Using other hot foils in the Gemini FoilPress
HTML-код
- Опубликовано: 9 фев 2025
- I experimented using different brands of Hot Stamp foil: ToDo hot foil, Spellbinder glimmer hot foil, (Anna Griffin) Couture Creations Go Press & Foil against the Crafter's companion paper foil in a stamp & foil die and a cut & foil butterfly die.
(*update* I was able to get the other butterflies lined up and re- foiled them at medium heat for 45 seconds with the other brands. Check the Fairy video.)
gohsn.co/Crafte...
gohsn.co/Crafte...
bit.ly/2zhA7TW
bit.ly/CCHSNNov18
*The examples and experiments I demonstrate are at my own risk. I recommend reading the user's manual before starting a project. I am not responsible for any damage you may cause to your Foil Press or Gemini. I am not affiliated with HSN or Crafter's companion. Crafter's companion sent me the FoilPress machine to review and give my honest opinion.
Thank you for not editing out the mistakes! It saves time for us watching, what works and what doesn't. I found this video on using the Gemini FoilPress awesome. Thanks. I am subscribing to your feed. Thanks so much!
I am enjoying these Foiling videos, along with all of your other videos. Thank you Nancy for such a thorough job.
Love it that you just film it, the way it goes, so honest, thx, so good 4 my confidence, knowing i can try again and again, and that that is fine! Thx so much 4 all those amazing videos!! 👍
Thanks so very much for this video!!! My simple mind is thinking....well if it has to get hot....minus the minc...it should work in the machines. I am at 31 minutes into yours and this does seem to be the case!! I asked yana smacula....of course, her demo is with Spellbinders and she did not want to deviate...which I fully understand but when it comes to my pennies I want them to stretch as far as they can! I can not tell you how much i appreciate your video showing the foils. I much enjoy all of your others as well!!! Kudos!!!! Blessings!!!!!
Thank you! Binge watching all your Foilpress videos in anticipation of getting it soon. 😊
I purchased a pack of 9 - 3" rolls of hot foil from Ebay seller for like $20. I struggled to get the foil to completely adhere - and after watching this video, I think I will try hotter temp for a shorter time. I also didn't know about the double metal shims for cutting the hot foil cut stamps. I have the Gemini foil press - and after about 15 minute of use, I noticed the plate was warping. However, after letting it sit for a while, it straightened itself out - so maybe it was just too hot. I was leaving it plugged in between tries. Anyway, thank you for your tutorial - I learned a lot and will now go back and try that foil again. It is a great buy, from a US seller so it arrives quickly. Anything that offers a savings is a win in this art room :)
Maybe that's why they want you to put the metal shim down first and then the stamp and cut die. The metal shim probably helps to transfer the heat. Just a thought. I love this system. It is definitely at the top of my wish list.
I have had the Go press & foil for about 12 months & I have had 1 successful foil? I have spoken to them several times and have tried various ways of using it without success. I have ordered this machine thanks to your tutorials. Your comparisons are very reassuring. Thank you for your time in doing the tutorials.
Thank you for doing the foil comparison for use with the FoilPress. I have the AG Go Press N Foil machine and have AG, Couture Creations, Todo & Crafters Companion foils. This video was very informative and I am anxiously waiting for my FoilPress to arrive!
Thank you for the time you take to help us (me) understand how to use this machine.
Hi Nancy I just subscribed to ur channel I gotta say it's a pleasure to hear u describe things. I can actually understand you. Too many people are quite the opposite. I looked thru all the videos and can't find the fairy one u mentioned. I'd like to see the update u did about the foilpress as I bought one and am stumped about using other foils. Please do me a favor and post it for me? I look forward to many more. Happy Holidays, Debbie
HI Debbie, if you go to my RUclips page and click on playlist there are all the videos for the Gemini and I opted not to get the Fairy set from HSN, I got the Hero arts set cheaper.
Nice job. Thank you for sharing you experiments and knowledge with us. Ordered a Gemini Jr and the FoilPress, anxiously awaiting their arrivals.
MariAnne Damkroeger Did you order from HSN?
Yes I did. @@nikkihoffman2891
This was super helpful. Thanks so much for the trial and error. That way I can make an informed decision for myself.
