Paper Clay Masking: White Rabbit
HTML-код
- Опубликовано: 6 сен 2024
- Making a mask with paper clay. A start to finish time lapse. Total time worked, 8 hrs. A lot of sanding not pictured. I left the piece about 3 days to dry before removing it from the base.
Paper Clay Recipe here:
dahlhartlane.bl...
Music by DJ Spooky: Of Water and Ice
From the Free Music Archive
Watching this in 2018: Hmm, what a creative usage of toilet paper.
2020: tHE TOILET PAPER.
I know! It's horrible!
'mum , look at this can I have 2 rolls of tiss.....'
" N O "
My mom said that. So I bought my own xD
Great work. Your thoughts and commentary would have been thousands of times more welcome than the music however.
You're right. I would have liked to do so. But at the time I was unable and had no equipment or programming to do so. But! Now I do and the planning is in the works for another video! Also, what kind of videos do you make? If you have a preferred method for doing overlay yourself I'd be glad to hear any tips you have!
Great; I really look forward to seeing your future videos on my subscribed feed. I prefer to not overlay whenever possible. Check out some misc audio filters/focus peripherals (especially shotgun mic hoods) and if there is half decent background ambiance, you'll be surprised how much post production = unnecessary. Funny enough, I crafted some for a few handheld cheap-o camcorders which worked better than recent purchases! No doubt you'd come up with something superior still. Things as simple as propped up particle board donning a few draped comforters flanking close behind the camera, and tons of the background noise cancels out.
After drudging through Audio design in university, my take away was the same as visual arts. Tech in production needs a specialist, or to be the center of production. Like any other "medium&substrate" I suppose.
Honestly, some productions utilize sfx, music, & visual flare to effectuate a supplementary stimulant; montage soundtracks for example. However, the best content, in my little opinion, comes from those who open monologue within the breadth of some project and give glimpse into the taste of lonely "craft crazed" ramblings. Feels cathartic to hear someone's hr 3 knitting ramble and know you aren't the only one who thinks silly things far before the arthritis kicks in.
anyhoo. I am sure you have format reasons for preferring the post production method.
Truth: If pressed to edit audio, I'd be a shill and go adobe aftereffects if anything is on the table.
Most knock offs are similar interface-wise. drop & crop on time bars. Scrub and dub til it's beautimus. All happy! Trick: spend a day with junk audio, video mixes and PLAY with whatever you settle on. Deadlines and masterpieces are NOT where the joy of discovery lend insight through tribulations. Whatever can be done, you can too! Your videos will be wonderful.
This is why we ran out of toilet paper
totally not wrong. Had intended to make another mask making video, but corona got me!
😂😂😂
Wonderful work! You're sculpting is a sight to behold, I like the shape of the rabbit face, good design choices.
...Follow the white Rabbit...
Necrofessor Thank you! I'll be posting more of the costume build In the hopeful future.
Thanks Love!
What..?
the music is terrifying
lol no
Tell me about it
Aggre
ye
It is?
This is awsome! I’m an art student, and looking to do lots of masks as a final piece, and this is super useful and saves me spending a lot of time and Monday on the clay. Thank you!~
Very welcome! Glad it could help! I'm currently cutting together a short vid on just the clay
Ideal!~ I think my biggest obstacle is going to be making the base shell for the mask. I’ve looked through your comment and saw the thingy you shared with the cardboard so I’ll have to give that a go definitely!
@@SilverXIIVI fantastic! The paper clay is super versatile. If a bit messy. If cardboard doesn't work for you try tin foil as a base!
InktheRabbit I was considering that, I just didn’t know if it would’ve held as a base strongly that’s all. I suppose if use a few layers eh? Thank you so much!! You’re a hero 💘
@@SilverXIIVI awe thank you! I do recommend however if you go the foil route, hot glue the pieces together. There will be less slippage, and your form will hold. A skin layer of masking tape helps too!
This would have been so much more helpful if you showed how you made the actual bunny base cause that's the most difficult part; its easy to build and mold clay if most of the structure is done already :/
The link helped a little, but the base of that mask was most linear (they added the curves later with clay), and a bunny's face has more curves. The base sadly is the most difficult part.
It's true. Which is why I showed the general process in the rat base. These things started as one offs and then I've been trying to answer questions to the best of my abilities as I can. Hopefully the other video helps!
@@inktherabbit1414 both videos you have posted have been super helpful. Thank you for sharing your skills with these videos.
Ahh yiss something to do this Sunday :D
I honestly love this mask so much, but I do have to ask: What are the ears made out of and what did you spray then with?
Hi @rat_lookin_sloth! These are made from leather! I sprayed them with water, which lets the leather become moldable. Then once they dry they get hard again :D
Hey, could you please share how you made the tape base to protrude outward from your glass head?
