Sunova Repair Guide | Delamination Repair - backyard version at Drivethru SriLanka
HTML-код
- Опубликовано: 28 сен 2024
- Welcome to the complete Sunova repair guide!
This video shows you how to fix a delamination at home or on a trip, if you don't have access to all professional shaper equipment.
We shot this video in the exquisite Drivethru Surf Camp Sri Lanka. Drivethru offers a great selection of Sunova boards as part of their packages. Have a look at their offerings:
www.drivethru....
Don't hit that subscribe button nor also follow us on instagram or your life will never be the same again: / sunova_surfboards
sunovasurfboar...
Great job making it easy. To make it easier, I don't think you need the glass if you only have 2 small holes. You've got all that hard resin under the holes. I'd just sand the resin down to just above the rest of the deck. Someone let me know if I'm wrong, but I've done a lot of surfboard repair including glassing fin boxes back in and putting 1 ft of broken nose back on.
Such a good video bruh best repair vid I’ve ever seen 👌
That’s awesome, thanks Bert great video, I love my Sunova log!
Very Rad , thanks for posting
Hi, such a good video. Thanks a lot. I've got exactly the same problem on my eps board under the tail pad. Thinking I'll leave the tail pad on and just cover it in glad wrap and tape. then drill and fill around it. Would you do the same? Thanks heaps
Great video Bert. Thanks
anytime. much more to come!!! totally will be 21 videos. over 2 days of constant repair footage!!!!
Greetings, saw your last video with the vacuum method. Can you breakdown the tools needed for that?
Could you use this method on a regular glass over foam board?
Hi, great video.🤙🏾
Do I need to use laminating resin or sanding resin for this technique?
I only have these two types of Suncure resins...I don’t have epoxy resin.
Epoxy will work with polyester resin.. but never use polyester resin on an epoxy board. If you have a polyester board, use laminating resin.
Tried the exact same method 20 years ago just didnt last long
so much like me cooking .. funny
This is life saver for me mate.
What’s the resin mix?
It’s epoxy resin. Every type has a different mix ratio.
can recommmend the brand for spray can please
I'm watching the Jamie Oliver of surfboard repair! Jokes aside, this info could rescue a holiday. Nice job!
Thank you ;) More is coming
Right on!! I was just about to take my board to the shop to get my delam professionally fixed than found this vid last min. Just fixed my board using this method and it looks good as new!! Saved a bunch of money on the repair and a new stomp pad. Thank you!!!
That’s awesome !!!
what type of resin did you use? I am unfortunately not close to any surf shops, so hoping to get some at Home Depot
TBH this repair looked better than the pro vac wrap repair, as no dimples. Appreciate they're different boards and dings though.
Great videos, my next SUP likely to be a Sunova on the back of this. How's the T3 tech holding up, little bit nervous of going back to poulwina as my FW timbretek cracked, in the knee zone for ducking, and sucked up water like a sponge. Months to dry and repair.
I have a epoxy lightspeed lost surfboard only had it 4 months never left it in the sun but a bubble has formed in the bottom of the board. What would you suggest I do?
I have a question about delamination , please what's the root reason to get this delamination?? Thank you so much
love these boards
♥️♥️♥️♥️♥️