Ah, I didn't catch that! It wasn't super clear in his video. The edges looked identical to me, so I figured my method would be the easiest way to keep the UV coating on the final cube, but that clearly didn't work out.
@@Z3Cubing he said he mixed them up and he shops at a shop called SpeedCubeShop aka ScS and got uv coated 11M pro and 11M duo and 11M pro black plastics
Man, it's weird seeing mods done on such hightech speedcubes. I remember when people would mod shengshous and other cheaper 3x3s to make them perform better, but just hearing someone say they are going to mod a gan 12 maglev just shocked me at first haha
Imagine a mega ultimate maglev cube where the core to corner magnets even repel each other AND center to edge magnets (from the valk M elite) maglevs too
Aww that’s unfortunate that Calvin wouldn’t let you use it. I was scrambling and there were many worse legal imperfections that I asked him about and he said they were fine.
With the MagLev and the extra strength core magnets, my cube is 88 grams. That's about average for a speedcube, but noticeably a little heavier than most high-end ones.
I just modded my wrm 2021 with maglev because it didn’t have it at first, but now I should probably put corner to core magnets in my wrm since now it’s basically the one Z3 used in his video just without purple internals.
Thank you that was a lot of information and quite a bit of entertainment as well. I am glad you did all the research for me. Can you please give me the specs for the extra magnets you added to the WRM core, I would like to do the same. Thank you for your expert advice and valuable time. Stay safe and cube on!
Hi i just have a question. for the upgrade on the wrm maglev 2021 when u used the kit, u used extra magnets on the corners, and i would like 2 know what size the extra magnets were and where did u find/get the magnets? I would also like to know the lenght of the mangets were pls. thx.
I just got the “gan 14 maglev” wich was really amazing! quality:infinite/10 just uncontrollable and it also broke when I was trying to do a solve on it,then I got a dnf and 2 +2s wich was mind blowing to me😅
Suggestion: Instead of GAN 11 M Pro pieces in the gan 12 maglev, you should do the gan 12 m leap pieces since the GAN 12 M Leap is better than the gan 11 m pro
what are the sizes of the magnets for the magnetic core on the weilong wrm? i'm interested in getting one of those along with the cube and i think i'll favor a more strong magnetic feel for the core so i wanna plan in advance
You can't easily remove any of the magnets to replace them, but I did manage to add some 1.5x3mm cylindrical magnets on top of the existing corner ones to make it feel stronger. You could probably get away with something slightly bigger, but likely not more than about 2mm thickness.
I'm having the same problem... I can't decide which of these two cubes is my main since I got them! They're both excellent in their own ways, and the GAN can orient its own layers but the MoYu does feel more controllable. I also need replacement tiles on my MoYu due to sand damage, which unfortunately would cost more than a GAN 12, at least if I were to order replacement parts from KewbzUK.
The first moyu cube to ever have core magnets is the moyu super weilong in which the 20 magnet ball core maglev is more expensive than a gan 14 maglev uv ( gan 14 maglev uv worth 88 usd while moyu super weilong 20 magnet ball core maglev is worth 90 usd!!!!!!!!!!!!). Moyu super weilong 20 magnet ball core maglev is the most expensive 3x3 speedcube currently.
Can someone explain the relevant speed cube rules to me, an outsider? Because it seems untenable that in a competition to see who can solve a cube the fastest, things like maglev, coremag, edgemag, and lube are legal but a scratch on one of the piece faces isn't.
The relevant regulation is 3j ( www.worldcubeassociation.org/regulations/#3j ), since the scratch on that piece makes it distinguishable from other pieces like it. I think the majority of delegates wouldn't notice or care about that particular scratch, but oh well.
Because it would've been more work than to just put the corners back. But now that I know the center caps aren't interchangable, I suppose I could try it. Update: The edges are really hard to take apart, and don't seem to be compatible. :(
should I lube the core maglev? I assume there is still contact between the screw and the plastic of the center piece, and between outer side of the magnet with the plastic of center piece, should we lube it? note: I take example of moyu wrm maglev and rs3m maglev
I just bought a WRM 2021 magLev version. I didn't know it have a preinstalled core magnet kit but I broke 3 corner pieces magnets already on the day I receive it. Fix it with a super glue, later another one broke..........
Sorry, I'm a newbie on this... So... Did you install more magnets in the MOYU WEILONG WR M 2021 MAGLEV? Or was it the non-MAGLEV (standard) version? Was it worthy?