Cancer it looks like it’s probably just cardboard. Just a guess but I don’t see why it wouldn’t work as long as it holds it’s shape and is sturdy enough to withstand the weight of the clay whilst drying. Paper clay is easy to make and inexpensive enough to experiment with so why not give it a go for yourself?
hi! Thanks for showing interest in the making process! as this was my first rodeo with the paperclay and mask making, I found and used a tutorial!
www.deviantart.com/lizard-of-odd/art/Undead-Demon-Costume-Early-42305973
This is the phenomenal artists deviantart where she walks through the steps on how to build the base. hope this helps!
Wow! I wish i could do this!
What did you use for the ears? I was thinking using foam for elf ears.
Hi! I used a 3oz tooling leather to sculpt the ears, but i bet your idea would work well too. Even something like worbla. Happy crafting!
InktheRabbit Hi! i am trying to make a mask with dramatic and realistic bunny ears like yours, where did you get your tooling leather? could i order it off amazon?
@@esleazzy
Bourbon Brown Tooling Leather Square 2.0mm Thick Finished Full Grain Cow Hide Leather Crafts Tooling Sewing Hobby Workshop Crafting Leather
$8.99
Amazon.com
(Yeah it's there)
I used earbuds, couldn't stand the fucking moronic music
finna be my apocalypse mask
Love the look of teh White Rabbit mask. Very cool.
list items used... that would of helped lots
Om i love it!! Beautifull work!!
A description and measurements would have been better than the music. I really can't sit through 20 min of the sped up video without a description of supplies used.
I'm gonna make this
Excellent! Do it!
I love your black cat!!!X3
It’s so cute!!:3 and obviously, your mask is amazing!!!:D
thank you so much! My kitty, Sinatra, says thank too!
InktheRabbit aww :3
I want to hug Sinatra (^｡^)
@@inktherabbit1414 as in frank Sinatra?:0
Makes me cringe to think about what that wet toilet paper feel like
Not too bad really. Sort of soft and very easily shredded
@@inktherabbit1414 where to get the clay in the UK?
@@billyjoe1789 you can make it! It's toilet paper, joint compound, flour, white glue, and water!
I know I'm late, but... How did you make the base for the head shape? I simply loved this mask, and would like to try to reproduce
Card board and a cheap Halloween plastic mask! The under base was literally just pieces of the cardboard in shapes stuffed with newspaper. All taped to the glass head form.
do you by chance have a tutorial on how to make the base shape you used for the rabbi head?
If someone was going to wear this mask to a costume party, what are your suggestions for attaching the string to keep it on? Thank you!!
My suggestion would be to drill two holes on either side. And thread a heavy duty cord thorough them. And to balance this out, drill a hole in the top center. And tie all these together in the back so the weight is evenly distributed
@@inktherabbit1414 Thanks!!!
Looks AWESOME! 💖I want to make this myself now!
I bet this is the tutorial vanny ( fnaf vr ) used to make her mask, this is really good and your way more productive ;v;
omg its so funny you say that, i’m watching this video right now cause I plan on cosplaying her and im using this video to for reference for her mask :)) !!
@@cowboy9552 :0 im cosplaying too :>>>
I N S A N E - F A M I L Y thats cool! my friend is going to do a gender bent willam afton n im super happy, i’ve never cosplayed before so i hope i do alright :)) good luck 2 u on urs !!
That mask is a little bit scary
Yup! Creepy and fun are my specialty
{}_{}
(0.0) heart for you
(>❤️
You don't have too use flour,and it works as well.🙂
Okay so I really want to make this myself for a couple of Halloween parties next month because this is really cool so I have a few questions:
1) How much did all of the materials cost overall?
2) How much previous experience with sculpting did you have before starting this project and do you think it would be doable for a complete beginner?
3) What grades of paper did you use for the sanding of the mask?
4) What was the substance you sprayed on the tooling leather to make it hold its shape?
5) Did you use a reference image to make sure the features of the rabbit face were all proportional or did you go by eye?
Any guidance you've got would be greatly appreciated, but if you don't have the time or can't answer, take my comment as an expression of appreciation. This is really neat. Well done
Edit: I also realise this was posted a year ago so I completely understand if there's a lot you don't remember
Hi Downloads! I have all the answers to your questions!
1. Less than $20 most expensive thing here is the time.
2. I'd say I'm a intermediate sculptor. I'm not a professional, or at the level to sculpt atomically correct. So I think, so long as you have good references a beginner could totally do this!
4. Water! Tooling leather goes soft when water is added! And hardens as it dries!
5. I did use a reference of a jackrabbit head during the sculpting. But I strayed alot off of it going for a look I liked alot.
