMW M140i B58” by Taran Singh
• Eisenmann quad race ex...
“BMW 340i ‘AWE TUNING’ EXHAUST PURE SOUND” by Ludjgdrkp
• BMW 340i ‘AWE TUNING’ ...
“BMW 340i Touring B58 Stage 2 NVM” by NV Motorsport UK
• BMW 340i Touring B58 S...
“BMW 340i | B58 | BMS JB4 + AWE Exhaust + Methanol” by CntryClub007
vimeo.com/347981794
“BMW M140i test” by Greg Rust
vimeo.com/410453219
“BMW M140i (MT) + LSD: engine + exhaust sound, revs, powerslide” by DrivingCars
• BMW M140i (MT) + LSD: ...
“BIG TURBO install on an F30 340i B58 BMW (Pure 800)” by Kies Motorsports
• BIG TURBO install on a...
“BMW B58 RaceChip Tuning Installation 340i 440i 540i 640i 740i X3-X7 Z4 40i” by RaceChip Installation Videos
“Common Problems With The BMW N54 Twin Turbo Engine.” by Will’s DIY
• Common Problems With T...
“This Classy 2018 BMW 740i is for sale! Review w/MaryAnn Vehicle listing: AutoHausNaples.com” by Autohaus of Naples
• This Classy 2018 BMW 7...
“BMW X3 M40i G01 - upgraded exhaust sound” by Pops & Flames
• BMW X3 M40i G01 - upgr...
“BMW 340i DYNO 410RWHP- B58 Engine” by B58
• Video
“BMW S58 Engine (powering the X3M, X4M and G80 M3 / G82 M4)” by TopSpeed
• Video
“Confirmed! BMW M4 S58 engine with 1.000+ bhp!” by Red Bull Driftbrothers
• Confirmed! BMW M4 S58 ...
“BEST SOUNDING G80 M3 INTAKES? (Burger Motorsports Cold Air S58 Intakes)” by Thic Whips
• BEST SOUNDING G80 M3 I... 
Авто/Мото
![CENTRAL CEE - GEN Z LUV [VERTICAL VIDEO]](http://i.ytimg.com/vi/VIbidJm9q34/mqdefault.jpg)
In stock form, the B58 is a gem of an engine. It's super smooth, has torque for days, revs quickly, and gets great fuel economy when not pushing it. Can't speak to the longevity of it, but in terms of operation, it's an absolutely brilliant motor.
Considering what it is made of, the tuneability and overall feedback of reliability so far, my predictions are that the engine will soon have a legendary reputation for reliability, up there with the M50/M52, N52, K series, 2JZ, Cummins 5.9 1.9tdi, Om606/OM617 and also the 3 cylinders found in the Geo metros/Suzuki swifts.
@@Josh-qm4rb Doubt that, it's a BMW lol. In the last two decades they have made some of the most unreliable cars on the road.
I'm not just saying that for fun, the statistics don't suggest that they're shit, they prove they're shit lol. To suggest that the reliablity of a modern BMW motor is "legendary" and up there with 90's Toyota motors is quite frankly hilarious.
"Considering what it's made of" LOL Too much plastic is the answer!
@@addz17 I was hypothesising about the B58's future status and yes I do know that BMW has made some terrible engines in the past, but they have also made some very good engines.
@@addz17 the B58 has been around for quite some time ? idk why jdm fanboys like to generalize a car manufacturer by their engines (or maybe checking oil every 5k miles is not in their book) like , toyota putting in a BMW engine literally tweaked to nothing and slapping it on a new chassis was pretty much funny imo ... they opened up the motor to see it actually met their standards of quality and shoved it in their own car like what other particular manufacturer does .
What us this robotic voice?
It should be mentioned that bmw did not put the timing and oil pump chains in the back close to the flywheel to annoy owners, but to get rid of harmonic issues with the long crankshaft, which should help the engine live longer at high rpm
Sure.... Its not like other inline 6s have been all forced to do that.
What strain of marijauana do you take Laurean?
The time chain is rear in the engine i think
@@jason.arthur.taylor OP isn't wrong. Our training material even states that having a timing chain in between the 2 rotating forces of the engine (crank and flywheel) reduce/balance harmonics and reduce timing chain replacements. 5yrs at a dealer and none of us there have had any timing chain issues on any of the B series engines
@@Heliore Thanks for your info 👍
Probably the best six cylinder engine I have ever owned. Gorgeous sound, smoothness and responsiveness.
how's reliability been?
@@JimmyDean404 Perfect up until I sold it
@@martinloney6322 then why did you sold it? 😂
@@roznegow4531 Because its lease expired.
As a BMW tech I can confirm, these engines are damn great. Just did a heat management module on a 440i today and a mechanical water pump on a G05 the day before. Super easy engines to work on, very reliable thus far, and capable of taking a lot of abuse.