Hi I have had to work this out much like yourself. I have noticed that if I take it out and test if it is transferred whilst it is still warm it does lift but if you put it aside and wait until it is very cool it will have shrunk minimally which means it is attached. I hope this helps and if it helps. But definitely leaving it to cool after it has gone through the gemini is what is needed most. Happy foiling x
Hi Nancy, I love the videos, they are very helpful. 😊 I just want to suggest you using a rotary cutter to cut your foils on your cutting mat, so much easier! xxx
Margaret, I do. This video is 4 years old. Lol
Thank you not editing. It helps me tremendously seeing trial and error.
Thank you Eugenia. I know it makes the video longer, but I have had several people tell me the same as you.
Yes, I also like non-edited version. Great learning process.
THank you for the tutorials I have just ordered mine on Hochanda befor the launch so I'm watching your vids so i will know what i'm doing when it gets here
LOL!. x
I just bought the Spellbinders Foil Machine. Love the videos. Thank you for sharing
ALL THESE YEARS LATER, I CANNOT FIND THAT LARGE BUTTERFLY TO SAVE ME !
Here you go: amzn.to/3yvyNPu
Really enjoy your experimentations. Keep them coming.
That’s such a good tip for the waste, thank you! I bought a second hand Todo, it had no power supply but I had one from an old dead die cutter that works. I’m trying to work out if the Gemini dies and plates would fit the Todo hot plate, I’m hoping you can tell me.
Carol I have old ToDo videos on the HotFoil folder. Yes, they should fit because you can adjust height in the ToDo. Also search ToDo had their own channel.
@@NancyStamps thanks, but I wondered if the hot plate is large enough for them really.
Excellent video. I'm waiting for the Big Shot video.
I like that fact you are experimenting in this video. It is helpful to me. I have a Minc machine. I don't even use it because I could never get the glitter paper to go through without bunching up and the carrier sheet being ruined. I just received my Gemini FoilPress and am looking forward to using it. thanks for the help! I also bought a Todo a couple of years ago. Worst purchase ever! Not kidding.
Yes, I hate my ToDo machine!
No wonder I saw it for $27 on sale a couple of days ago on Create and Craft
Thank you soooo much for all your videos, it is very much appreciated. I'm new to foiling and you answered so many of my queries in this video. Bless you much!
Go to HSN, pull up the Presentation video on the CC Foil Press page where Sara shows how to use it during the launch. She used the Happy Birthday die, a regular die that I have which was for sale on the program, cut a die cut which she foiled with the fancy silver foil. I have the Couture Creations machine and I was amazed that she could do this.
Ok I see what she did. I'll try to replicate it. She actually foiled the die cut paper.
@pawprintx4 I got it to work, video is uploading now. I'd like to mail you a card for your idea. If you can send me your address to NancyStamps15@gmail.com
Thank you for testing it all the ways i.e. with other companies foils and dies do we see what we can use from our drawers. 😊
Hi Nancy I have just subscribed to your u tube channel you are absolutely FAB at demonstrating your video tutorials you are my kind of person I love to watch you demonstrate your tutorials as u are so very clear and explain so very well thank u so much for taking the time to do this ☺️👍 .......l have a question to ask you have u used FOAMARON AND FOILED IT if so please can u do a video tutorial on how to do it I will be very grateful MANY THANKS x Lin in South Wales uk x
What is foamaron? This is something I will have to research. Sounds fun!
Hi Nancy thank u so much for taking the time to reply to me because u must have a very busy schedule I was very grateful thank u ...... foamaron is a special foam 6mm so it is very thin very versatile u can use cutting dies with it colour it and heat it with an warm iron only and then shape it to make really fab large or very small cute little flowers u can use staymans or gems with it ....BUT I HAVEN'T TRIED IT USEING THE NEW GEMINI FOILING PRESS ....I really hope u get this reply and I hope it was of some use to u .......this is a VERY big 👍 up to u xx Lin in South Wales uk
Nice job! Can you show how you have used foils in your crafting?
Nancy, can you use Spellbinders glimmer plates in the Gemini foil machine?
Yes I do
I have really learned a great deal watching your foil videos and I like that the Gemini FoilPress can be run through a big shot would you know if it will work running it through a big kick?
Thank you.
Yup, email me. NANCYSTAMPS15@GMAIL.COM
Your videos are great! Thanks so much for all your testing with all the different foils. I have a vagabond and wondered if it is compatible with this system.