Thank you so much for your questions and the Interest!
I missed question 3.
I used a 150grit and a 220 grit!
@@inktherabbit1414 Amazing! Thank you so much for taking the time to respond
@@downloadsdownloads5525 you are so welcome!
Very beautiful! Talented! Never stop creating 😩😍
Thank you so much!
RIP anyone else wearing headphones. Nice mask design too.
Is that a vace or a glass dummy face that your base armature is on?
It's a glass dummy head!
Do you have the pattern for how you made this? I really struggled making pattern and have tried for this a few times and failed. I really like the mask style you did for this and want to use it for a costume look I'm creating. I liked the pattern video for the rat mask but can't seem to get it right
I saw the drill holes where the ears must be attached, but how did you attach the leather ears?
I threaded some wire through the holes and twisted it inside. Sort of a crude attachment but it worked :)
Can i make toilet clay without using joint compound?
Show us how to make your base pleaseeeeeeeeeee, loved the video. 💖💖💖💖 more videos
Hi Jennipher! Since this was my first go around at this process I didn't get any footage of the base before I clayed it up. In the process the cardboard wilted a bit and was removed so i lost the original.
but! if the process interests you, this is the process and tutorial I used to get to the point i could sculpt over it.
www.deviantart.com/lizard-of-odd/art/Undead-Demon-Costume-Early-42305973
Thanks for the comment!
I have this tradition of using old paper, maybe from school, old notebooks and the such to make my masks, but as my profile pic shows, all of them have been of Plague Doctors, maybe i can chake things up and add a Bunny to the collection
Beautiful😍
What did you use as a base for the paper clay? It looks like baking paper, but I'm guessing that's wrong. (Also amazing work, that mask is so amazing)
It's actually a thin cardboard I scavenged from a recycler/compactor. Sort of like what soda can boxes are made of.
@@inktherabbit1414 Ah, thank you very much
Beautiful mask!!! What is the material of the ears? Is this just whater in the blue jar?
3oz leather and yes! Water
hello,
did the mask come off easily from papertape covered base? or did you rather remove the base from the mask :D
the mask came out pretty easily. A little tugging and the paper clay shell separated right from it. i did have to pull the nose pretty hard to get it to release. i think my seams were a little open, so the clay really got stuck. but i hope this next mask wont stick as badly!
@@inktherabbit1414 I see, thank you :)
How did you make the head shape?
I'm sorry, I have a lot of questions. Is toilet paper the best to use, or is normal printer paper or news paper a good substitute? Would I be able to use very watered down paints on similar masks without issue? What was the all purpose stuff that you used, and is it nessessary to make the paper clay? If so, where can I get it? Since I want to do a skull mask for a costume, how would I go about the little details, like tiny scratches? Use a little knife, or would they just be there already from the sanding? Also, how durable is it?
Hi PIzza~ All questions are good questions!
i used toilet paper, as that's what the recipie i found called for. its shreddable and water absorbency is what you're after. if you're gonna substitute I'd think newsprint might work well if it's shredded and soaked in a tub or bucket in water overnight.
Yes! the watered down paint should be fine. I used a basic acrylic straight out of the tub. but once the clay is dry its perfectly safe for painting
the all purpose stuff is joint compound. Basically wall Spackle! I got this at my local Walmart, its in the paint section with wall repair stuff, and in my honest opinion its necessary for binding the paper into a heavier clay. I'd recommend using it. I also used a thin layer of the stuff to smooth the surface of the mask because I wanted a super smooth finish. it sands nicely, and takes detail well.
For little details I recommend sanding them into the piece. If you use the joint compound you can carve into it on the surface and it'll show up well. if you carve into the clay once it's dry, it should have no issues showing up. But be aware, without sanding the paperclay can be rough.
and EXTREMELY durable. I have dropped, banged, and generally abused this mask. it really really holds up.
thanks for you questions and i hope this helps!
@@inktherabbit1414 This really does help a lot, thank you.
Amazing!!
Stupendo, ingredienti?
gorgeous! could you tell me the ingredients? quantity?
I think they just wing it all I know is paper mache (don’t know how to spell it sorry) you can use newspaper or toilet paper for that and leather for the ears
Could I commission you to make me an exact replica of that mask? I'd pay good money for it and it's the perfect type of creepy
I'm always up for a commission! And I've been looking for a reason to try a new molding process for paperclay!
@@inktherabbit1414 How much would you charge? You can email me at ellamentry80@gmail.com
@@ellamentry80 sending you an email today!
The most important part for me is not showed🙈 what is the base made of and how do you make it?
this is cool! How did you make the base?