@@davidrx795I think it’s safe to assume so. Only Toyota would come up with something like “hey let’s use this diesel engine, lower the compression, and add spark plugs” and only BMW would say “okay sure, and we’ll make it fast”
@@Dingbobberin ur opinion what engine is cheaper to maintain a n55(435i) or a b58(340i, 440i)?
just wait until you have to do, I Timin chain on it.
My g05 x5 had to replace water pump at 16k miles and now has engine knock when cold at 19k ….. waiting on dealer to diagnose 🤦🏻♂️ bullet proof they say 😁
The straight six has always been the strength of BMW.
The crankshaft is easily 1k horsepower capable, as Frederic Aasbo, FD driver driving a A90 Supra, uses a stock crankshaft. It was a stock block and crankshaft built by Papadakis Racing, which was one of the clips shown in this video.
I’ve owned my 2018 340i Xdrive since 2018 & it’s had 0 issues and is at 87K original miles and counting. If y’all are needing proof of this, I have it. I’ve kept it in its stock form & I assure anyone doubting this engine can put all those doubts to rest. The only thing I’ve done is general maintenance & a coolant flush. It’s been bullet proof. Even went through 3 wrecks, got it fixed each time & still has not a single mechanical issue. At first I thought it was a piece of shit, and now over time has proven to me maybe it was the car for me all along & I doubted it too much. Obviously after hitting 100K + we’ll see truly how great this motor either is or not. I’ll keep you all posted. Have thought about posting high mileage b58 content for some time especially since I’ve tried to take great care of my 340 in the 4 years I’ve owned it.
3 wrecks man?? dang you have bad luck or drive like a typical BMW owner 😉
@@jeffkelly9197 no blinkers ,overtaking 100% of the time
@@sawsinit544 blinkers can't keep up with BMW engine anyway so would just confuse others
I subscribed to you in hopes that you will post on the b58 high mileage
Any update on mileage and repairs?
Amazing engine. I'm driving a M240i with upgraded turbo and fuel system running over 600hp/800nm as a daily. Very fuel efficiënt for normal driving and never boring when you step on it. So far after 3 years. 0 problems. People who buy this engine and tune it will hopefully care more for maintenance , so you will never see many issues.
which Downpipe and how many psi?
@@antonyr3946 Catless downpipe / 1.6bar on 102RON
@@antonyr3946 ruclips.net/video/FOvBQrGDjEw/видео.html
Get rid of it soon
It's going to cost you a bomb when she blows .
I immediately have to agree with your comment about peak horsepower not being the most important thing in an engine or the car it's strapped to. I don't understand the obsession about a car that can only go fast in a straight line.
Or only makes its power high up but the gearing and weight isn't suited - like a lot of diy custom tuners
haha, yeah, as if all them got cvt and perfect coolant
A car that only goes fast in a straight line is a US specialty. Even now several of their really fast cars are only any good on straight roads (Hellcat etc) Anyone can build a car like that, the trouble comes with tight bends and corners familiar to European drivers. That is why Europeans have no interest in the majority of US designed and built cars (that and the terrible build quality!)
@@davekennedy6315 You guys have been saying that for years, do you ever change your tune? Go ahead and talk up the build quality of your interior parts, at least we don't make things like engine components out of shitty plastic that is guaranteed to break... 🤣
@@rustyjeep2469 Instead you make the entire interior out of cheap plastic and fail to make decent suspensions. 😂
BMW inline-6 are simply awesome! I would love to see a video about the legendary inline-6 engines of the E46. M52, M54, S54 and P54. I drive a M54B22, and maybe it's slow, but it makes me so happy!
I have 46000 miles on my 2020 supra, it' got a tune running 22lbs of boost along with a downpipe and intake from about 7k miles, and running water meth injection, and e60 since 15k miles making over 500whp driven through long cold Michigan winters that can regularly get in the negatives (farenheit) and occasionally double digit negatives along with feet of lake effect snow, along with relatively hot summers regularly 90 degrees (farenheit) overall the car has been completely bulletproof with zero issues and I would definitely recommend any car with the b58 and especially the newer models with the TU fuel pump that can flow enough volume for ethanol mixtures
Damn someone’s getting their money’s worth 😂🔥
The plastic engine is only a year old ffs... it needs a bit more time and heat cycles before you can watch it all disintegrate.
@@addz17 Huh?
46000 miles in 2-3 years MODDED to hell since 7k? You sir are my hero.
@@stevem2323 he’s one of those “2jz best engine” ppl, dont bother
Fantastic video. It's easy to tell that you did a ton of research and homework before making it. Thanks for the info!!
That is a lot of boost for that compression ratio. Call this an intermediate engine as the next version will have to add port injectors to keep intake ports and valves clean.
Not necessarily about the compression ratio. The variable cam timing adjusts the dynamic compression of the engine and the sophisticated knock control helps with keeping uncontrolled combustion events down.
@@hoost3056
Nice then. Reying on fail prone electronics to keep it from self detonating is a foolish design. Electronics are always the 1st thing to fail in a car!