Jane, it is not recommended by Crafter's companion other than using with the Gemini.
Nancy Stamps. Thank you so much for your feed back. Craft on!
I want to see the follow up to see how to solve these problems...of not a full foil..........great program....I'm learning a lot. pat
Can you use the go press and foil foil without that machine?
The Go press n foil is a hot foil, not toner foil.
Awe now I see what you have done it has took it off altogether Brilliant thank you for sharing
Can you use Deco Foil? And what is the weight of the cardstock you are using? Also I love the trail and error
No deco foil is a different foil, please see my video on battle of the foiling machines in which I demonstrate. The paper is Neenah solar white 80lb cardstock.
Hi Nancy I commented on your fab video tutorial u posted on u tube on November 7,2018 i learnt a lot from your tutorial thank u 👍 PLEASE CAN YOU POST A TUTORIAL ON U TUBE ABOUT HOW TO USE HEAT RESISTANT ACETATE will be very much appreciated x Lin in South Wales uk x
Great instructions. Can I use my minc foil?
No. Minc foil won't work. See the "battle of the foil machines" video in which I demo minc foil
WOULD IT BE POSSIBLE TO PUT IT THROUGH DIE CUT MACHINE TWICE?
Yes, you can foil and cut or cut and foil. I had better result if I foiled first and then cut, sometimes a couple of passes or longer heat made them come out better.
All I can say is thank you thank ya thank you! What would I do without you:)
Thank you for doing these videos - so helpful. I did have a question... do you think it would work with deco foil? It’s what I have and I’m just wondering...
Unfortunately it will not, two different types of foiling systems.
Hi!! Unfortunately I already bought the Glimmer Hot foil System. I’m trying to do some projects on cotton paper and the results are horrible. I get foil all over the paper. Have you ever had that problems with the Gemini? I watched a few tutorials for the Glimmer and but they were all sponsored.
Lower your pressure with less shims and cut down your foil to size around your die. Also try not to over heat. It takes practice with all hot foiling systems.
Nancy Stamps Thank you for replying so fast! The Glimmer only have one set of heat and time. I tried putting the die and only leaving it for 10 seconds, 15 seconds, and the results were horrendous. My paper is about 350gsm, but I also tried it with linen paper, metallic finish, cheap paper. 😭It was a hot mess! If I had know, I would’ve bought the Gemini.
Hi! I just ordered the Crafter’s Companion foil Press through your link to HSN. Only after, I realized I should have asked first if it will work with the original size (the bigger one) Gemini embossing and die cutting machine which it is the one I have. Does it? I hope so. Please let me know. Thank you for sharing. Never mind, you answered my question at the end of the video. Thanks!
yes, you need to buy the adapter plate though because the opening to the regular gemini has 3 sensors and the FoilPress onloy triggers two, so the adapter will trigger all 3 to turn the full size gemini on.
Nancy Stamps Ok. Thank you for the information.
Where may I buy it? They don’t have it at HSN.
@@nancyagudelo4625 I got mine from HSN they were on delayed delivery but I got mine today one day after receiving my foil press.
Nancy you aren’t supposed to keep the foil press plugged in - you are to pull it away from the base between using - according to the designer Leeann Chivers of Crafter’s Companion it shortens the life of the machine - she has a video on Facebook Crafter’s Companion
Good to know thanks Marlene. I don't plan on using it that much but I will mention that in my next video.
Nancy for the hot foil cut stamps you should be using two metal shims, one on the bottom and the Gemini metal shim on top. Have a look at the DVD instructions x
So interesting and thurough. Superb job my dear. 🎄🎄🎄
What a disappointment on the glimmer foil from Spellbinders. Just when I thought how can they possibly be so different and you showed me differently. I do not have any of the pressing machines yet but so far I like this one. How does it compare price wise to the Go Press and Foil machine? Maybe the Glimmer foil will work with the old school techniques with double sided adhesive. I played with the G-P-F foil and the Minc foil and they both worked excellent this way Maybe you can do this to use the negatives from your butterfly. Die cut a butterfly from any double sided adhesive, peel off one side, line up the negative, run through die cut machine to adhere it well to the adhesive. When you peel of the cover sheet there will be exposed adhesive which you can either double foil or adding glitter. Peel off the back adhesive and stick where ever. Not my original idea. I saw it on Scrapbooking Made Simple. I believe it was video #142
I got the othersfoil to work with heat setting on medium for 45 seconds and I was able to get the waste foil to stick using a sandwich of foil, paper, 2 shims, magnetic shim and top plate. Check out my Gemini Foil Press playlist for all the fun videos. :)
Nancy, what about embossing folders with this system
On this weekend's list to try.
