Diamond Blade Secrets You Should Know
HTML-код
- Опубликовано: 13 ноя 2021
- Sponsored by CorePlus Specialist Diamond Cutting Blades.
▶ Discover more with CorePlus: core-plus.co.uk
About CorePlus
As specialists in diamond cutting, CorePlus offers a comprehensive range of Diamond Cutting Blades, Dry Diamond Core Drill Bits, Diamond Tile Drill Bits and Diamond Hole Saws.
The product ranges utilise the very latest design innovations and technological advancements in diamond cutting.
The easiest to understand range of diamond blades available with uncomplicated naming and simplified packaging make it simple to match the correct blade for the material being cut.
When long blade life is the key selection criteria the Elite Endurance range provides the maximum number of cuts for your spend.
==========================================
#CorePlus #DiamondCutting #DiamondBlades
🌲 Skill Builder Link Tree: linktr.ee/skillbuilder
👍 Tell us what you like: skill-builder.uk/vote
📪 Ask Skill Builder: skill-builder.uk/send
📣 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: ruclips.net/user/skillbuilderc...
💧 We Support Charity Water: www.charitywater.org
◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.
Roger is a Diamond Geezer 💎 😉
With no BS. Straight to the point. diamond! A proper gem of a man
If you listen to him you won't go far wrong , he is doing what he loves .... Helping people with good true information, you can hear it in him , I'm nearly 50 years in the trades ..... I think he is a great ambassador for the game. ......... Make him prime minister I say ! ........ At least he will tell you the truth. ......... Nope! Its not damp ...... Your roof has blown off ! 👍😉
Wow, what a talker, yet unlike most RUclipsrs who like to hear the sound of their own voice, you sir are full of information with out the fluff, I learnt so much. thankyou.
Roger B is straight up fun to listen to. Not everyone can keep your interest, and had a laugh about "flooding" a customer's kitchen. In just a few mins you get a lot of knowledge.
This is where paid videos really score. When you have the manufacturer speaking through someone like Rodger, someone who can add his own knowledge to the manufacturer’s, we can all learn considerably more.
Would be interested to see a variety show where you test various cutting discs on different materials, like you did with the adhesives. 👍👍
Keep em coming Rog, I enjoy your little videos.
I thank you Roger for sharing your knowledge and experience with us. I've been on many a job sites where the majority of workers do not know how to properly use tools or the attachments, and their macho manly-nism won't allow them to take advice from someone else. They'll just cut whatever, however, I've recently seen someone cut granite countertop with a super aggressive concrete blade just to get the job done fast as possible not realizing it's costing them money and reputation. Seen a guy clearing old brick mortar with a continuous rim like it's a tuck point.🤯🤯Nobody ever taught them the proper tips and techniques associated with. So I thank you for being a great trades teacher and sharing the correct knowledge with us all for years and generations to come, cheers mate! 🥂
I had a lot of old pipes and rebar to cut up and from what I read ruclips.net/user/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
All correct. Finally someone explained it correctly. Woohoo. More stabila rbeam please.
Thanks Roger (and Dylan) great job, look forward to more videos with you.
I bought a diamond stone cutting blade for my circular saw...Used it to cut channels through some concret pavers in order to first leave the pavers undisturbed in order to dig trenches for concrete footings for a small conservatory I was building (for my dogs)...It worked very well... With a wooden guide I constructed for my circular saw.
Thanks for help 😁
Really informative and perfect timing as my Stihl cut off needs a blade... It's like you're in my head!! 🤯👍😁
Thank you very much for your thorough teaching of cutting with the engineered blade that is more resistant to the heat and repels the heat as well . Water is lubricating between the surface of Cutting blade and the concrete or bricks that are being cut , it increases the life of the blades a lot and reduce the temperature.
nice video great advice keep em coming.................how about a test on the best hss drill bits
Lovely explanation
Thanks Roger. good to see sponsorship handled well, allowed me to enjoy the learning experience
That is nice of you to say so.
@@SkillBuilder I critised about it on a previous video so only fair to say when its done well.
Very informative. Thank you.
I heard you discussing heat pumps on radio 2 today Rodger i thought you maintained your composure beautifully and got your points across well, also the listeners that called in only strengthened your case.
PS thanks for your videos i rendered a large extension today first time rendering after watching a few of your vids, went well happy with the job..
PSS. Jeremy Vine called you a plumber...Mind you ive called him worse than that🤣🤣
Thanks. Good information
Great vid as always 👍
Can I ask you some advice.
My boiler would make a loud whining noise when kitchen taps were turned off after using, the noise would always stop after about a minute.
After turning off upstairs taps the other day the boiler made the whining noise again, this time louder and it would not stop until I turned the power off to the boiler, when I turned back on there has been no more noise since.