As far as I know, heavy builds are ditching the DI and installing a port injection.
@@VisioRacer good plan!
DI has advantages, but port injection keeps engines alive. A combination like Toyota uses seems to be a happy medium.
@@VisioRacer, Stephan Papadakis did just that when he built his B58 for his drift Supra. It went over 1000 HP.
Reason he did that was, besides not actually using the direct injectors, they were destroyed during dyno sessions.
Going B58 after 15 yrs of unboosted V8's, it takes some time to get used to driving with a sea of torque in low RPMs. I still don't like it ocmpared to naturally aspirated engines, but it makes for a pleasant flexible engine with - indeed - excellent MPG for its HP output. I essentially went from 18.8-23.5 mpg with the N62 V8 (4.4l) to 23.5-30 mpg with the B58 (not the TU1). Not the V8 sound I was used to but in sport modus it makes a decent soundtrack.
*torque
*enough horse power
*decent mpg
If durabilty also checks out, it's a winner.
Are those US or UK MPGs? Because I'm getting 30-38.5MPG on my N55 powered M135i.
@@o0julek0o Google calculated US MPG for me. In Europe it would be between 10-13km / liter.
@@WekkelEkkel ah ok, so in terms of UK gallons, you’re doing about the same as I do with your B58. Did you go with a manual or automatic?
@@o0julek0o undoubtedly the 8 speed ZF automatic which is great.
@@WekkelEkkel Are you a sporty driver or more like a relaxed one? because 30 mpg is great, even if you go slow.
Inline 6 is what BMW really know best. They should probably stick to it and do away with V8/V10 & especially their Inline 4 units.
Great content VR 👍
What's wrong with their four bangers?
@@rustyjeep2469 terrible...60-70k its trouble from there on.
@footballcoreano wtf are you on about, they don't make a V4. Utterly clueless 😂
i heard their v12s are pretty decent aswell
@footballcoreano The day BMW makes a V6, answer me
Thanks for the feature!
It is essentially a modernised 2JZ! And the sound reminds me of an AMC 4.0 below 6000rpm except with an incredible rumble! Ive seen aftermarket exhausts that have made it sound very similar to an RB or the original 2JZ itself!
BMW made inline 6 engines way before the JZ so the JZ and RB came after BMW with their inline engines
@@chadkennedy8675 Toyota has been making straight 6 engines since the 1930's. Both Toyota and Nissan had made many famous performance inline-6 engines before the JZ and RB. The only reason the B58 is good is because of Toyota's input. The engine had to meet Toyota's strict quality control. During testing Toyota sent thousands of B58 parts back to germany with notes for improvements.
@@electrikoptik BMW started building inline sixes in the 30’s, too; maybe even beating Toyota by a couple of years. The Toyota straight six was an identical knockoff of the Chevy Stovebolt 6, parts could even interchange.
@@davej6222 Factually incorrect, the Stovebolt 6 is similar to F series engines as used in early Landcruisers. None of the parts are interchangeable though the I-6 engines do look similar. Fixtures and fittings are a off position compared to stovebolt 6.
The JZ line are NOTHING to do with the F-series designs as its immediate successor was the M-series.
@@davej6222 wile BMW were making na junk average stuff..Nissan and Toyota were making 2jz and rb motors 👍👍👍
Happy owner of a M140I with this engine, pure pleasure for a decent price tag.
Visio you make the best techinical videos on engines .
Love your work
1:37 A bug is very interested in the engine as well! :0 xD But man, what a nice engine! Love these overenginered engines.
Besides the shortcomings of the location of the cam timing and oil pump chains, the plastic parts breaking down with time, and no port injection to maintain clean intake ports, the B58 is an engine with very high tuning potential.
Regular oil changes will greatly reduce chances of VANOS and Valvetronic failure, and a catchcan will mitigate intake port carbon buildup.
@Automobile Addict, there are far more worse European engines. No engine is perfect. Objectively, many engines from many manufacturer come close to perfect. Which has their fans. Even those considered "unreliable" by many are seen as challenges to improve them by many. Take the Subaru boxer and Mazda Wankel, for example.
But even the LS engine isn't bulletproof if you neglect its maintenance or push it beyond what the parts are capable of handling.
Like I said in a previous comment, these engines don’t have carbon build up due to the way their PCV system works. High mileage B58s have been opened up to find zero carbon build up on the valves. Also given that it’s an inline-6 you should never have to service the timing chain or guides for the life of the car.
Always warm the engine, bmw oil only, shell 93 and it runs forever
@Automobile Addict The actual engine reliability should be fine. Toyota corrected BMW's mistakes. Check out this video on the Z4/Supra - there's a very interesting quote from one of the main engineers from BMW on Toyota's approach to doing things. As for the ancillary components, plastic crumbles over time so replace with metal parts where possible.
