I highly recommend these kits for anybody looking at getting into building pedals. I'm currently building the 7-minute fuzz and the Berserker fuzz for upcoming videos and couldn't be happier with them and the support I received from Paul.
Hi, i cannot download the LPB1 type Schematic, i did follow your download instructions, i have the parts and this will be my first attempt at breadboarding, many thanks Mike Belgium
Is there any Guitar Pedal that Receive 2 inputs ( Like 2 guitars play at the same time), and have 1 output to connect to an Amp? I'm new to the Pedal, so I'm not sure. I did some search about it and It gave me the result about the ABY switch pedal, however those have 2 outputs not 2 inputs. Can you give me some recommendation?
bruh i’ve been needing a video like this and wondering why i haven’t seen this vid yet from your channel but it turns out you just posted it!! awesome. could you do a follow up on what tools and things we will need to start off after we buy all this stuff? as a beginner i have no equipment and no knowledge of where to start :)
@@mikechecka292 what’s it matter to you? who has a DEATH pfp , how old are u, like five? also anyone who’s named mike already started off life with a bad draw. good day sir
I've made a good few of your kits, and I think they've all been amazing bang for buck. I'm not sure what's left to order! I still think the 7 Minute Fuzz has to be one of the easiest and it delivers stupidly fun fuzz for what it is, plus it has that optional gain mod which I've got on the breadboard and need to finish. Night Drive was awesome as well :) I use the deluxe 3PDT PCT for most enclosure builds, but I keep mucking up the drilling of the footswitch and LED - too close, or too far apart, or wrong angle. Maybe a template for that PCB, just the lower third of the 125B/1590B just to make my life easier? :P
Thanks for your continued support Greg, i appreciate! I have added a pdf file to the Delux product page "PCB Layout for Drilling". You can print this off and stick it to the enclosure so you have a guide to drill for the Delux. Hope it helps!
Do you include step by step instructions with your DIY pedal kits? Or are they available at all as I am not at the point of figuring out what goes where by measuring resistance,capacitance, etc. I see the schematic but, nor am I there. I put together a Stew Mac DIY pedal with great success. As they included a step by step. I would LOVE to learn how to be able to populate the board without a step by step but I don't know where to start. Any suggestions? I do own an LCR tester (a basic OUT OF CIRCUIT tester) but I don't see that helping me other then checking for leakage etc. unless I am mistaken/noob. :) Let me know man! I am VERY interested in purchasing the FuzzMaster PCB kit, the full thing. Please get back to me when you have the free time! Take care!
I have alot of videos on the topic, and ..most.. kits have some accompanying video assembling guide. This is something i will think about though. An incredibly detailed build guy. Thanks for the suggestion!
yep. Most small orders are cheap to ship internationally ($4.50 or $9.00 aud untracked). If you add larger items, 3pdt footswitch and enclosures mainly it can get expensive, so i would recomment sourcing those locally.
I highly recommend these kits for anybody looking at getting into building pedals. I'm currently building the 7-minute fuzz and the Berserker fuzz for upcoming videos and couldn't be happier with them and the support I received from Paul.
I have purchased the Berserker Fuzz kit and it will be my first ever electronics project. Hopefully it's not too much of a mess!
:) I'm just starting in pedal making; your channel was already a godsend as it was and now there's this :D
He's the best.
Was trying to get my head around your site and this has really helped 👍 I'll send my order through soon
Nice work Paul.
Does the bazz fuss kit come with input/output jacks?
Hi, i cannot download the LPB1 type Schematic, i did follow your download instructions, i have the parts and this will be my first attempt at breadboarding, many thanks Mike Belgium
Is there any Guitar Pedal that Receive 2 inputs ( Like 2 guitars play at the same time), and have 1 output to connect to an Amp?
I'm new to the Pedal, so I'm not sure. I did some search about it and It gave me the result about the ABY switch pedal, however those have 2 outputs not 2 inputs. Can you give me some recommendation?
your webstore hasn't https
bruh i’ve been needing a video like this and wondering why i haven’t seen this vid yet from your channel but it turns out you just posted it!! awesome. could you do a follow up on what tools and things we will need to start off after we buy all this stuff? as a beginner i have no equipment and no knowledge of where to start :)
Are people still saying "bruh"? 🤨
@@mikechecka292 what’s it matter to you? who has a DEATH pfp , how old are u, like five? also anyone who’s named mike already started off life with a bad draw. good day sir
@@IanArizpeArroyo wtf ever,IAN🤣
How much would shipping to Finland cost? Including the enclosure.
Can you PLEASE sell a *COMPLETE* kit for the Arcadiator?? *PLEASE*.
I've made a good few of your kits, and I think they've all been amazing bang for buck. I'm not sure what's left to order! I still think the 7 Minute Fuzz has to be one of the easiest and it delivers stupidly fun fuzz for what it is, plus it has that optional gain mod which I've got on the breadboard and need to finish. Night Drive was awesome as well :)
I use the deluxe 3PDT PCT for most enclosure builds, but I keep mucking up the drilling of the footswitch and LED - too close, or too far apart, or wrong angle. Maybe a template for that PCB, just the lower third of the 125B/1590B just to make my life easier? :P
Thanks for your continued support Greg, i appreciate! I have added a pdf file to the Delux product page "PCB Layout for Drilling". You can print this off and stick it to the enclosure so you have a guide to drill for the Delux. Hope it helps!
@@DiyguitarpedalsAu That's awesome, thanks :D
can i order it through visa because im from india
If you buy the fuzz kits do you also need to do the power inverter or is that included
Dont need a power inverter, this is basically built into the fuzz kit (charge pump)
Do you include step by step instructions with your DIY pedal kits? Or are they available at all as I am not at the point of figuring out what goes where by measuring resistance,capacitance, etc. I see the schematic but, nor am I there. I put together a Stew Mac DIY pedal with great success. As they included a step by step. I would LOVE to learn how to be able to populate the board without a step by step but I don't know where to start. Any suggestions? I do own an LCR tester (a basic OUT OF CIRCUIT tester) but I don't see that helping me other then checking for leakage etc. unless I am mistaken/noob. :) Let me know man! I am VERY interested in purchasing the FuzzMaster PCB kit, the full thing. Please get back to me when you have the free time! Take care!
I have alot of videos on the topic, and ..most.. kits have some accompanying video assembling guide. This is something i will think about though. An incredibly detailed build guy. Thanks for the suggestion!
Do you ship to the UK
yep. Most small orders are cheap to ship internationally ($4.50 or $9.00 aud untracked). If you add larger items, 3pdt footswitch and enclosures mainly it can get expensive, so i would recomment sourcing those locally.
Do you ship to the U.S.? I noticed on the website that some orders are Aus only.
Hi Peter, we do. Basically everything except for enclosures and footswitches. We still can ship these, it can just be a little pricey. Cheers (Paul)