It was the MagLev version, but the mod I did had nothing to do with that. I added magnets to the inner part of the core and corners, whereas MagLev simply replaces the springs.
@@Z3Cubing And what was the real difference compared to the unmodified MagLev? Was it worthy? Hopefuly MoYu will launch a new version equal to your modified one! 😄
The best way to describe it is with edge to Conner magnets you feel them at the beginning and end of a turn but with corner to core magnets the you feel them in between turns to too not enough to finish turns like the gan 12 but enough to make turning easier with less force because the magnets are do so of the work and a added bonus of more control ability
@@screwcubing2428 ah yes the cube you use. I like tornado v2 more. Also I like how no one is gonna tell Z2 cubing that the maglev wrm isn't a wrm 2020...
J perm swapped the edges of the 11 M pro to the 12 too so there was no problem
Ah, I didn't catch that! It wasn't super clear in his video. The edges looked identical to me, so I figured my method would be the easiest way to keep the UV coating on the final cube, but that clearly didn't work out.
@@Z3Cubing he said he mixed them up and he shops at a shop called SpeedCubeShop aka ScS and got uv coated 11M pro and 11M duo and 11M pro black plastics
Zoom 3
@@Z3Cubing
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@@Z3Cubingyep
the lesson for this video is that j perm is a very lucky person
@@masterbuilder1862 noob
He already had a uv gan 11 tho
And the best lol
@@officialgaming1003 why is he a noob
@@leonardsantos6344 idk
Man, it's weird seeing mods done on such hightech speedcubes. I remember when people would mod shengshous and other cheaper 3x3s to make them perform better, but just hearing someone say they are going to mod a gan 12 maglev just shocked me at first haha
I could tell from your Weilongs video you must be a fellow cubing boomer
Hello
@@QwerkyCuber hi
@@ButteryCubes I mean, i started in 2016 so not exactly a boomer haha, but i was here when magnets werent used in cubes
ayy kewbix im a fan
Mods make everything better
Agree
Bias
True
If only I could mod myself
Not really everything
Imagine a mega ultimate maglev cube where the core to corner magnets even repel each other AND center to edge magnets (from the valk M elite) maglevs too
You should’ve put ‘Magnificent’ instead of ‘Amazing’ for the alliteration lol
Ikrr
Z3cubing: posts on Wednesday
Everyone: Wait, that's illegal!
I am confused
"Quick" bonus video for my week off school!
@@Z3Cubing Understandable. Have a great day!
@@Z3Cubing cool
This guy is so wholesome i love it
I really like your presentation! Your voice is buttery smooth and you present happily!!! love your videos!
Congrats, you have invented the Yoo Cube Double Deluxe
Aww that’s unfortunate that Calvin wouldn’t let you use it. I was scrambling and there were many worse legal imperfections that I asked him about and he said they were fine.
seriously, this video has me stressing out over microscopic scratches on my cube caused by my fingernails
Who is calvin
@@BirbGoBrrrrr5230 the World Cube Association delegate that inspected the cube
@@mxBug ok thanks
Honestly, that delegate was straight up power tripping if he considered a scratch a logo. That scenario makes the WCA look bad.
Thanks. These are the kinds of experiments that are really interesting right now.
Just bought the weilong WRM 2021 maglev and the core magnet kit, super excited to try them out.
Im still waiting on my core magnet kit to arrive - I'm scared of finding the final cube too heavy
With the MagLev and the extra strength core magnets, my cube is 88 grams. That's about average for a speedcube, but noticeably a little heavier than most high-end ones.
@@Z3Cubing I figured I'd try it out by sticking the corner magnets on w some sticky putty or smth, so I can still reverse it if it doesn't work out
Personally, I’m looking forward to the extra weight. Makes the cube feel higher quality and dense. Maybe that’s just me.
@@WTF-Cubing I just notice that my hands get tired quicker
@@jeanneb6320 Understandable. I treat it like it’s building fast twitch muscle fibres faster, like a work out.
I never imagined this much drama in a cube video 😂
I just modded my wrm 2021 with maglev because it didn’t have it at first, but now I should probably put corner to core magnets in my wrm since now it’s basically the one Z3 used in his video just without purple internals.
goofy ahh cuber
You could put the center caps from the gan 12 leap on the maglev and the whole thing will be frosted
I actually have agressive turning style but i can change and now i just like medium turning style
I love the alliterative title.