👉 ruclips.net/video/_jbyzmtgU_0/видео.html
@Automobile Addict I always warm up my B58. If you don't you deserve something on it to break down.
Thanks for featuring my car at the end.
I look forward to getting my hands on a B58 this Summer.
Proud B58 owner ❤️
Thanks for putting us in the video 👊🏼👊🏼
Drove a 340i half an hour ago. The pull that I experienced from 45 to 115 in full throttle was the most eye opening experience I’ve had in a long time. Still can’t believe how powerful this engine is in stock form! ❤UNREAL!!!❤
Please make a Video about the B57, just please! It's so lovely
Glad to see you cover this engine! It's an absolute gem, even when paired to a 6-speed like my 240
Quick thing to be noted: the original build B58 had the 6-exhaust port head (I could literally take a picture of my engine bay to prove this.) TŪ1 brought the headers-in-block arrangement, for efficiency. The engine warms up quicker when the exhaust gasses are heating up the head, improving cold-start emissions. ~The compression ratio is unchanged as well, still 11.0:1. 10.2:1 is the N55 ratio.~
EDIT: I was half-wrong about compression ratio; B58B30M1 (335hp TÜ, as found in 540i, 740i etc) remain 11.0:1, while B58B30O1 (382hp TÜ found in M340i, M440i etc.) have dropped down to 10.2:1.
Can you show me your source of the compression ratio? As far as I can find, the 2021 model does have the 10.2:1 compression ratio
www.toyota.com/content/ebrochure/2021/gr-supra_ebrochure.pdf
@@VisioRacer Wow, I thought I knew everything there is to know about these engines. I was half-wrong; B58B30M1 (335hp TÜ, as found in 540i, 740i etc) remain 11.0:1, while B58B30O1 (382hp TÜ found in M340i, M440i etc.) have dropped down to 10.2:1.
Only the supra had the 2 port, all bmws had the 6 port, Toyota switched to the bmw 6 port
@@TheFanatic340 im pretty sure that depending on market and model year, bmw had the 2port too
@@E9X330 definitely did not
Intake Carbon is pretty much a non issue now. Pcv ports aimed at each valve along with creative injection timing strategies. They solved it years ago. Even mini n14 engines with new software after cleaning. Rarely need it done again.
Hopefully one day I get to see one on the Vortec 4200, the GM inline-6. 🍻
Love this guys voice! (Not being sarcastic) I think it makes it fun.
And remember that this engine is part of the modular engine family. Meaning that you can get similar architectures on 4 and 3 cyl engines (cheaper ones).
The N54 , N55 and B58 sounds amazing
Like the B58motor, LOVE the S58 motor even more!
Can you talk about the Volvo Modular engine family, especially the B52 line? Turns out white blocks have forged internals and people aren't really going and having fun with it.
The only off putting thing for me is the fact that they put the timing chain on the back. Meaning changing it is an engine out job. And luckily the I6 timing chains aren’t usually a huge problem in BMW’s but if it DOES ever need to be replaced years down the road, good luck to you
We have an e46 with 370,000km on it with the original chain the guides are a bit worn but it still runs and drives perfectly
One of the best engines right now
Did they fix the valvetronic motor that was faulty on low mileage in the N55 engines?
Superb buddy ❣️❣️❣️❣️❣️🤘🏻🤘🏻🤩🤩😘😘👍🏻
BMW Inline 6s are the german 2JZ I see nobody else among the german brands making anything comparable.
Update: So far nobody here has any serious issues with them. Ive seen one in the shop because a piston broke apart below the rings due to very bad knocking presumably. It looked like a typical failure you see with too much boost/very bad knocking. Car was tuned to 400hp so excessive boost wasn't the problem.
Engine went back together only needing a piston everything else was in great condition.
Techs said this engine was significantly beefier and has less wear than the N55 they usually have to patch up 😅
The Mercedes-Benz OM606 is considered the German diesel 2JZ. Great for when you want a high revving equivalent to a tuned Cummins 6BT without its high complexity and huge size and weight.
The VW EA888 (2.0T) can be boosted comically high on stock internals. It's not an inline 6 but it's still a very strong powerplant for it's size.
2JZ and RB is still better
@@evolife1044, no doubt. Nissan has restarted making new RB26 engines as part of their heritage program. I don't know if Toyota will do the same with their 2JZ.
Just don't count out newer engines out yet. Honda B-series builders said the K-series were trash when they first came out. Now you can K-series swap (almost) anything.
@@JoseRivera-ym3wj 2JZ is a copy of the M104 Straight 6 Mercedes engine.
I just got this feeling, with time and milage we shall see a lot more engine out repairs due to that timing change re-location.....only time will tell.
I got a 2020 m240ix and love this engine/car. 14k miles so far and no issues. 5k liqui molly oil changes. Dinan mid pipe is all I have since its my first German car and was afraid about the talk of unreliability. Now I want to do a stage 1 dinan tune, any recommendations? I’m a noob, do I need to upgrade anything ? What about stage 2? Is adding a down pipe part of doing a stage 2 ?