An engineer who refused to inspect the boiler said the noise coming from the boiler is being caused by a faulty tap washer.
Can a faulty tap washer cause noise to come out of the actual boiler?
Thank you : )
Roger the original rough diamond 😉👍
Top Advice, 🖖
So the diamonds themselves don't technically wear out. It's the glue that binds the diamonds that is crucial for what you are cutting. If you cut something very hard like granite, you'll find the diamonds actually disconnect from the glue and are lost. This is where you need a softer glue so it wears down and exposes new diamond. Cutting softer materials needs a harder glue so that it holds onto the diamonds for longer and doesn't wear out prematurely.
Great information log and Really interesting. As a sparkie I don’t use the larger diamond disk hardly but only disk for my 125mm angle grinder with a basic looking diamond disk . I didn’t know about all these different types. I use diamond core drills for cutting ventilation or cable runs through walls and have found I end up throwing them before there is no tip left because the side edge have worn too close to the barrel of the cutter coursing excessive jamming. Guess that’s normal.
Yes they do wear in that way but, again it is dust that wears them. If you keep pulling them out every few seconds to clear the dust it will help. If you think of it like sex it is more in out than push.
@@SkillBuilder I have to say I’d never thought of it that way 😆
Would you be able to comment on none turbo or create a test like you done for adhesives? My suggestion would be to use 180dim blade for compare
Go Roger .. .. on radio 2 telling them how it is with heat pumps 💪 get em told roge!!!
Are those blades Ok for cutting reinforced concrete? Or they'll be damaged by the rebar?
Lemme see if I’m getting this right: essentially you want your blade to be a self sharpening blade. Instead of having dull diamonds constantly until they’re gone you want fresh diamonds to replace the old ones over time so it’s still just as effective at cutting a year later (this is just a random video I clicked on idk anything ab diamond cutting or when to replace the blades) as it was when you first put it on.
I wanted to leave a comment and say that I absolutely loved this video. You did an excellent job but I'd prefer it was more long and detailed. It's not that I'm complaining, I loved it but did not want to see it end. Good Work! Thank you. Also, its obvious that you're very passionate about this. It certainly shows.
Can you put 2 blades 2mm into a cutter to get a wider cut?
Hi Roger - sorry to digress but just PVA,d my floors to stop them creaking about 2 hours ago. They were bad - really bad, went over the the cracks 3 times to make sure the solution got well in to the joints. Fingers crossed because i am at my wits end with creaking. Will let you know what happens.
Thanks, I really hope it helps
Good information but for cutting gemstones which better and safe if touching your fingers
I don’t understand how the diamonds are stuck to the blade and aren’t knocked off when cutting..
Go on Roger,heard you on Jeremy Vine,GERTCHA!!!!!
I find the hardest thing is educating the tradesman that he needs to have multiple blades depending on the material. "But that will be £££" Yes but you'll have the right tool for the job. A porcelain blade isn't actually that great for ceremics for instance. It will work but a dedicated blade is the way to go. Also, I say tradesman as I find female traders are more open to listening to the advice and taking it on board.
I wish i had watched this before i had to cut a hole in my concrete basement floor a few years ago. I cut an opening and dug down almost 100 feet under my house and put in a spiral stair case. I wallblocked it like a well and sealed the outside so no water can get in. I didn't plan on going that deep but i wanted to hit bedrock.
I thought I recognised the voice. You ran rings around the dude on BBC2 🤣
What's the best bits for drilling tiles?
We have a range of diamond tile drill bits especcially for really hard porcelain tiles.
Choose the hardest bits you can find, generally the most expensive. The drill WITHOUT hammer setting and little pressure to get through the glazed surface
Just heard you on radio 2! Had to deal with a proper salesman😂 handled him well mate
Really ? Not from what I heard
Are you going to test Them?
yes
@@SkillBuilder That will make a great video if you do a side by side comparison with a known brand.
Pretty much not the diamond blade I wanted
(I’m talking about the GD level. I still like the video!)
They are real diamonds. Just synthetic 😊
Yes real synthetic. Just don't try selling them in Hatton Garden
Who owns CorePlus and where are their discs made?
Forgefast and probably China
Thank You Roger. I love the internet for the fact this exists and I give a fuck. Life is great. Enjoy life.
👍
Granny what eyes you have... All the better for seeing you
Where is James?
Buy cheap, get cheap.
Well, i noticed never go cheap on these blades you will lose more money.
Make the diamond last longer keep it on a females finger👍😉
They are inclined to run off with them
This is not an advert 😂
The information is generic
@@SkillBuilder I agree with the knowledge of blades. However every blade in it's packaging? It's clearly showing only one brand and no others. This is what people call an advert.
I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the ungodly wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the ungodly or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." 2 Esdras 2:31
;'''''