Bmw Rear Bushing (Ball joint) Replacement
HTML-код
- Опубликовано: 31 авг 2019
- In this video i replace the rear Bushing (Ball joint) on a Bmw 5 series.
Enjoy the video!
Check out Cody's channel channel;
/ @codysautodiagnosticsp...
For Business inquiries; Diagnosedan@gmail.com
Join me on Facebook! 
Авто/Мото
I've never seen any tutorial so clear and professional as this one! Good job Dan and thanks!
yea bro this man is wery explaining and advising you about any erors or posible mistakes
i would love to see more of your mechanical videos as well,
I might do a few more😉
@@Diagnosedan thank you
Your my new hero Dan. The correct tool for every job and the skills to use them properly.
Awesome job Dan!
Thanks buddy😊👍
Mate...you are Michael Jackson of mechanics..simply entertaining at its best...this is purely old school wrenching taken at entertainment level..like watching a good movie
Uuuuhhhmm, i'm dead?🤣🤣
@@Diagnosedan no mate...Michael Jackson will never die:)
@@domualex 😉 Love his Music, i was a huge fan as a kid. I even had that red and black leather jacket
Dan . what can I say... Ive had my BMW 530d for 8 yrs. Ive watched countless youtube vids about replacing various parts. You have the GIFT my friend. You leave the rest behind. Thank you for your clarity and expertise
I couldn't have said it any better! 1000% agree! with TheFokker50.
Dan's arms need to be sponsored by Snap On, build tough! 7000nm torque 💪per arm. Nice video Dan
😂😂😜👍
Diagnose Dan Fixed it Again now Diagnose Dan Wrenchin’ Again...
Great teaching and content A+
This channel continues to be a stand out in its technical field.
Thanks for the great comment, as always 😊👍
DiagnoseDan you never cease to amaze, there are so many types of diagnostic work. And parts changers would tell you that you need a new hub. Great video. Eric O would have to break out the torch because of the rust lol.
Yes Eric loves to use his torch!🤣🤣
Yes you would need the torch where I am as well. I'm in London On Canada about Three and a half hours from Eric O's in New York State
Where have you been? No diagnostic videos posted for many months. Great to see you back. I was surprised that you didn't spray penetrating oil on the threads before you loosened the bolts, and also that you tightened the wheel bolts clockwise, rather than doing the opposites, ie 5, 2, 4, 1, 3 on a 5 stud wheel. The torque wrench just showed the wheel bolts were tight, but the airgun might have over tightened them firstly. Electric cars aren't selling well in the UK, so it's good that you stopped making videos about repairing them. Great work, thanks.
I posted a diagnostic video 2 weeks ago😉
@@Diagnosedan Oh, right, thank you. I've been watching your videos on a large smart tv, which doesn't give me the same selection as the computer.
Another great video Dan!
Even if you think they are common or regular servicing items, because people do it differently, there's always something new to learn or new discovery to be made. For instance, on this video that plastic rotating brush fitment to clean the aluminium part was a really good tip. In conjunction with giving a once over regarding the importance of SST (Special Service Tool) in certain tasks will educate young mechanics and DIYers - extremely vital and very basic but often overlooked.
Many thanks once again for your excellent work and generosity in sharing the vital knowledge with us.
Thanks for the awsome comment it's appreciated
Brilliant video, thanks Dan. It’s great to see mechanical repairs performed and explained with the same clarity as your diagnostic videos. This makes the work so much easier for those who find repairs daunting. I really enjoy your Chanel.
I really like that integrated bearing in the bushing tool. Yes, I like the repair videos a lot. Please make more.
Thanks for your comment!😊👍
I don't work on to many European cars right now, but watching you I feel more comfortable dealing with them. There is only one shop around here that works on them and since the owner passed away they haven't been the same. My customers that do own them are very patient and don't want anyone else working on there car including the dealerships in New Orleans 60 miles away. Yes definitely more videos on mechanical repairs, and diagnostics, maybe more videos per week, although I know it takes a lot of time especially with the great video quality you produce. Thank you for taking time to make these videos they are greatly Appreciated!