You would enjoy looking at the wealth of resources kern417 has on his channel
I'm currently on BM3 stage 2, but I have complete peace of mind with the B58 - sounds amazing, brings lots of power, and can be economic when needed.
Hey bro. I’m looking into the same car same tune, how’s it been realibly
@@f22_b58 rock solid - these engines are made for tuning
@@f36_garage71 Damn bro that’s so sick okay! I was gonna save up and go with a b9 s4 or maybe just get a b8.5 s4 but imma go with a 340i I think… Or do I spend a little more and get a m240i, I hear those are better but I’m not sure why if they have the exact same engine
B58 is also one of the best sounding engines in my opinion
N55
*In retrospect, Toyota was wise to chose this engine for the MK5 Supra.*
no lol
@@lordjaashin
Which other engine would be better?
@@CrazyWeeMonkey UZ. Revive the Soarer, the A90 is more of a Soarer than a Supra in any case.
Put in the latest V8, bubble up the roof, elongate the tail, styling is whatever because I don't know any company besides Mazda who still make good looking cars. Job done.
@@Christian---
What you're asking for is the Lexus LC500, which already exists and is essentially the spiritual successor to the Supra.
@@CrazyWeeMonkey Basically, but I hate the fact it's a 2-ton car, I hate the F spirit whatever edgelord styling, it's obviously aiming to compete in the SL's or 8-series' ballpark and that is *just* not the point.
I spent quite some time searching for the right 6 cylinder BMW with a manual transmission. Landed on the 340i xDrive and have no desire to look elsewhere
please make a video about the s54,55,58, also the tuning side of things, show us some builds of respected brands like ac schnitzer or alpina, i fkn love alpina!
So glad they ditched the electric water pump- I nearly froze to death one night when mine failed in the middle of nowhere in sub-zero weather. But those unreliable VANOS solenoids on the back of the engine? Stupid!
This has been a problem since the E8X, maybe earlier. Mine went in my N54 135i out of nowhere. Car shut down the engine immediately while I was driving with a overheat warning ⚠️. I get that it wanted to save the engine but it was dangerous, I had to force my way sideways through traffic to get onto the shoulder, all while coasting with no power and people having to avoid ramming me.
@@J_S591 Yeah- the water pump, plus going into limp mode for no reason a few times, plus the run flats leaving me stranded (I live in NM- you can't find those things outside most places) means I stopped driving my low mileage N54 335i on road trips and took my 250k mile 95 Jeep Cherokee instead. I trusted the Jeep to actually get me where I was going. In all those miles it never left me stranded once
@@blurglide limp mode is a disgrace.
Not to mention the oil filter housing… I’m sure it’ll be a fun job when the gasket on that goes bad
@@JeffDickson87 u mean the gasket that you change every oil filter change?? 🤣🤣🤣
1:38 dead fly in cylinder adds 20 horses
Well flies do like to land on shit...
Not a BMW guy but hearing the exhaust notes with pops and bangs omg. Also seen a video on a X3M being tuned making around 700whp I believe. So the engine has more potential.
Great video - I have a 2020 540i which has an upgraded TU B58 however is the B5C variant with the two port head. In your opinion is this still a strong engine which would be suitable / reliable for some slight modifications such as a stage 1 tune to bump the HP/torque into the 400-420 range? Thanks
Pros:
-Lighter construction thanks to aluminium
-Higher low-end torque
-Gasoline direct injection
- *TIMING CHAIN* screw non-interference BS
Cons:
-Complex Electrical
-Expensive af
Expensive is relative. What alternative is there with this performance potential ? Especially when talking something which isn't a 4 pot engine
Cons:
-bmw
-timing chain (and thus all VANOS crap) on the back
-DI
It's new... Having owned BMWs and knowing the history of bmw's quality over the years... I think it's only smart to really let it see the test of time.
(I love what you get out of box with this motor, but honestly the fact bmw makes it... Would push me in just about any other direction)
3 and more years is more then enough time to judge it.
I have had a G31 since 2017 with b48 and it has been absolutely bulletproof, has 100k miles on it right now. That should be an indication as B58 is B48+ 2 cilinders :)
my dad used to own a 3.0 CSL and beat on it for 20-30 years ish until i was born in 2003 and when he sold it, it ran like it was new. what people see about bmw’s “bad” reliability is americans thinking they can rev the shit out of em and go fast when it hasn’t warmed up yet. i have not seen a single broken down bmw in my life. in reality they’re really really really reliable
@@NakiriX1 that was a diff generation all together. Imo older the better
@@NakiriX1 HAHAHAHAHAHAHAHAHAHAHA half of the German bmw acronyms have to do with bringing them to the shops or breaking, they are NOT reliable
Does anybody know where the secondary air pump is? That throws the codes on this motor ?