Oh, and can you made tutorial or... short video, wheare you craft rabbit had form. A.. 4:46
what product name do you use after glue?
😭😭 By looking at my pfp, you will understand how I WANT one! You are so creative! Wth! It is one of the best rabbit masks I've seen out there!
Edit: when you go out with it in the rain, will the water destroy the mask?
I like it
Badass
So cool
if you want to use it on your head how do you hold it? I guess it must be a little heavy to just put on garters.
i used white shoe laces to tie mine to my head, the ears are the heaviest part. lol
Also, do you gesso prior to painting?
I love this! :) ♥
What u make to do this all?
Hi Kimberly! I made the mask just to see if I could. Clay and all! It was really fun!
Does this thing smell ?? And can we see forward with this thing ?? I mean can we see things happening in front of us ??? As I was gonna make this
No smell at all. And yes!
@@inktherabbit1414 thanks
How did you make the armature for the mask base?
Do you sandpaper this prior to painting?
Que se usan para hacer la mascara?????
Si!
Hi, I don't know if you still have the channel, but I wanted to know what paper you used to make the ears of the mask. I would be very happy if you could answer my question!
It's actually leather not paper! It's a 2-3 mm tooling cow hide from Tandy leather!
@@inktherabbit1414 I understand, I don't know if I will easily find this leather here in Brazil, thanks!!
aw man, are there any effective alternatives for the joint compound in the clay ?? I'm yet to try paper clay at all and idk what to use :')
Joint compound can be made at home to my knowledge. using flour, salt and water. Mix thoroughly until it forms a paste. The exact measures can be found online
So no need to buy if you don't want to!
@@inktherabbit1414 thank you very much !!!!!
i am full of grate
where can I buy this mask ?
Bests musics
Do you have a pattern for the mask you had taped on
What are the ears made of
A 3oz leather
Good video,s.....
I want to make this but I'm struggling with the pattern. I watched the other video but each time I tried it it came out too flat XD
Quick Question! Could I use tissues, napkins, or newspaper for this??
I don't see why tissues or napkins wouldn't work. If you soaked the newspaper and shred it it also should work!
InktheRabbit Alright, Thanks!!
What kind of leather did you use for your ears?
I used a 3/4 oz veg tan tooling leather!
what tape did you use to cover the cardboard base?
Regular old masking tape!
What was that thing you used to put the paper clay? Can i use a balloon?
My base was a cardboard and plastic structure. I basically used trash to make a shape. And yes! You can definitely use a balloon!
How long does paper clay take to dry?
This took 3 days to completely dry
what is this .... all the paper clay videos i open have horrorfilm music..... guys be happy. this is a fun hobby.
Maybe because Halloween? I dunno seemed fitting! But I had a great time doing it
Mute is a wonderful thing with this video - what's with the "music"?
Just a first try at putting music on anything Inna video. I've learned alot since then :)
Hi is it possible for you to sell one of your Masks ? I would like to have a personalized Rabbit Mask :)
What did you make your ears from?
A 2oz leather soaked in water!
A 2oz leather, shaped with water! Thanks for the question!
The music scared the shit outta me
Shiva
video: relaxing
audio: earrape
How do you made the base?
I used a dollar store mask and cardboard!
@@inktherabbit1414 tnks
Not enough bass
Materials?
Paper clay made from toilet paper. White glue. Joint compound. Water. Flour. The ears were leather!
Here in my household we don't use toilet paper much, we use a thing called a "bidet"
So I'm definitely doing this
(bidet Japan styled toilet XD)
Oh very cool! Do it!
Abbassa la musica!! Troppo alta!
I want to make a plague doctor mask in this technique, but I can't. TOILET PAPER SHORTAGE AT THE STORES.
I feel that. I really do. I've wanted to sculpt another mask recently. But toilet paper...
@@inktherabbit1414 I tried doing a similar thing, using regular paper, and it works pretty well.
@@chaosinsurgency1213 that's awesome! I just picked up some old newspapers to shred and try the same! Hopefully the results will be good
@@inktherabbit1414 Wish you luck!
Huh, so that's why the spoons tasted like paper.
Exactly
Great art , choice of music very poor,
Very long video
👍👍👍👍👍😎😎😎😎🐰🐰🐰🐰🐇🐇🐇🐇
Jesus christ my fucking ears!
im sorry but this is the worst audio ive ever heard and i had to mute the video. mask looks great.
for like the first few minutes
Sorry to hear that. But glad you liked the mask.
Please pick more jarring music that wasn't unpleasant enough
Worst sound on youtube video of all time
I know. It's pretty awful. But it was an attempt and I learned alot from it. The next video will have a voice over Instead.
How did you make the base mask? Please
I just made a video, on how I patterned and assembled a base mask!