Thank you, I will be awaiting to know how is going the things, sad, that I can't to found this system with euro plug
So, it looks like the cut edges get foiled some as they cut. Is this just some incidental foiling here and there or do they have evenly foiled cut edges.
Yes they do because they are raised. Easily erased with mono sand eraser
Thank you so much! I just ordered mine yesterday
I have a large amount of foil by "GoPress and Foil by Couture creations, Distributed by Artdeco Creations" and I need to know if that is the SAME as your "(Anna Griffin) Couture Creations Go Press & Foil"? Also are you having good results with yours with this machine? Thank you!
yes same foil, and yes, good results with longer time and heat. Try medium at 45 seconds.
Rose Terry Couture creations makes a few machines for different sellers. Same machine different names
Where else can I buy the needed foil paper other than HSN? When looking for the foil what would I type in to fi d the foil for this machine. I know there's a different foil but for laminating. Thanks
Couture creations, ToDo, & Spellbinders Glimmer foil is what you can search for. Scrapbooking made simplest has some and so does Simon Says stamp. Make sure your search for "hot foil".
I was able to get the non-branded hot foil to work. 45 sec on medium heat using a Spellbinders stamp press die. The one remaining issue I have is that no matter how I try, I can't keep the die aligned with the cardstock. I am trying to center a mask die on a 4x4 card. Once I put the foil on the die and then lay down the card, I can't see if it is aligned. Would anyone happen to have a trick for keeping them aligned? I watch so many videos and half the time the die is crooked on the platform - but also, they are not using a finished card - just cardstock. Any advice is most appreciated. Thank you!!
Do you have the Go Press ? And if so, can you do a comparison between it and the Gemini version?
Yes and you betcha I will!
Neenah Classic Crest (solar white) or Neenah Exact Index (solar white) like sold in big box stores and not as high a quality as Classic Crest? Thanks, and thanks for the informative and natural video! : )
Neenah classic crest solar white smooth, I purchased it from Amazon. Not the same as the big box stores.
Can you use the foil that you use with a laminator? Like Gina K..thermoweb?
No, it is heat activated foil, not toner foil.
I believe I heard you say you have a laser printer....have you tried stamping an object or saying on paper and then make a copy of that on your laser printer and run it through your minc?
Yes, I have done that with background stamps and foiled them.
How about just putting the actual plate back on top of the foil. So that the heat from the plate got hot and the foil stuck underneath it? Would that work?
Fabulous to watch thank you
I would suggest to put the foil while you have the die getting hot that way the foil heat up too.
Ok, we will try it.
This was very helpful. Thanks for sharing.
It appears a lot more complicated than my GO PRESS AND FOIL machine! Try watching Stacey on Saturday with Stacey on RUclips.
Polly Weinmann I don’t think this one is more complicated. I think this one just has more options. With the one Stacey has, it just has one setting.
Where did you get the hotfoil butterfly that cuts, foils, and embosses?
Hsn, Crafters companion cut & foil die
Hi. Can I.use the genini with the big shop plus machine?
No, you have to get the Spellbinders Glimmer.
When Sara demoed on HSN, she foiled a die-cut or so it seemed. Can you do that? That would really open up a lot of possibilities.
Yes with their stamp & cut dies. I also did a video on using other dies, that has some more info on dies.
If you watch the HSN demo, Sara actually foiled a die cut (ordinary die/ CC Happy Birthday). I know you can foil the Cut/Foil Stamps. She foiled the pre-cut die cut and it covered entirely. I didn't know you could do that....
Are you sure it wasn't a foil stamp die? Only the outline will foil on a regular die. The foil stamp dies are made specifically for foiling, not cutting. I have the new foil stamp dies ordered. I'll demonstrate and you can tell me if it's the same one.
@@NancyStamps
@@pawprintx4 I got it!! Uploading the video now.
I can't find it, can you please send me a link.
