After 3 yrs my Envaya is running well and love it. It would be interesting to know how we could replace the batteries. I use my speaker 4hrs a week minimum.
I would like to know this as well. My battery is giving some trouble. Not charging fully, and self discharging. Have tried the reset and everything. It’s open in front of me right now. Unable to get to the battery.
Did you try going "deeper" in the end? I would like to buy but if it's hard to change the battery pack DIY I probably won't. Those li-ions will die in a year easily if they have self discharge issues in my opinion. How were things in the past with Denon bluetooth speakers? Did they ever addressed issues with older models and did some firmware updates or they don't give updated on their products?
Well that kinda sucks. I saw they had some firmware updates for their other gear but couldn't find anything on Envaya line. They should really do something for speakers. I like it as it is with few of the flaws it has but googled about the old envayas and see bunch of them stopped working after some time I think I might pass on 250 . Or at least wait a year and ask for a review then :D
@@gammelgemse I got jbl flip in the end. Great speaker that one. Shame it had problems with this and that. It seems denon always makes something amazing like that but then it has weird flaws.
Hi Toni, i have a question about a static nosie on low volume. Did you notice that problem? I have Bose Revolve+ and it's very audible especially when you listen to quiet music.
Auch hier kann man mal wieder sehen, dass sich Lautsprechermembranen bewegen müssen, um Schallwellen zu erzeugen. Nettes Video, jetzt weiß ich etwas besser Bescheid über meinen Speaker, ohne ihn selbst auseinendergenommen zu haben, danke Tony! Ich hab geahnt, dass er größere Treiber haben muss als mein Flip 4, weil doch einiges mehr an tiefen Tönen heraus kommt. Komisch, dass Denon schreibt, dass darin 40 mm Treiber verbaut sind. Daumen hoch für's Video!
Hi Toni, Are the drivers wired in reverse polarity so the radiator pushes out rather then in during a bass thump? Building my own speaker hence the interst. Love yr vids and hello from Penang!
richard attoun if you can find the Denon for that price it’s still a great option the Anker Soundcore Motion+ is another great choice and it’s always below 100$
I'm having issues with the battery only charging to 50% after less than a year owning it. Apparently Denon has discontinued it and will not fix it but will refund if it's under warranty and you send it back to them. Bummer that they aren't supporting their own products
Не увидел главного,это аккумулятор. Какой он формы,как подсоединяется и где стоит,сколько у него напряжение и миллиампер. Что бы хоть приблизительно знать,чем можно заменить.
@@Instinctokz30rus Да,получилось! Там 18650 стоят меньшей емкости...Два штуки своих поставил на 3000мАч каждый,литокала китайские... Самое сдожное было,расчистить из изоляции деновской старые акб и вытащить контролер не сломав что нибудь на плате... Перепаивал контроллер зарядки к новому аккуму... Снова заизолировал и установил... Там на разъёмах всё,не сложно,и акб на разъёме.
Hey, weißt du zufällig ob der Akku austauschbar ist? Meiner macht nach fast 2 Jahren schlapp und ich würde gerne falls möglich einen neuen einbauen. Gruß
Hi Speaker Toni, i’m I am really interested in buying a unit but I have read that this speaker has a static noise very annoying at low volumes. is this true?
I want to try this speaker but after the disappointing JBL Charge 2 I am reluctant. It no longer holds a charge after 14 months. Is this a common problem with these small Bluetooth speakers?
Dylan Johnston did you not charge it for a long time? It seems to lack a battery discharge protection which eventually leads to a broken battery. This is what probably happened to my Denon.
@@wolow1zard741 Honestly that is rather misleading though it is true. Reason being most other speakers use 3.7 Volt batteries where the Denon udes 7.2 Volt. Wich means it more or less has a battery equal to a 6000 mah 3.7 Volt battery, when comparing to other speakers, smartphones powerbanks etc.
Denon Envaya Bluetooth speakers are equipped with a Battery Safety Modewhich prevents the battery from being damaged by deeply discharging it. If the Envaya speaker enters this mode, it will be switched off and switching on again is prevented. To deactivate this mode, simply connect the supplied USB cable to a power adapter and charge the battery for at least one hour. A few minutes after starting the charging process, the Envaya can be powered on normally and used as usual.