That's great to hear, thanks for watching my video's it's appreciated
I like your camera work while doing the repair. I really like your diag work. Makes real sense. Thanks for sharing.
Loved it, you are still very methodical in all you do. Thanks dan, it’s a pleasure to see you work I could watch you all day.
The mechanical videos are really good too! Love to watch other mechanics work, always seem to come away with new tips and tricks (like that plastic cleaning brush), so thank-you for that!
at 76 years old i always coat the metal parts with coppergrease to prevent any electrolytic corrosion . It makes me happy for a job well done .
Really an excellent video showing the job replacement as much as can be, with tips and widely explanations about every step taken. I enjoyed it. Thanks Cody.
This guy shows the BEST video on replacing rose bushing - too easy - Thanks DAN - I was afraid to do it until I saw it - CTA 8692 works great for this bushing
God that is dedication! Doing things the hard way so people can learn! You are awesome!
Love your work Dan! Love to see more mechanical work!
These are great videos. It's great when a professional takes the time to share what they know.
Nice to watch a mechanic that does not get scared of a repair job just because it is one of those "Fancy" brands BMW. I own a BMW myself and do my own work on it. It is not a NASA science project to work on but you do have to sit down and be willing to learn how it operates. Good job and i am looking forward to watch more mechanic videos from you in the future :)
When I was 13 years old began working at my dads tire shop. We were taught always tighten lug nuts using a star pattern. Did that method change? I love the video. I learned how to remove and replace these type bushing with a specialty tool I didn’t know existed. Thanks for all you do Dan!
Personally and I do not want to pick at the work yes I agree with the practice of as you put it a star pattern to tighten a wheel. It prevents the wheel snagging at an angle. I also think the snap on electric gun if you check in fact over tightens the wheel bolts even with only letting it dugga dugga a couple of times, they are far to powerful on bolts like that. The torque check at the end ought to have tightened the wheel bolts up more to the correct tightness. It only clicked due to it being at the correct tightness or beyond it already. From my experience it will nearly always be too tight. I would also recommend to the customer we did 4 wheel alignment although it was marked. If the customer declines then a premature worn tyre is not able to be blamed on us. Still enjoyed the content as always don't like to knock what you do just feel it is always good to get feedback whichever way it is.
Your right about the way your dad taught you how to tighten the wheels. I would recommend doing it that way.
@@MrSteve6343 i recommended an allignment! But is was declined by the owner
@@Diagnosedan Typical...Can afford an expensive car but can't afford (or too cheap) to complete the repair.
wysetech2000
Luckily the customer does have enough money for new tyres. 😉
This tutorial was super detailed and the best on youtube that I have found... Amazing! Thank you so much.
I like both the diagnosis and the mechanical work as well. Both are very informative.
Thanks for the feedback!😊👍
As a mechanic myself. I like your workmanship and proper tools makes the looks like chalk and cheese👍👍👍
Thank you Leslie
THANK GOD they put that snap ring into place, to hold that ball joint in!! That way, the corrosion, and the unimaginable forces wouldn't be overworked!!
Nice one Dan, thanks for sharing!
🤣🤣😜👍
Hi Dan, this is great to see. I reckon your videos are better than Wheeler Dealers, you deserve a greater following. Anybody who is a car fanatic will learn from your videos. Thank you.
Its great to have a mixtures of video's on your channel! Love the mechanical side👌🏼 keep doing what you're doing Dan!
Thanks it's appreciated!
Great attention to detail, your customers are fortunate to have you work on their car.
Mechanical repair is interesting to me. I like the variety. I’ve admired your electrical diagnostic ability. This shows that you are very well rounded in your skills. I think that you and Eric O came from the same mold.
🤣🤣👍Thanks Brian
Hey guy's Check out Rainman Ray's he is good too
Great video dan and nice to see it done properly!
I've seen countless mechanics/technicians over the years tighten bolts with the suspension hanging down in the unloaded position .
This is OK for the bush you've just replaced as it's more like a ball joint but not for the rubber type bushes which you know will fail again in a very short period!