Gen 1 is 6 port. gen 2 (Supra /Mx40i) went to 2 port btw 👌🏼great vid
Yeah I got confuse for a sec
1.37 Is that dead fly ? 😁
The vanos are replaceable with engine and transmission in the car nos issues ! They are very short and not very hard to get out. The only thing that is hard to do is REtiming the engine if example changing timing chain and cams sprocket are easy to take out if you have the tool.
Overall, good engine ! Wayyyy better than ant GM v8 or v6 engine
Yeah i will take a ls or lt instead
@@connor3288 Then you must be crazy
@@senioraxys3947 why? Ls is amazing. Is powerful, compact, and pretty efficient. You can easily make 500hp n/a cheaply.
@@connor3288 They have awful reliability, very common to see some 30k miles GM v8 with broken pushrods, toasted bearings, bald camshaft and timing chain loose like a bike chain
@@senioraxys3947 Which ones? Worse things i can say about them are oilpump oring and afm. I dont work on brand new cars under warranty.
Time will tell on reliability of these. In the UK they are much rarer than the 4 cylinder petrol and Diesel BMW engines and they tend to cover less miles. What I will say though is that a few have had broken pistons, injector failures and scored bores. They seem reliable in most cases but may not be as bulletproof as many people think. The official long service intervals, single row timing chain and the fact it is mounted at the back of the engine are not a great combination either and that setup has caused issues in the past. Mine is on 53k and going strong but does have the occasional tick and rattles which come and go.
BMW straight 6s sound so good, it's a shame i don't hear them much at all.
That is a reason why i love inline 6 than v6 😍
Lower torque numbers though.
@@surfside75
Not necessarily, torque curves between a V6 and Inline-6 with identical Bore x Stroke should be about the same, though an inline-6 may be able to make more torque & horsepower because it's smooth balance requires lighter balance shafts and lets it rev higher.
The advantages of V6's relate to their packaging. They are much shorter (length), meaning they don't require hoods as long, and physically lower (height), giving a lower center of gravity and the ability to have a lower hood. But they are wider.
@@surfside75 if it was not for being so compact, brands would have not turn to v layout so much
The B58 is a much more modern engine than the 2JZ ... you really can't compare. Big power Supras are supported by aftermarket engine and driveline parts (and ECUs!) ... the B58 will get there in time.
Yeah but remember Toyota went through the whole engine and components and made sure it passed their standards before placing it in the supra what failed was sent back to bmw and remade
@@jeromep3182 Yes for realiable stock power levels ...
@@jeromep3182 they didn't, that's marketing bs
@@jeromep3182 I've never seen proof of this.
I got a 2021 M340i, it burning engine oil after 6500 miles, anyone know what happened on this or got same?
I own a 2020 supra 3.0 & I can confirm it does burn oil fast. A friend of mine also has the same problem with his supra. Many German performance engine loves to burn oil. Keep a quart or 2 of oil somewhere in the car so when the low engine oil warning comes on just top it off.
Beautiful engine, enjoying the hell out of it an absolute gem!
While that block and head looks pretty beefy, I'm looking forward to all the money I'm going to be making off of these at the 70-90K mile mark when all that Bavarian plastic succumbs to that intense heat and pressure.
Yeah blame the stupid green peace and government to put more restrictions on emission so every car manufacturers has to use plastic in order to save fuel consumption
will probably be even less km than that. I still can't believe you pay 120k for a car and get plastic intakes..... I mean wtf is that
Have to make a aftermarket intake and ditch the plastic intakes
Designed obsolescence.
I would prefer manufacturers used Pyrex Glass rather than plastic.
It's always the plastic bits that age badly.
So how reliable is it? I've been put off BMW in the last 10 years because of their poor reliability records.
Let's just say Toyota had some input in the reliability part. Especially since they used the engine in the A90 Supra.
Ever since they switched to the B engines (B48 2.0T, B58 3.0T) they've shot up significantly in reliability metrics. iirc they began to implement bunch of Toyota manufacturing standards/methods around 2013 and their current cars are much better as a result.
@footballcoreano 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
This video made me miss my BMWs
S58 is going to be crazy once they really begin experimenting with them.
Much heavier motor
So basically the reason its so durable is because its a diesel block?
Ignore the haters but yes the MKV has a B58B30 because it’s reliable and it won’t blow up while racing
You don't wanna die on that hill trust me
I've noticed alot of famous high-power German engines use diesel engine blocks. The VW VR6 was originally meant to be a diesel engine so it has very thick cylinder liners which is why it can handle so much power and boost stock. B58 is the spiritual successor to the 2JZ and VR6 in my opinion
Please do a video on on the Mercedes’ V12 M279!!
One day, i'll get a A90 Supra with the B58(if people dont realize how cool the new Supra is)
People hate on the A90 Supra because it's not a Toyota. But there is enough Toyota in this BMW Z4 coupe to let you know that Toyota had involvement in this joint development. They even made it easy for people to eventually 2JZ swap it.
