Suction Control Valve (SCV) Cylinder Polish with Dremel Tool, Repair Refurbish
HTML-код
- Опубликовано: 30 авг 2017
- This video is an addendum to my previous video on how to service a suction control valve (SCV).
• 2009 Mitsubishi Monter...
In the previous video, I only polished the piston. In this video I show how to polish the cylinder of the SCV as well.
This video discusses service / repair, and replacement of the Injection Pump Suction Control Valve (SCV) on a 2009 Mitsubishi Montero Sport GLS V. This procedure should work with other makes and models Though, please do so at your own risk.
Are you living in the Philippines? Don't get ripped off by the Stealerships, and unscupulous parts dealers. Here is a link to a top quality OEM Suction Control Valve that works on these vehicles:
www.olx.ph/item/new-suction-c...
Injection Pump Suction Control Valve (SCV) Remove Service Replace Purchase For Mitsubishi Pajero Montero Sport L200 V98 KG4W KA4T KB4T 4M41 4D56 1460A037 1460A031 Philippines
![How to Remove and Replace Suction Control Valve [Montero Sport]](http://i.ytimg.com/vi/I7I-6JgDDis/mqdefault.jpg)
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
I have a Toyota Hiace D4D. It has done 250,000km. Been having trouble with it cutting out at idle while stopped and hesitating or even cutting out at low throttle position while driving. Today I pulled out the SCV and sure enough a bit of gunk in there and slight wear on piston. Fine marks as well. Polished it up as you show in the video and a good clean. Runs like new again! Thanks so much for your ideas in this video! Owe you a beer some day!
have a montero 2011, the scv didnt look the same, it didnt have the snap rings to remove the piston, i just sprayed alcohol in the holes to remove some gunk
Thanks for the video. I did this with the scv of my ms gls se 3.2l 4m41 and it is exactly the same procedure. Power loss from 1800-3000 rpm disappeared and intermittent rail pressure is gone!
Dennis Rafol I'm happy to hear it's the same procedure and it worked for you! I've heard that some have different SCVs for the 3.2l 4M41. Some may be similar as well. Cheers
MonteroGuy yep, the procedure for temoval and service is the same. Your video just saved me money :-). If yours is the 4x4 one, watch out for brittle cvboots, replaced mine at about 90k odo reading. And make sure you have regular egr cleaning. I couldn't save mine because the dc motor was shot due to sticking valve. I had to buy a new one for about 139$. I now clean it every 20k reading.
Dennis Rafol yeah, I had a problem with my EGR at 20k, I think that's excellent advice, to have EGR serviced every 20k. I have been thinking about selling EGR valves, though they are costly to hold in inventory. Thank you for advice regarding brittle CV boots. I do have a 4x4 and will keep an eye on the boots to help ensure the health of my CV joints. I appreciate the tips and feedback. I'm happy you saved money :)
6hl1suction valve coontro
@@electriccarconversion Sir please confirm SCV 1GD engine also can remove and clean the cylinder? Thanks
Hey i too have a DI-D engine the problem with mine is it cant rev up to 2500 rpm its like the engine is struggling. Is this also a symptom of a bad SCV?
Genial me sirvió tu vídeo muy agradecido
Tank U very much. More show
Looks like mine x-trail T30 have the same problem. I will do deep cleaning with pencil die grinder... Thanks for a idea👍
my x trail wont start it sating low rail pressure will this be the problem
@@markthompson1134 problem resolved by cleaning and replacement of air filter (it was soooo dirty). Best regards from Poland😎
When everything is ok, i should polished the SCV valve?
I have triton/montero 2.5 did 237000km.
If everything is ok, I wouldn't. What's the saying? If it works, don't fix it.
Very nice video sir I'm from India
Thank you. I'm glad you appreciate it.
How do you know if it is faulty ?
Great Video Can someone please tell me if I can open up a SCvalue on a 2008 Holden Colorado or is it a sealed unit? Big Thank you in advanced!
Do u still have a montero? Post more fixing videos please
What's the tool you use to remove the clip?
Snap ring remover
Hello MonteroGuy. I live in Negros Occidental Philippines and I also own a 2009 Montero Sport GLS (not the SE or V) and I'm wondering if you have experienced your oil light coming on? The car runs fine as usual, but I don't like seeing the oil light on all the time. I'm not afraid of getting my hands dirty, but I'm not finding any guidance on the oil light, whether it's a failed sensor or something of that nature. Thank you Sir!
Hi GaleForce. I own a 2009 Strada GLX same engine as yours. My oil light turns on also and i investigate what's going on and i found out that the culprit is the oil pressure sensor. I just replaced the oil pressure sensor and the light is gone or you can just disconnect the plug that was attached to the sensor.
Thanks! @@angeluripalda for the advice. I am having a hard time with auto mechanic support here in San Carlos City. Where should I purchase the oil pressure sensor? on Lazada? Thanks again!
@@GaleForcePhilippines I ordered my oil pressure sensor in Mitsubishi center. It's a bit pricey but worth the buck and a genuine part.
Perishable item, they fail, buy new.
More money than brain. Typical "credit card" approach to solve problems. LOL 😂
What's wrong about having it work for several more years without further issues. With zero cost?
Polishing them makes the bore & piston more slack it will last a little longer but will have to be replaced eventually