Once again a great video and nice to see it done correctly.👏
Wow I didn’t realize this was your first one, they just keep getting better!!!
Dan. Your are the best on Internet, So enthusiastic charisma you have. Best tutorial on Internet. Thanks for sharing. Many thumbs ups.
Nice video Dan! Great explanation and now I have a new tool to add to my arsenal. Finally picked up a pico as well! Again thanks for all your efforts to help us less experienced guys become better techs!
Very clear explanation. You're a natural. Keep up the good work.
Excellent video Dan! You do awesome work and videos on anything from Diagnostics to repair videos-no matter what it is!
Love Cody, he's such a great guy who is so knowledgeable!
Really enjoyed this one, so thanks for sharing this with us!
Thanks for the great comment buddy it's appreciated!
Dan your videos are outstanding. The camera work is outstanding and the way you describe what you are doing is excellent. Oh and by the way the shirt is perfect. Cody’s videos are also excellent. Have a good one Dan ❤️
Hi Dan
Thanks again for another great video, I’ve done a few of these bushes and like yours I’ve had a few tight ones!!
Can’t believe people EVER give you a thumbs down, As I say I’ve done these before but I still watch the videos because of how great you are at explaining jobs and I always recommend your videos to other mechanics and they always thank me and agree you great at what you do👍 👍👍
Keep up the great work mate and I guess ignore those thumb done jealous sad people that ain’t got a clue!!!!
Cheers Lee
👍👍👍👍👍
I liked this almost as much as your diagnostic videos. Please do more.
nice to see you didnt put the windy gun on the thread to remove the bush,yes more please ,you explain really well, as always
Thanks Dave!
This one really gave you a workout! Great to see the professor getting his hands dirty so to speak. 😁 Your hole cleaning techniques are also spot on! 😂
🤣🤣😊👍
I'm no mechanic but I know quality work when I see it. Great job!
Every time I learn many things from you. Thanks.
Thanks great!
Great repair video Dan, love watching any video you put out, they are always top notch! Also thank you so your support buddy!
A cool guy like you deserves more Subscribers!💪
DiagnoseDan well Dan that means a lot and can’t say thank you enough!
Thank you Danny! I just love your car lifter, is so handy and small! I also like your bushing puller and your aluminum cleaning brush
Thanks Argeny!😊👍
Enjoyed the video just as much as your diagnostic vids - thanks
Great!😊👍
Excellent video how to do this bushing change, without having to change the whole suspension on the car !!! Quality guy doing quality work with excellent explanations.
Thanks David!😊👍
I was surprised to see you didn't use the ratcheting wrench on the removal part! I replaced all rear 8 bushings on my e90 and didn't have the 24mm ratcheting wrench at the time, so the removal and reinstallation took some time. I watched the entire video and didn't even need to, Lol. I think this came up as a result of watching one of your previous diagnostic videos. You explain what you are doing very well! Good stuff! New Subscriber. Thank you!
Thank you from Vancouver Canada for the great education
Very professional! I'm glad I watched this video.
As always Dan , no room for improvement .
Yes to more repair videos.
Thank you
Thanks for the awsome comment!😊👍
excellent work Sir and you explain it in excellent detail.. very best wishes from NZ
That was a change of pace for you, enjoyed the video . Would like to see more of repair videos.
Dan, from Diagnostics to nuts & bolts job. You are Awesome !
Thank you David!
I’ve just watched a video of a guy struggle on the floor to do this repair. As I’ve worked many years as a mechanic on the floor doing it with it in the air using good tools man is that so easy excellent video 👍🏻😉🙏🏻
Love the repair video as well as the diag videos.
By the way awesome shirt!
Thanks for sharing with us Dan!
Your welcome Angel and thanks for watching my video's it's appreciated
This reminds me from when I had to replace the rear wheel bearings on my E36 318i and getting one of the driveshafts out of the hub was the hardest part. Changing the bearings was the easy part. It always reassures me when the wheel nuts are torqued up properly with a torque wrench and is more important with alloy wheels.
Best Channel on RUclips
Thanks, job well done, Dan, you're a true all rounder !