Ah yes, the Gan 11 12 M Pro Maglev 🤣
You should combine both
Imagine gan collaboration with moyu
Congrats you get to go to a comp, i might be going to my first comp soon because I started end of 2020 so couldn't go to comps
could you use the orange cap from the gan 12 leap or is it like the 11 m pro and falls out
Which magnets did you use to upgrade the CH DIY kit?
I'm betting that's unintentional alliteration
Thank you that was a lot of information and quite a bit of entertainment as well. I am glad you did all the research for me. Can you please give me the specs for the extra magnets you added to the WRM core, I would like to do the same. Thank you for your expert advice and valuable time. Stay safe and cube on!
for the catching fix part all you have to do is spawn out the pieces then the colors
Hi i just have a question. for the upgrade on the wrm maglev 2021 when u used the kit, u used extra magnets on the corners, and i would like 2 know what size the extra magnets were and where did u find/get the magnets? I would also like to know the lenght of the mangets were pls. thx.
That a lot of M in the title
which one would you prefer, ch tornado v2 or this wrm?
That's a lot of m's in the title
I'm getting the moyu
I'm really excited
I've got a MoYu WR M 2021 Maglev coming in the post at the moment I'm so excited
Have you tired to rotate the corners and make sure the magnets line up and then swap the coating
I just got the “gan 14 maglev” wich was really amazing! quality:infinite/10 just uncontrollable and it also broke when I was trying to do a solve on it,then I got a dnf and 2 +2s wich was mind blowing to me😅
Him: “I’m almost 2 years before covid!”
RUclips: *OMG HE SAID THE WORD*
Suggestion: Instead of GAN 11 M Pro pieces in the gan 12 maglev, you should do the gan 12 m leap pieces since the GAN 12 M Leap is better than the gan 11 m pro
9:31 Wow he created a mod called the Gan 11 m pro maglev
Did adding the extra magnets make it better
what are the sizes of the magnets for the magnetic core on the weilong wrm? i'm interested in getting one of those along with the cube and i think i'll favor a more strong magnetic feel for the core so i wanna plan in advance
You can't easily remove any of the magnets to replace them, but I did manage to add some 1.5x3mm cylindrical magnets on top of the existing corner ones to make it feel stronger. You could probably get away with something slightly bigger, but likely not more than about 2mm thickness.
@@Z3Cubing alright! i wasn't expecting a quick response (or a response at all really) but thanks!
Qiyi should make a maglev cube
nice alliteration in the title bro
Ship Of Theseus
Replace a ship's parts with all-new ones. All of them. Is it still the same ship?
the problem with the gan 12 is not the corners, its the edges
Hardworking king is back again
Wdym he's back? He's never been gone l o l
I'm having the same problem... I can't decide which of these two cubes is my main since I got them! They're both excellent in their own ways, and the GAN can orient its own layers but the MoYu does feel more controllable. I also need replacement tiles on my MoYu due to sand damage, which unfortunately would cost more than a GAN 12, at least if I were to order replacement parts from KewbzUK.
Get a Gan 13
The first moyu cube to ever have core magnets is the moyu super weilong in which the 20 magnet ball core maglev is more expensive than a gan 14 maglev uv ( gan 14 maglev uv worth 88 usd while moyu super weilong 20 magnet ball core maglev is worth 90 usd!!!!!!!!!!!!). Moyu super weilong 20 magnet ball core maglev is the most expensive 3x3 speedcube currently.
Finally I get to see core magnets in a maglev cube.
What about the yo cube deluxe moyu wrm maglev with lube and core magnets
I did that same thing to my gan 11 m pro ive never been to a cubing comp yet so im glad i got the new gan one 😂
Can you magnetize a gan 11 air??? Cause I have one and I want to magnetize it , there is no video on it a look all over RUclips
Did you not have the gan 13 leap frosted
pls review the yoo cube!
You know, the magnets may have been repulsive but you could have flipped the colors and it would have worked.
Not how it works
Amazing!
It’s UV coated you can use a hair drier to fix it
lolool
Oooh, that sounds interesting. Just it just actually just melt back into the right spot?
@@Z3Cubing Any update on that?
How big are the core magnets on the weilong
Wrm
Where did you get the magnets extra longer magnets for the WR M?
couldn't you just take off the logo on the white side using sugar?
