How to Replace Front Forward Control Arms 2012-2019 BMW 328i xDrive
HTML-код
- Опубликовано: 17 сен 2023
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com 1aau.to/ia/1ASLF01238
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2012-2019 BMW 328i xDrive Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This process should be similar on the following vehicles:
2009 BMW 328i xDrive
2010 BMW 328i xDrive
2011 BMW 328i xDrive
2012 BMW 328i xDrive
2013 BMW 328i xDrive
Tools you will need:
• Pry Bar 1aau.to/oWi/1AXAA00020
• 21mm wrench
• 17mm Socket 1aau.to/obBh/1AXAA00015
• 18mm Socket 1aau.to/oakM/1AXAA00043
• 21mm Socket 1aau.to/oakM/1AXAA00043
• 8mm Socket 1aau.to/obgG/1AXAA00017
• Channel-Lock Pliers 1aau.to/omg/1AXAA00139
• T40 Socket
• Torque Wrench 1aau.to/oaJZ/1AXAA00044
• Gloves 1aau.to/oahj/1AXSS00048
• Safety Glasses 1aau.to/oaae/1AXAA00343
• Floor Jack 1aau.to/o9t/1AXAA00068
• Pole Jack
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Was pretty much only here for torque specs thank you ! Liked 👍🏼
im pretty sure that is not 90 degree there hahahah
what's the fucking point of torquing the wheels, you already blasted it. And btw, the torque on F chassis vehicles is like 105ft/lbs
how much would this cost if you make someone repair it for you?
+Emiliano Adan We wouldn't be able to provide you with an estimated cost, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
A lot of rust down there 😮
Says, "You wanna replace the bolt." Yet he put in the old bolt anyways.... that rust in the middle is showing. No wonder it is difficult to torque it down to 90 degrees extra, me thinks because you are reusing the old TTY (Torque to Yield) bolt.