Yet the current GR 86 and the previous generation didn't get much hate despite being joint developed with Subaru.
@@JoseRivera-ym3wj Because the A90 is closer to a Soarer, being co-deved with a luxury brand. I really do not understand why the 86 got off with as little as it did because inherently a new AE86 is not legal/profitable. The GT86 is nothing but copium.
I like the mk5 more than overrated mk4. What I don't like is automatic gearbox and too much BMW stuff but manual is apperantly comming so all I need to do is wait until they get cheaper
Get an m240i instead
Everything that's BMW is made to last 60 000 km.
Have you owned one?
Will it still have vcg and oil filter housing leaks tho?
If it's a BMW, leaks are guaranteed.
So what your saying is, dynamic balancing issues with stock crank/rotating assembly, at mildly elevated power levels, are extremely rare?
BMW took inline 6s to the max as well as Toyota
I love this engine in my m240i. The rating of "335" horsepower is a complete joke. 380-390 is reality. The later "382" horsepower version makes 430+.
Seen plenty stock m140i/m240i on the dyno before they got tuned and they are around 340-360hp. You are exaggerating with 380-390hp lol. Mine for example with stock ecu but with catless downpipe made 365hp and 540nm
@@zdx197 380-390 at the crank, and that's conservative. Almost all cars sold are advertised with crank HP. You're talking WHP.
@@hartsickdisciple i am not talking whp mate, B58 gen1 like in m140i or m240i does NOT have 380-390HP at crank bonestock lol
@@zdx197 Then how does it trap 110+ mph in the 1/4 mile? The m240i weighs 3400+ lbs, and traps 110-112. That's indicative of a car with at least 320-330 whp. Compare across all American and Japanese makes and models for verification. The German brands all publish approximate WHP as crank HP for their turbocharged models. This has been true for 10+ years.
@@zdx197 I've seen dynos of stock gen 1 b58s making 320-340 whp. I've also seen some making 290-300. This is why I brought 1/4 mile trap speed into the conversation. That's the most reliable indicator of a car's true power to weight ratio. Either someone's dyno is lying, or there's some bad gas in some of these cars, because only in Germany does a 3400+ lb car with 290 whp and 330-340 at the crank run 12's at 110+ mph. That doesn't happen with American, Japanese, or Korean models.
Which is than the best diesel six ? Compared to which diesel six from Mercedes ? I want to put one in my Nissan Patrol MK.
Dude. The technical update is the two channel exhaust outlet cylinderhead. The 6 channel is from the first version.
Thanks for featuring this engine. I will be putting a built one in the aluminum-skinned BMW M1 replica. The suspension will be Lancia 037 clone. There’s a Ford Cobra fabricator in Utah I believe can do the bodywork. Feels like I can get it done for around 250k. Doesn’t really matter. I’ve got a rich 82 year old dad. He won’t last forever.
what the fuck?
Daddy daddy daddy
@@AlienLivesMatter Too bad you don’t know who yours is. Mine is going to leave me a fortune that I can do something unique and interesting with. Jealous much? LOL. Better luck next life.
the B58 got good after toyota fixed it, they used it in the supra and had bmw going back and forth fixing parts till it met toyotas standard.
Ahh, Toyota did NOTHING to this engine.
@@ACommenterOnRUclips yeah they did google it. Toyota used this engine in the supra, they fixed all the failing points
@@ASRCO Toyota did NOT use this engine in the Supra ...
BMW picked that chassis, that engine and that interior and gave it to Toyota with the middle finger.
KNOW YOUR FACTS
@@ACommenterOnRUclips yes they did , they took the motor back to japan and retuned it , the b58 in the a90 is not like any other b58 in bmw
@@jaimatic23 🤦🏽♂️
Happy to be an owner of this amazing engine on my M340i ! Not going to tune it. I stick to the idea that the manufacturer did everything he had to make this engine so durable, so tuning it won’t be a good thing to do imo
Plenty of potential left, if you drive it slow when its colt etc there wont be an issue.
Tuned my 335i N55 at 110.000km and this machine runs smooth as ever 3 years counting, zero issues.
380hp 550nm , pulls it every day no problem.
Tune it! Just a catless downpipe and a BM3 tune will wake this beast up. Mine has a big turbo and 650hp. It is super reliable and I beat on it daily.
Make a video about oversquare compression ignition engines.
Whoever buys it second hand with high mileage and has to replace the timing chain I feel sorry for them…
Most diesel bmws have had that desígname they don’t break at all 90k on mine full e85 for 3 years with 500whp no issues
@@Justanothercarguynyc 500whp lol sure
@@RandomGuy-ej9gr bro you're looking mad dumb right now. 500whp in these is a cakewalk. It is even done with stock turbo in the right drivetrain.