Can someone explain the relevant speed cube rules to me, an outsider? Because it seems untenable that in a competition to see who can solve a cube the fastest, things like maglev, coremag, edgemag, and lube are legal but a scratch on one of the piece faces isn't.
The relevant regulation is 3j ( www.worldcubeassociation.org/regulations/#3j ), since the scratch on that piece makes it distinguishable from other pieces like it. I think the majority of delegates wouldn't notice or care about that particular scratch, but oh well.
...why didn't you just swap the caps of the edge pieces?
Because it would've been more work than to just put the corners back. But now that I know the center caps aren't interchangable, I suppose I could try it.
Update: The edges are really hard to take apart, and don't seem to be compatible. :(
should I lube the core maglev? I assume there is still contact between the screw and the plastic of the center piece, and between outer side of the magnet with the plastic of center piece, should we lube it? note: I take example of moyu wrm maglev and rs3m maglev
Lesson of the video: Don't ask the official anything cuz he'll make up a rule you are breaking on the fly.
Hey what magnets are those that you added to the core kit
GAN 11 12 Pro Maglev
Jperm also swapped the edges..
Nice modification! Do the core magnet kit work also for the GAN 356 RS ? It looks quite similar to your weilong cubr.
I doubt it.
should've been "magnetic mods make my main magical!"
What is your WRM maglev settings?
He could have used the leap center caps
magnet size?
I still lubed my core on the WR M Maglev because of a high pitched squeal from the magnets…
Guess maybe SCS can UV coat the gan 11 pro pieces.
Alliteration in the title
couldnt you rub off the gan logo?
I just bought a WRM 2021 magLev version. I didn't know it have a preinstalled core magnet kit but I broke 3 corner pieces magnets already on the day I receive it. Fix it with a super glue, later another one broke..........
what is the size of the maglev magnets in the 2021. I want to modify mine, and I don't want to buy the maglev
The pieces on the Gann 11 and pro and again 12 are exactly the same how does swapping them out help with the catching?
Love ur content
what size magnets are used on the core magnet mod you mention at 5:00
I found out they are the same size magnets as in the cubicle's rs3m magnet mod kit
@@austinftwXD does that mean you can use the rs3m's corner magnets to do this mod?
I’m wondering if the core magnet kit is compatible with other Moyu cubes like the rs3m or the Aulong
its not but the company that makese them has a rs3m version
i have an idea flip the piece magnets of the gan 12 😀
what size magnets can u link them?
I think you can only have the same polarity if you have the same coding on the cube like the texture
i think you're talking about "coating"
My god just use the 11 m pro pieces. The 12 and 11 are different...
Do the purple internals make look ahead harder?
what
No.
Actually I am wondering what core setting you are using on the GAN 12 and does it differ from the settings on your 11 M Pro
UV coating is not scratch proof?!
Not with a screwdriver at full force.
"and it just feels like *buahh* "
Z3 cubing could have swapped the center pieces
Sorry, I'm a newbie on this...
So... Did you install more magnets in the MOYU WEILONG WR M 2021 MAGLEV? Or was it the non-MAGLEV (standard) version?
Was it worthy?
It was the MagLev version, but the mod I did had nothing to do with that. I added magnets to the inner part of the core and corners, whereas MagLev simply replaces the springs.
@@Z3Cubing
And what was the real difference compared to the unmodified MagLev? Was it worthy?
Hopefuly MoYu will launch a new version equal to your modified one! 😄
Last night I thought I lost my lube, Looked at my table just now saw it looked away and said WAIT WHAT THE HECK
Hey Z3 how much different does core magnets compare to non core magnets?
The best way to describe it is with edge to Conner magnets you feel them at the beginning and end of a turn but with corner to core magnets the you feel them in between turns to too not enough to finish turns like the gan 12 but enough to make turning easier with less force because the magnets are do so of the work and a added bonus of more control ability
Gan 11.5 Maglev
I have one question? What is the best 3x3 cube for around 30$? Gts2m, xmd tornado v2 or tengyun v1? Maybe something else?
Wrm 2021
If you have more money you can buy the CH version or Maglev
@@screwcubing2428 ah yes the cube you use. I like tornado v2 more. Also I like how no one is gonna tell Z2 cubing that the maglev wrm isn't a wrm 2020...
Wow alliteration
What are y’all’s mains?
if you dont want to mod your cubes, the GAN 12 M Leap should be your main
Magnetic Mods Made My Main Magnificent
Fixed your title