BMW e39 Rear wheel ball joints replacement
HTML-код
- Опубликовано: 27 авг 2024
- Parts and tools you can buy here:
www.amazon.com...
In this video you will see how to replace rear wheel ball joints without knock down alignment.
I bought Meyle ball joints as I had a lot of good experience with this brand.
But you can buy OEM part Lemforder it almost the same price as Meyle.
Parts:
Integral Link - 33326770749
Ball Joint - 33326767748
Music:
Song: Shaun Barron [Rewind Remix Release]
Music provided by Rewind Remix goo.gl/08ZthI
Song: Wonderland [Top Shelf Sounds Release]
Artists: Mitte
Music provided by Top Shelf Sounds : goo.gl/18xxWt
Song: Daydreaming
Artists: Orpheo
Music provided by Top Shelf Sounds : goo.gl/18xxWt
DISCLAIMER:
All the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All DIY projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I'm not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Some of these are affiliate links, which means I receive a small percentage of sales/commission when you are shopping using my link. Thank you for your support!
I've done this job a few time now and just a tip.....undo one side of the drop link from the anti roll bar and it's way easier to move the wishbone downwards. 👍
Thank you for your tip 👍
Unbolt or replace the upper control arms at the same time and this job is not so much of a fight!
Это лучшее видео по ремонту, которое я когда-либо видел на RUclips!!!!
Спасибо большое ☺️
Another great video. Are you a BMW certified technician? I am flabbergasted by your work! Thanks for teaching us such a prevalent work.
No, I'm heavy-duty mechanic. BMW is my hobby, I have a repair manual for them :) This is thanks for my wife, she is behind the camera.
@@mikes.garage Love you both for providing us such an enthusiastic and detailed videos.
Thank you very much! ;)
Bravo majstore
Good job mate.I'm gonna do the same job in the next few days!Bravo
Mihai-Danut barladeanu Thank you! Hope you have special removal tool or some other ball joint removal tools. Anyway good luck with that, do not rush :)
Thanks mate.Im done it already,aftermarket tool.But great job anyway!Thanks again bud
+Mihai-Danut thank you for watching )
Thank you very much for explaining and showing it very well.👍👍👍👍💯
Thank you for watching,!
Hey when you torque everything down, shouldn’t the final torque be when the suspension has full weight on it?
Yes, you are totally right! The car should be lowered on wheels for final torque, if you loosen all bushings. I left lower control arms tight, that's why I didn't put the car down before tightening.
Not for balljoints as they can rotate. Bushings don t rotate,they twist and break.
Awesome again...thanks again!
Thank you for watching!
Great Job 👍
Can u tell me the sizes on the rings That You used to take the part out please. I'm trying to take out but is been hard to find that tool so I want to build one by myself
Tank You Man
Thank you for watching! That was 2 inches and 2.5 inches rings. I hope this information will help you 😉
Tank you very much 👌
🔝
Awesome video! Thanks! What did you use ?
Thank you! I used some parts some parts from ball joint press, some big washer and all sorts of tools as you can see on video)
Where did you buy the special BMW ball joint removal tool?
I didn't buy it. I used some of my regular tools to remove it. You can buy on eBay special removal tool.
Do you have to compress the coil?
Yes, tighten fasteners to final torque only after vehicle has been lowered and suspension has settled.
There is no room to get spring compressors in.
It is possible to do the job without compressing the springs but it is difficult. It's easier if the car has air springs as they can be deflated.
@@daikiryoku i didn't have the bmw spring compressor tool but I modified another set I had and was able to compress the spring enough to get everything back in place. I wouldn't have been able to do it without it.
Where did you purchase the ball joint removal tool?
I bought it at Princess Auto
💗💗💗
What were the symptoms you were having?
The car creaked and had to steer when the car fell into a rut on the road.
@@mikes.garage gotcha. Just trying to solve my car vibration and hoping this is the cause. On my car this ball joint is pretty bad
@@radianm6 for vibration need to check wheel balance, drive shaft, and drive axles
@@mikes.garage all of that seems good. I’ve noticed that front tie rods have play and those rear ball joints are shot. Had wheels balanced when I got new tires