We have a B58 engine in our BMW. It is an OK engine, but it is also the reason why we are leasing this car, despite me having a fully equipped shop. This engine has too many Achilles Heels with potential for VERY costly repairs, all the way to engine replacement. Calling this engine good is a bit short sighted. It is simply the next best step within the world of planned obsolescence junk.
Lol everybody told us is a good reliable engine
Love all Papadopoulos shots. Hes an amazing engine builder
Did anyone else notice the dead fly inside the piston during assembly? 1:36 🤣 That explains the higher compression.
Plastic crap that will break with time because of heat and it will cost a fortune to replace. You got the chain on the firewall side. Direct injection so your valves will be cloged.
@footballcoreano still spouting the BS I see 😂 Do you actually believe the utter drivel you comment?🙄🤡
I've seen some intake manifolds break on the B58. Only @ 40+psi of boost (:
Not your average power levels...
But not the best reliability
What are the most common issues with B58 that you know of, out of curiosity.
At least it has warranty
B58 is very reliable..
Dude. Toyota picked it up for their most legendary icon car, its damn fucking Toyota
That itself justify reliability for me
No the B58 is incredibly reliable, one of the only problems is the timing chain placement (not affecting reliability but is tricky to repair) and carbon build up over long periods of time, but there are many solutions to clean the engine. An example of an unreliable BMW is the N54. The N54 itself is a brilliant engine, but the auxiliary parts such as the high pressure fuel pump let it down. Replacing all these faulty parts will make an N54 very reliable.
Other unreliable BMWs include the N47, early N20s, and the N62/N63. These are naturally unreliable engines.
How could you show the beaver at the end..
There’s a loud ticking sound during cold start and the local agent says it’s the injection - really?
When I rev hard, I can also hear it from the cabin.
Are these normal or something is not right?
It's normal for direct injected vehicles. You are going to drive yourself nuts if you try and repair that
N52 is still best
For me this B58 engine are suck .
I rather recommend M50 with 3.0 stroker build and add a turbo
Explain the reason.
@@derekj.tejeda267on m50 price for engine and parts is cheaper, simplicity of building and maintening it, sound is better , reliability if built properly will last a good ammount of years. There has been a b58 engine swap on a e36 though check it out on youtube
All BMW IS JUNK
This is the reason why I want to swap this unit in gt86 and pair it with gs6 - bz MT( what are expensive as hell and go upward 4.5k comparing to cd009 that are in great shape for 1.5-2k) + to modify the diff ratio .
Any BMW owners , I know my question is stupid but are there any manual gearbox alternatives which 'd fit well with b58 without doing ridiculous handjob as house bell cut ?
Those are some solid engines.
From the point of view of someone that works on engines, the B58 is a pile of shit.
Feel free to share details
@@VisioRacer Papadakis Racing has a full teardown video of the engine. The can wheels are at the back of the engine, which makes the simple task of changing camshafts very complicated requiring engine removal just to get better camshafts. The variable lift system is very complicated to remove.
The intake manifold is PLASTIC. The oil filter housing is PLASTIC. The thermostat housing is PLASTIC and computer controlled for no reason, overcomplicating a proven system with electronic control. Also, if you desire to have a normal thermostat system, the computer in the car will not allow the far to function due to the computer controlled thermostat. The valve cover is PLASTIC. All that plastic around heat and pressure is asking for fatigue and deformation causing leaks and poor sealing, asking for low oil pressure, not something I want for a 80k dollar Supra.
The internal exhaust manifold eliminated the possibility for exhaust porting for better power. The engine does not fit on a basic engine stand that can hold 99% of all engines making it a neusance to work on even outside of the car.
Spark plug holes are very very small, making replacement another neusance. The connecting rod caps are cracked for a more exact fit on the crank, which in my opinion is less accurate than a simple ground or machined finish on the rod caps.
The cylinder head has a very high part count in order to achieve the variable valve lift, much more complicated system than the 2JZ as well with a direct cam on shimmed bucket system instead of the finger follower system. When Papadakis rebuilt the B58 for high power, the intake manifold was changed to aluminum for better strength, so the argument of plastic used as stock for better weight holds no value.
Let me know if you have any questions.
@@joshlewis5065 Yeah, most of the info is mentioned in the video and I agree. That’s why BMW engines are kinda known as fragile. There is always something that pops up and requires an expensive replacement.
@@VisioRacer I personally have 2 2jz engines, have have had both of them apart all the way down to the long block. There is nothing to them, especially the non vvti engines. I just wish they had 4 bolt main bearing caps instead of just two. And it would be asking a lot but gear driven cams would be nice as well as finger follower cams for the most reliable high rpm operation
🤣🤣 Pray to the Vanos gods!
Thanks for showing the B58 is NOTHING like the 2j and can't be compered to the 2j
We are both on the same page. The B58 surpassed the 2JZ. I do not know why people compare them.
The s58 is even impressive
@@negropen 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
1:37 somone has fly in the engine. :D
B58 crew reporting