Amazing that it can sound that good without a tweeter...and pressed steel simple chassis for the drivers (i was not impressed by the build of the drivers) and simple contacts (soldered contacts gives better transfer than car connectors) is something that generally should be avoided but on such small drivers it probably does not matter much. I would expect forged aluminum chassis at least and maybe some kind of cone knob or something out of the ordinary. If i remember right you thought the onkyo x6 was a close competitor to Denon? In this video ruclips.net/video/l_w8Beg6SPEA/видео.htmlny side by side between those two coming :) ? Oh, since you buy speakers for thousands of Euro, wouldn't it be a good idea to spend 50$ on a good screwdriver set before you pop a membrane with that horribly long screwdriver :) it hurt my soul seeing you pry off the grille with a screwdriver. There are great plastic tools for this on eBay almost for free. The one's you use to pry off phone screens. Thin flexible and slide in to cut the glue without risk of damaging the grille (that screwdriver must have made marks 😨)
Just because I own expensive speakers it doesn't mean that I'm buying everything no matter what it is or how much it costs. I`ve never broken a single speaker while disassembling it so why spend more money on tools if you can invest it in more expensive speakers;)
Music from intro please!! Toni, why is it so hard to give me the name of just 2 songs? This one and the piano-retro sounding one? You will make me so happy!
This Spikere use TPA3128D2 amplifier 5w upgred from bose sound link mini 2 bose use TPA3118 but. Denon use 4 booster coil and a singel FMB DSPN prosesor ARMcore that way the sound good !.. JKR KR 1000 use 5 coil sound good enough but distortion at 3d mode but the price is 31usd i can't complain about jkr,
@@speakertoni2680 Toni is the Viba Reykjavik worth buying over the Denon Envaya DSB-250? I read some comments saying the City is better than the Viba Reykjavik. I mainly listen to Smooth Jazz, Bossa Nova, and Classical. Thank you!
Speaker Toni die Membran sieht aus, wie an jedem zweiten Billigspeaker und zerkratzt direkt. 🙈 Beim ersten envaya damals, sah sie meiner Meinung nach wertiger aus Sind übrigens Baugleich mit denen vom JBL CHARGE 3
This is not a "disassembly" video. You just remove the cover, that's it. The other 13 minutes of the 14 minutes long video you show speakers in action (pointless) and talk about the price of the device. 🤔 Das Video hält nicht, was es verspricht. 👎
Speaker Toni haha I can't wait to see it! I check your channel alot to see if it's up yet! I really want to see what you did for 400 dollars. I became obsessed with building my own. It took me three tries until I finally got something I was happy with. I found it so hard to keep it cheap and do what I wanted. So it ended up costing like 6 or 700 euro in components and the first prototype was only 150 euro.
Ух ты! Спасибо! 5+ ★. Не часто увидишь в разборках такие вещи.
где разбор!? чел просто снял чешую. я даже не увидел батарею. что за чушь!!??
Тогда Где ещё видео этой колонки чтоб разбор был сильнее ?
After 3 yrs my Envaya is running well and love it. It would be interesting to know how we could replace the batteries. I use my speaker 4hrs a week minimum.
I would like to know this as well. My battery is giving some trouble. Not charging fully, and self discharging. Have tried the reset and everything. It’s open in front of me right now. Unable to get to the battery.
ruclips.net/video/JTW9Q_WlaxQ/видео.html
@@GiriGagan so it's not possible to build in a new battery? I wanted to change mine aswell since it drains pretty fast after 2 years of heavy usage
@@lukasmischlich1178 I am going to attempt a battery swap. will report here with details once its done.
@@GiriGagan me too
People complain about Denon BT series battery self discharging issue, did you notice that?
aktunav yes, my one has it too but Denon seems to just ignore this issue completely
I see, but it cannot be accepted for this price point :(
Will it die after 1 year of normal use?
This also makes me consider if I should get one. I do like the sound, but I wouldn't like the battery to quickly waste away
I'm really put off by this issue as well. Is it worth buying despite it?
Did you try going "deeper" in the end? I would like to buy but if it's hard to change the battery pack DIY I probably won't. Those li-ions will die in a year easily if they have self discharge issues in my opinion. How were things in the past with Denon bluetooth speakers? Did they ever addressed issues with older models and did some firmware updates or they don't give updated on their products?
Battery swap will be difficult and probably not worth the risk.
No, they just complete ignore this issue.
Well that kinda sucks. I saw they had some firmware updates for their other gear but couldn't find anything on Envaya line. They should really do something for speakers. I like it as it is with few of the flaws it has but googled about the old envayas and see bunch of them stopped working after some time I think I might pass on 250 . Or at least wait a year and ask for a review then :D
ruclips.net/video/JTW9Q_WlaxQ/видео.html
@@gammelgemse I got jbl flip in the end. Great speaker that one. Shame it had problems with this and that. It seems denon always makes something amazing like that but then it has weird flaws.
Hi Toni, i have a question about a static nosie on low volume. Did you notice that problem? I have Bose Revolve+ and it's very audible especially when you listen to quiet music.
