Absolutely very helpful. My first time and I don't even learn how to splice optic cable but teaching is detailing all steps to splice and I am very happy on that. Please keep helping people with your best teaching. Thank you.
First off, when dealing with any fiber you want to wear gloves because if that glass get in your skin it’s almost impossible to get out. Secondly you must make sure to zero or calibrate your parameters on your fusion splicer then everything else is spot on!!!
What brand SC and LC fusion splice-on connectors do you recommend using with the Ai-9 splicer from the video? the AFL and Corning ones don't fit the splicer magnetic holders. Thank you!
Unless that fusing machine can be adapted to ribbon splicing, then it's only good for single-fiber splicing. Plus, there are cleavers on the market with their own 'trash can' on the right side of the cleaver. Another plus, using alcohol wipes instead of a dispensing jar means a bottle of alcohol doesn't need to be carried. As to using a power meter to test completed splices, it may not be company policy for that to be done right after a splice is made. And, if you have 12 or more fibers to splice, you may not be given time to test each splice. Otherwise, this is a very informative video for those new to fiber splicing. Just don't forget to put the splice protector on before making the splice or you will feel rather silly when you realize you have to break the splice and do it again.
99.9% Reagent grade Isopropyl Alcohol, or Anhydrous 99.9% iso alcohol. Water is the enemy of optics in general because when it evaporates, it leaves residue.
I have no idea what's happening, i saw the machine is being sold in shopee, it piqued my interest so i googled it and here i am, i have no idea why the machine is recommended to me
I get that it does the thing it says, but seriously? An arc fusion splicer? Ok tony stark, make sure your fusion splicer safely with your quantum temporal gateway replicator. This machine does boring ass shit, and should therefore have a boring ass name. This guy: oh are you hungry? Well how about some sustenance from my three dimensional thermal injection unit. Me: you mean the toaster?
Because that is what it does is create a arc to melt the glass and fuse the 2 fibers The folks overseas tend to tell it to you straight sometimes instead of using shitty names like we do
Absolutely very helpful. My first time and I don't even learn how to splice optic cable but teaching is detailing all steps to splice and I am very happy on that. Please keep helping people with your best teaching. Thank you.
Thank you! That is the best explanation of a fusion splice I've ever seen.
Great video, thank you for all the steps and information.
Glad it was helpful!
Thank you! Great video, clear and precise.
Thank a lot it was a great video very straight ahead very informative
You said that you hoped is was a good video, it was a GREAT video! Thanks so much.
Great video, Actually I was practicing on the same exact Device today 👍🏾👍🏾
i am lineman here philipines also splicer,how nice youre tools sir😊
Nice description, good work teacher.👏
Muy buena explicación saludos desde Lima - Perú
First off, when dealing with any fiber you want to wear gloves because if that glass get in your skin it’s almost impossible to get out. Secondly you must make sure to zero or calibrate your parameters on your fusion splicer then everything else is spot on!!!
First off, you shouldn't let your wife's boyfriend bully you so much...
Great instruction session. Maybe just change your dark background to clearly show the tools etc.
Parts of the fusion and tolls to use for splicet
I don't have this kit, but the video was great!
do you have the soc adapters for the fiber splicer you using ?
What brand SC and LC fusion splice-on connectors do you recommend using with the Ai-9 splicer from the video? the AFL and Corning ones don't fit the splicer magnetic holders. Thank you!
Unless that fusing machine can be adapted to ribbon splicing, then it's only good for single-fiber splicing. Plus, there are cleavers on the market with their own 'trash can' on the right side of the cleaver. Another plus, using alcohol wipes instead of a dispensing jar means a bottle of alcohol doesn't need to be carried. As to using a power meter to test completed splices, it may not be company policy for that to be done right after a splice is made. And, if you have 12 or more fibers to splice, you may not be given time to test each splice. Otherwise, this is a very informative video for those new to fiber splicing. Just don't forget to put the splice protector on before making the splice or you will feel rather silly when you realize you have to break the splice and do it again.
Thank you very much I have learnt at lot
Thank you for this !!
No problem 😊
Thank you Joe!
Our pleasure!
Excellent video. Thank you.
Great video tutorial
What is the best temp for the oven ?
How to splice active fiber, it does not detecting it
THANKYOU FOR YOUR INFORMATION❤
my splicer screen can't turn on after firmware update . That is Why?
Hell ya, I got a fujikura digital arc fusion splicer compliments of Lumen Technologies
thanks a lot that was very helpful
I have 15 years of experience in this field. My job is cable or internet connection salary is not enough
Thanks great video
Nice sir
Thanks. How to get in your email address? For more details regarding Certification
signal fire al9?
Thanks bro it's really help me
Very good ❤
my fussion splicer machine is not allign pls what can i do
It depends on a lot of things like the manufacturer, environment, the fiber you are using. Hard to say without being there.
Were is the heat button
Alcohol type?
99.9% Reagent grade Isopropyl Alcohol, or Anhydrous 99.9% iso alcohol. Water is the enemy of optics in general because when it evaporates, it leaves residue.
WTF is a VFL port?
I have no idea what's happening, i saw the machine is being sold in shopee, it piqued my interest so i googled it and here i am, i have no idea why the machine is recommended to me
Where are you now, we can sell it to you
L⁰
very bad POV and lack of pre-splicing info. There are good parts too.
3600 dollars for that splicer....wow
1300 from Amazon. Signal fire ai-9
You are double-scoring the fiber during your cleaving process, big no-no.
I get that it does the thing it says, but seriously? An arc fusion splicer? Ok tony stark, make sure your fusion splicer safely with your quantum temporal gateway replicator.
This machine does boring ass shit, and should therefore have a boring ass name.
This guy: oh are you hungry? Well how about some sustenance from my three dimensional thermal injection unit.
Me: you mean the toaster?
Haha! Hey, we didn't name them! How about "Glass strand melter"? LOL
Because that is what it does is create a arc to melt the glass and fuse the 2 fibers
The folks overseas tend to tell it to you straight sometimes instead of using shitty names like we do