Thanks Julie
www.hsn.com/products/crafters-companion-gemini-butterfly-stamp-n-cut-dies/8833734?query=8833734&isSuggested=true
Can you only foil dies or can you use toner sheets with images? Thank you
No, 2 different machines and foiling systems. Please see my battle of the foiling machines video for more clarification.
Is it because the butterfly is the wrong way round that its not sticking
What about deco foil? Will deco foil work?
No, I'll demonstrate that in today's video. Keep an eye out for it later.
Nancy Stamps ok thanks
What about putting the temp higher on the other foils?
Yes, medium heat for 45 seconds seemed to have worked the best for them.
I could not get foil press part to go through the gemini companion. I did the trial and error steps that you did and nothing happened
which Gemini do you have? Is it the full size or the Gemini Jr? The full size Gemini needs an adapter plate to trigger all the sensors.
@@NancyStamps I had the Gemini companion but I returned because it did not heat up and I thought that was the problem. I will look up the adapter so that I will have it when I get exchange. Thank you for your quick response
To foil the waste of the butterfly on black c/s you need 45 seconds to heat, and use the magnetic plate along with the top pplate!
Does cricut have a foil that can be used??
Cheryl I am not familiar with cricut. I know they have vinyl foil and heat transfer foil for t-shirts?
Cheryl Lemons the cricut does not make hot foil. They have foil for T shirts but not heat reactive foil 😊
So far all the foil stuff still is confusing to me. I have a Spellbinders Platinum and now wonder which foil machine is best and can be used with the Platinum and is it possible to use other brands dies in other brands foil machines just like cutting dies...that u can use in any machine?!? need more infos before I decide to buy a foil machine.
Legolas (love the name) if you have spellbinders, try the spellbinders glimmer machine. Yes, all wafer thin dies will work and yes all hot foil machine foils will work. I have done a couple of videos, so take a look and then decide. Also Yana Smakula did a few nice videos with the Spellbinders glimmer machine.
Hannon le Nancy. Thank you for your reply. So the crafters companion foil dies will work in the glimmer machine, too? I watched several vids of you but could not see if I could use the crafters companion machine with the Platinum...or if I can use the stamp n foil dies of crafters in the Platinum. So far I havent found the glimmer machine with eu plug but they already sell the foils and dies all over.
yes the foils will work in both machines.
Did understand correctly that there is an extender plate for use with the regular size Gemini?
Yes or it won't go through the machine. It has to trigger all 3 sensors in the regular Gemini
I looked for the butterfly on HSN and don't see it. Is that where you got it? It's gorgeous!
I found it on HSN. Been watching the foil dies and stamps. No sales but flex pay
Didn't they NOT to use other companies foil in CC machine?
Why not? As long as it is hot foil. You can't use DecoFoil.
Excellent videod!
Awesome
I have so much foil for the laminator. I know I got to use that up before ordering a different foil for a completely different machine.
OMG! I have tons of laminator foil I will never run out!@ yikes!!
great job :0)
I think it is upside down.
What's upside down Babs?
Broke down and bought some creative vision foils and a stamp or two!!!
You will not regret it.
Anna Griffin is 15'
Thanks Polly
I would try heating up the sandwich. I e the paper the foil the shim everything been running through the Gemini.
Yeah that worked better and I did 45 seconds with medium heat for the non CC foil. They worked fine then.
The machine came with a manual. Why aren’t you using it? There’s a chart that tells you the exact temp and time for each size foil stamp.
I was following the directions for Crafters companion foil. But the manual is only for crafters companion foil. I am using other brands of foil. They aren't the same as crafters companion foil. They took a higher heat and longer time to adhere. ToDo foil, Couture Creations foil and Spellbinders foil.
Thank you for the information. It's helpful to know that not all hot foils are created equal, which is surprising. I'm trying to decide between the Gemini, Spellbinders and the Go Press. I have the die cutting machines that will work with all of them so its just a matter of choosing between which machine which will give the best results and that also doesn't overheat or shut off too soon. Thank you so much for your videos. They are very helpful.
@@Luluscraftbar no problem Sherri. There are advantages and disadvantages to all of them. But I think you have to sit down and figure out which system will work best with how you craft. I'm here if I can help you in anyway. Thanks again.
You are all over the place....videos are too long.