Auch hier kann man mal wieder sehen, dass sich Lautsprechermembranen bewegen müssen, um Schallwellen zu erzeugen. Nettes Video, jetzt weiß ich etwas besser Bescheid über meinen Speaker, ohne ihn selbst auseinendergenommen zu haben, danke Tony! Ich hab geahnt, dass er größere Treiber haben muss als mein Flip 4, weil doch einiges mehr an tiefen Tönen heraus kommt. Komisch, dass Denon schreibt, dass darin 40 mm Treiber verbaut sind. Daumen hoch für's Video!
Hi Toni, Are the drivers wired in reverse polarity so the radiator pushes out rather then in during a bass thump? Building my own speaker hence the interst. Love yr vids and hello from Penang!
I have this speaker, it was great whilst it worked. The passive radiator has split along the seals, do you have any advice on replacing it? Thanks.
looking good, sounding good
you make realy good videos I love you quality of videos
toni what you think are the best option around 90-130 usd portable speaker ?
richard attoun if you can find the Denon for that price it’s still a great option
the Anker Soundcore Motion+ is another great choice and it’s always below 100$
Do you know where can I buy new battery for 250bt model?
I'm having issues with the battery only charging to 50% after less than a year owning it. Apparently Denon has discontinued it and will not fix it but will refund if it's under warranty and you send it back to them. Bummer that they aren't supporting their own products
@Speaker Toni thoughts?
why the go play have the drivers of ferrite magnet and this small speaker have
neodymium??
nice video
Hey Toni i have a question for you ,can you guees with what speaker's drivers looks the Envaya ones ?
Edi03super Eduard12 JBL charge 3
Anil T. Yeah,thats the one
Edi03super Eduard12 😀
Не увидел главного,это аккумулятор.
Какой он формы,как подсоединяется и где стоит,сколько у него напряжение и миллиампер.
Что бы хоть приблизительно знать,чем можно заменить.
Получилось поменять аккумулятор? Если да, подскажите пожалуйста
@@Instinctokz30rus
Да,получилось!
Там 18650 стоят меньшей емкости...Два штуки своих поставил на 3000мАч каждый,литокала китайские...
Самое сдожное было,расчистить из изоляции деновской старые акб и вытащить контролер не сломав что нибудь на плате...
Перепаивал контроллер зарядки к новому аккуму...
Снова заизолировал и установил...
Там на разъёмах всё,не сложно,и акб на разъёме.
Hey, weißt du zufällig ob der Akku austauschbar ist? Meiner macht nach fast 2 Jahren schlapp und ich würde gerne falls möglich einen neuen einbauen. Gruß
Ich vermute schon dass man ihn austauschen kann
Bin mir aber leider nicht sicher wie
ruclips.net/video/JTW9Q_WlaxQ/видео.html
Good test thank"s !!!
Hi Speaker Toni, i’m I am really interested in buying a unit but I have read that this speaker has a static noise very annoying at low volumes. is this true?
well didn't notice that on mine
I want to try this speaker but after the disappointing JBL Charge 2 I am reluctant. It no longer holds a charge after 14 months. Is this a common problem with these small Bluetooth speakers?
no not really , my old envaya mini still works really well (more then 2 years)
I have the exact same one as that. However I cannot get it to turn on and when I can I have no sound. Any advice would be great! Thanks
Dylan Johnston did you not charge it for a long time?
It seems to lack a battery discharge protection which eventually leads to a broken battery. This is what probably happened to my Denon.
Hi, do you know how many mAh is the battery? Thanks in advance
3000mAh
@@wolow1zard741 Honestly that is rather misleading though it is true. Reason being most other speakers use 3.7 Volt batteries where the Denon udes 7.2 Volt. Wich means it more or less has a battery equal to a 6000 mah 3.7 Volt battery, when comparing to other speakers, smartphones powerbanks etc.
Denon Envaya Bluetooth speakers are equipped with a Battery Safety Modewhich prevents the battery from being damaged by deeply discharging it. If the Envaya speaker enters this mode, it will be switched off and switching on again is prevented.
To deactivate this mode, simply connect the supplied USB cable to a power adapter and charge the battery for at least one hour. A few minutes after starting the charging process, the Envaya can be powered on normally and used as usual.
Emanuele Forlì maybe he just wants to help people how to deal with that issue
well done Toni...keep up the good work.
can you open battery ? ...............................................
ruclips.net/video/JTW9Q_WlaxQ/видео.html
What's better ? Jbl charge 3 or denon
I had the JBL charge 3 and now have the Denon. The denon destroys the charge 3.
Is it still IP67 after only removing the grill?