Thanks your comment is really appreciated!😊👍
I was going to comment on the lack of star pattern tightening but I see you have been berated enough on that. I guess my reason for commenting was that I am always in awe of your abilities and the way you explain your diagnosis , so when a "mistake" like that happens (You probably usually get the apprentice to do tyres) everyone jumps for joy! ha ha , "we caught the King making a boo boo!" Keep up the great video's and I feel repair video's are another feather in your cap!
Love your diagnose videos, and this mechanical video are great too! Keep it up, love your content!
I love all of video it's full of quality jobs which is given by you only and I learn lot
Nothing wrong with getting your hands dirty... I watch any / all videos you post! =)
Thanks Thomas a comment like this coming from a guy like you is what keeps me going. Its really appreciated👍👍👍👍
I love working on cars with you, Dan. My hands never get dirty! 😂
Don't alter a thing Dan. I think this presentation is spot-on. Show more vids like this
More repair video's is always usefull and fun to watch..
I own a e61 nice to see more repair vids Thanks Dan
This was an enjoyable video, please definitely do more of this type of video, I really did enjoy watching it.
Thank you very much, i'm glad you liked it😊👍
Its good to see Danny isn't afraid to get his hands dirty with the basic stuff.
You should be a tutor at a Polytech Danny.
No, wait, how am I gunna learn from you then?
Great stuff as usual.
I just did the same job three weeks ago here in boston on a bmw x5 thanks for the helpful video
I liked the video alot. I'm not familiar with Euro cars, this makes it easy to understand
Glad it helps!
It's good to see how work I have had to have done is actually carried out.
You make it so interesting to watch!
Always a delight to watch
Awesome. It's similar to the X5. When I have to do this I am now informed. Thank you!!
Carry on Dan! Thanks for new video! Good to see you doing different jobs as well!
Great to hear!
A welcome change up is always nice. Cheers
Thanks!
Love the Bloopers at the end, keeps it real. Thanks Dan, another great Video.
Thanks Ron
No matter what you are doing, you are the best
Please make more videos, thnks
Great to see you wrenching 😁 Had to get used to it not seeing a scantool and scope 😉 Thanks for sharing! 👍
🤣🤣Some days are oldschool😜
You did it again dan. Amazing video buddy. Great job from Santa Cruz California. I have learn a lot from your videos 👍🏼👍🏼👍🏼
Thanks Chris!!!!👍👍👍👍👍
I watched the entire video! I enjoyed it, you do nice work sir.
Glad you liked it!
Good stuff DiagnoseDan. Keep them coming!
That was a good workout Dan! Not like Eric O with all the pneumatic tools that remove wheel bearings in seconds haha 😁👍
Oldschool this time Ivan 💪
Eric is shipping Dan 'BIG NASTY' HEHEHHEHEE
Nice! Representing Cody's Auto Diagnostics! Hopefully we can get you over here to visit one day, one of our training events. 😉😉
Awesome to see the day to day Dan at work, and turning wrenches! You make it look too easy! 😂😂😊😊
Definitely would be nice to get Dan over here for some training and meet and greet 😄
Thanks Cuba it's appreciated 😊👍
Great Video Dan, Yes I would like to see more of your repair videos
Thanks for your feedback!😊👍
Just found your channel, thank you for this as I am about the change rear bushings and arms for this model.
Yes! YES! More Mechanical Diagnostics and Repair Videos Please. 👍👍
Also - Glad you Didn't edit out the "Pain in the . . ." Commentary. ☺️
Good to see you again DD thank you nice work
Thanks Enrique
Great job my friend. I would enjoy watching more of your mechanical skills too.
The notifications are on still not getting notified love your stuff
Great video again Dan, nice to see a workshop workout 🤣 those bushes sure can be stubborn.Keep up the great work 🤙🏻
everything from you is fantastic
Nice work Dan!
Surprised you don't have a STRONG impact to drive that out? You're a great mechanic Dan especially in Diagnostics
What a clean and good job, superb.
DAN that was a hell of a work out !!!!!!
Love the nuts and bolts videos. Especially on the BMWs.
Great! Thanks for watching my video's it's appreciated