Haha not really, it's just a matter of time for the carbon to completely block the holes to lubricate bottom-end bearings, causing bearing failure. Lubrication & heat is the weakness of 2 strokes, so they are quite sensitive to the quantity&quality of oil used and amount of fuel coming in & burning. But in my case, you are right, I have no idea how my engine still ran while looking like this haha
@@BrattyBiker Once rebuild done start using Motul 800T racing spec 2T oil, 20ml for 1litre petrol is enough, should be premixed well with the petrol, cost is around 2000/litre, so 40rupees for per litre petrol
Crank case splitter is not only for crank case splitting it is also used to push the crank from crank case . While starting an engine dismantle .remove the parts like clutch , magnet etc from engine onwards it make more easy .
Knocking is usually caused by bad fuel, so first drain & clean the tank, use fresh good quality fuel. Clean your engine head & exhaust too, clean your carburettor, change spark plug. This should help.
Bro, a random question - I had been riding my rx135 without a battery for a long time and had it changed recently. Now, the horn and the indicators work only when the handlebar is completely turned to the right. Could you please tell me what the issue might be? I did play around with the wiring a bit(without a proper understanding) and might have messed up the connections.
Online stores, yes. Check out VMAX. But usually sellers maintain instagram profiles for advertising & selling the parts. As for your height, an RX100 will feel cramped and small. I am 5"6 so the bike feels fine for me.
Bro en bike rx135 yesterday varaikum nallatha irunthuchi ana innaiku bike start acculturation koduthune iruntha on la iruku acculturation vitta running la off aaiduthu slow speed screw evelo tight pannalum Bike race aagala bro enna problem
Clean your carburettor. Pilot and idle circuit could be blocked by dirt from petrol. If you find dirt in the carb, then clean your tank and use good fuel.
Great work, keep rocking
Thanks sir :D
i have a rxg and wanted to restore it by my self and im learing from your channel hope to see the next video asap. and hope you can help me with it
Ofcourse! But I am not an expert, if you need help, I'd suggest you to do it along with a mechanic who can guide you as you do it :)
great, waiting to watch
Thanks :D
It has been a month since you disassembled. Any updates?
Yes! The engine rebuild is coming along well! Painter has just begun work too. More updates shall follow soon!
@@BrattyBiker all the best
Thanks :D
Regardless of the engine’s condition a 2stroke will run🙌
Haha not really, it's just a matter of time for the carbon to completely block the holes to lubricate bottom-end bearings, causing bearing failure. Lubrication & heat is the weakness of 2 strokes, so they are quite sensitive to the quantity&quality of oil used and amount of fuel coming in & burning. But in my case, you are right, I have no idea how my engine still ran while looking like this haha
@@BrattyBiker my bike's crankcase has never been split i wonder what that looks like ☠️
Haha, best to keep the rings in good shape!
@@BrattyBiker Once rebuild done start using Motul 800T racing spec 2T oil, 20ml for 1litre petrol is enough, should be premixed well with the petrol, cost is around 2000/litre, so 40rupees for per litre petrol
Thanks, yes, I have Motul 800. It costs ₹950 per litre.
Crank case splitter is not only for crank case splitting it is also used to push the crank from crank case . While starting an engine dismantle .remove the parts like clutch , magnet etc from engine onwards it make more easy .
Thanks for the information sir!
Great work bro my rxg knocks too much kindly help me to resolve
Knocking is usually caused by bad fuel, so first drain & clean the tank, use fresh good quality fuel.
Clean your engine head & exhaust too, clean your carburettor, change spark plug. This should help.
@@BrattyBiker all steps done I also changed clutch bell n primary drive to rx 135 knocking reduced after changing clutch bell n p drive now what
@@RahulGupta-ql8jy Honestly have no idea why. Take the head & block off, inspect piston rings, inspect conrod bearings and see for play.
@@BrattyBiker i think he talks about jerk issue
Put 2 head gaskets bro... Knocking issue will resolve
Bro how much cost of change crank and all beerings ,oil seal, gasket
In rx135
I don't remember exactly. Please ask spare sellers.
On some rx bikes I saw escorts badging on fuel tank.. means they are entirely mfg in 🇮🇳itself???
Yes, RX were manufactured at Escorts plant in India.
Bro, a random question - I had been riding my rx135 without a battery for a long time and had it changed recently. Now, the horn and the indicators work only when the handlebar is completely turned to the right. Could you please tell me what the issue might be? I did play around with the wiring a bit(without a proper understanding) and might have messed up the connections.
Looks like a grounding issue. Get to a bike electrician & check the wiring.
@@BrattyBiker Oh OK, Bro. Thanks!
Is there any online platform that sells used 2 strokes..? Iam a 6 ft guy.. Can tall people ride rx 100 comfortably?
Online stores, yes. Check out VMAX. But usually sellers maintain instagram profiles for advertising & selling the parts.
As for your height, an RX100 will feel cramped and small. I am 5"6 so the bike feels fine for me.
@@BrattyBiker bro.. Max 100r / samurai.. Can be some what suitable for tall guys???
Yes.
Bro ware did you get RXG monogram
Available online with a lot of sellers.
@@BrattyBiker pls can u send the link or contact
+917669677779 - Rishabh, whatsapp him, I think he has them.
@@BrattyBiker tq
Cheers :D
Bro my Bike rx135 Cylinder E4 But Head E1 edhachi problem varuma
No problems.
How to change
rxg jerking issue??
Replace your magnet with that of the RX135. Issue will get resolved.
@@BrattyBiker thnx bro
Bro en bike rx135 yesterday varaikum nallatha irunthuchi ana innaiku bike start acculturation koduthune iruntha on la iruku acculturation vitta running la off aaiduthu slow speed screw evelo tight pannalum Bike race aagala bro enna problem
Clean your carburettor. Pilot and idle circuit could be blocked by dirt from petrol.
If you find dirt in the carb, then clean your tank and use good fuel.
Nethu varaikum nalla irunthuchi bro saturn ah ippatha antha mathiri aaiduchi bro ideal screw evelo increase pannalum bike race aagala bro
@@dineshm5287 Again, clean your carburettor, especially pilot jet and atomizer. If it gets clogged, then bike won't idle.
My bike Yamaha RXG 135
The bike is the girlfriend 😉☠️
🤪😅😂