Amazing that it can sound that good without a tweeter...and pressed steel simple chassis for the drivers (i was not impressed by the build of the drivers) and simple contacts (soldered contacts gives better transfer than car connectors) is something that generally should be avoided but on such small drivers it probably does not matter much. I would expect forged aluminum chassis at least and maybe some kind of cone knob or something out of the ordinary. If i remember right you thought the onkyo x6 was a close competitor to Denon? In this video ruclips.net/video/l_w8Beg6SPEA/видео.htmlny side by side between those two coming :) ?
Oh, since you buy speakers for thousands of Euro, wouldn't it be a good idea to spend 50$ on a good screwdriver set before you pop a membrane with that horribly long screwdriver :) it hurt my soul seeing you pry off the grille with a screwdriver. There are great plastic tools for this on eBay almost for free. The one's you use to pry off phone screens. Thin flexible and slide in to cut the glue without risk of damaging the grille (that screwdriver must have made marks 😨)
Just because I own expensive speakers it doesn't mean that I'm buying everything no matter what it is or how much it costs.
I`ve never broken a single speaker while disassembling it so why spend more money on tools if you can invest it in more expensive speakers;)
Haha, thats one way i guess :)
Music from intro please!! Toni, why is it so hard to give me the name of just 2 songs? This one and the piano-retro sounding one? You will make me so happy!
This Spikere use TPA3128D2 amplifier 5w upgred from bose sound link mini 2 bose use TPA3118 but. Denon use 4 booster coil and a singel FMB DSPN prosesor ARMcore that way the sound good !.. JKR KR 1000 use 5 coil sound good enough but distortion at 3d mode but the price is 31usd i can't complain about jkr,
Great video loved it!!!
Hi, anybody knows which driver should be used to replace failed one? Thx
3:31 *oh yeah mmmh good excursion baby juuuust like that*
Good product bad after sales support, you’re better off with the similarly priced Go + Play by Harman.
Took apart the XB3. Doesn't seem cheap to me.
But definitely not better than the Reykjavik or the Denon
Speaker Toni I know. Those two are really high quality built.
@@speakertoni2680 Toni is the Viba Reykjavik worth buying over the Denon Envaya DSB-250? I read some comments saying the City is better than the Viba Reykjavik. I mainly listen to Smooth Jazz, Bossa Nova, and Classical. Thank you!
dont make a tear-down video if you dont tear-down it all the way LMAO
All full range speaker has better results in high and medium frequency. ;)
Nice intro
Warum berichtet bei mir eine LED weniger beim Batterie Check...
Chris wat,
I love this speaker... I knocked it off the window sill and it died 💔😭
I came here for the disassembly and you didn't do much ;/
Sakura import Japan UK oh, do you have another Envaya for me which I can disassemble and risk breaking?
Sakura import Japan UK oh, do you have another Envaya for me which I can disassemble and risk breaking?
Sakura import Japan UK oh, do you have another Envaya for me which I can disassemble and risk breaking?
UPLOAD MARATHON!!!!
nice
the fck is this, disassembly where you don't disassemble.
I didn’t say it’s a full disassembly
u can shut up now
Great 😂😂😂
Song at 6:15
Jan Leitgeb its over 9000 search it on SoundCloud
Hätte nicht gedacht, dass die Treiber so billig ausschauen :(
TheChris94 was sieht denn an den billig aus?
Speaker Toni die Membran sieht aus, wie an jedem zweiten Billigspeaker und zerkratzt direkt. 🙈
Beim ersten envaya damals, sah sie meiner Meinung nach wertiger aus
Sind übrigens Baugleich mit denen vom JBL CHARGE 3
Kommt es nicht eigentlich auf die Daten und Parameter des Chassis an oder nur auf das Material der Membran?
Speaker Toni die braucht man nicht in Zeiten von DSP.
Da bekommt man sogar einen halbwegs neutralen Klang aus billigsten Breitbändern 🙈
du laberst echt nen müll
You talk too much
This video has a lot of wrong information about this speaker and disassembly!
where?
First
This is not a "disassembly" video. You just remove the cover, that's it. The other 13 minutes of the 14 minutes long video you show speakers in action (pointless) and talk about the price of the device. 🤔
Das Video hält nicht, was es verspricht. 👎
@@svenlima lügenpresse
@@speakertoni2680 Richtig.
@@svenlima Korrekt.
the grill is just clued on? what kind of dipshit build quality is that
Peter Pan he also said there are some clips
Boring, show me the speaker you built
Its not finished yet;)
Speaker Toni haha I can't wait to see it! I check your channel alot to see if it's up yet!
I really want to see what you did for 400 dollars. I became obsessed with building my own. It took me three tries until I finally got something I was happy with. I found it so hard to keep it cheap and do what I wanted. So it ended up costing like 6 or 700 euro in components and the first prototype was only 150 euro.